similar to: ActionWebService woes

Let''s say I have an application and I want to create an admin program that will show me who is currently online using the application. I don''t know the best way to do this. Assuming I am storing my sessions in the default PStore, I don''t suppose there is any method that lists all the active sessions, is there? The only way I can think of to do this is to setup a

Hi all, I think I've spotted a few stupidities (bugs) in the current version of kernel-utils (kernel-utils-2.4-13.1.80). I'm sure these are all propagated from upstream, but I hope someone could have a quick look to verify this and see if we either can push complaints upwards, or provide local fixes. The kernel-utils package provides several 'kernel-type' functions -

Hello Sir, (This applies to the RH8.0 supplied syslinux 1.75-3 and the upgraded tftp-server-0.32-1 from RH Rawhide) I'm having fun remotebooting my ViA EPIA box (an ITX form-factor 800MHz ViA C3 semi-embedded pc), and have landed on pxeboot as the 'best tool for the job'. Right now I have it working, but the documentation found elsewhere on the web has confused me. Specifically,

Hi all, I'm wondering if I'm running into some dependency issues on my CentOS5 test-machines. I've installed with a fairly minimal package set, updated, removed old kernels and am now experimenting with iscsi and gfs. I think I need kmod-gfs to get gfs -support, but there is only a version that suits the base-kernel, 2.6.18-8.el5. " [root at node02 ~]# yum install kmod-gfs

Hi all, I've upgraded my mysql-installation from the previous 4.1.12 version to the new 4.1.20 version, and I've found that a daemon I'm using suddenly can't log into the database anymore. I've verified the problem with the mysql command; [root at sciream ~]# mysql -upostfix -p mysql Enter password: ERROR 1045 (28000): Access denied for user

CentOS 4.3 (SMP, x86_64, Athlon64 X2) with all pre-4.4 release updates applied. Since I ran into the Yum issue at the previous upgrade, I first did yum upgrade to get the list of packages (6 to install, 206 to update). I then did yum upgrade yum (which passed without issues) yum upgrade sqlite (which passed without isseus). Fairly certain that yum now works correctly, I wanted to just do

Hi people, I ran into one of these silly issues I'd like to share as I think the reason behind it may be a flaw in the current initrds. The setup; Dual-Xeon Intel-chipset motherboard. SATA-disk attached to ICH, onboard Adaptec SCSI-controller. Installed system, updated packages, no problems. Basic, non-LVM partition setup - OS-disk is /dev/sda, single filesystem-partition /dev/sda1 is

Hi all, I'm running a pretty updated CentOS4 x86_64 server (Still on kernel 2.6.9-42.0.2, but appart from that fully up to date against the official repos) with a USB-disk attached (the USB-disk is a 750G Seagate disk in a Seagate enclosure) over a USB hub. I've noticed several times that after longish periods of activity, the disk drops out (log from last time, below). In this case,

Hi List, I've started looking into iSCSI, and I'm wondering if there is an iSCSI target (I've found the initiator in iscsi-initiator-utils) that ships with CentOS, or if not, what the recommended target would be. I'd like to export either a partition or (preferably) a file-as-a-partition. Yours, -S -- Simen Thoresen, Wulfkit Support, Dolphin ICS

Hi all, I'm sure this eventually will be resolved with a BIOS or kernel update, but in case someone experiences this on this or a similar motherboard, I thought I'd post a problem-and-workaround report. Platform CentOS5, x86_64 kernel-2.6.18-53.1.21.el5 Motherboard Asus M3a78-EMH HDMI SATA-controller configured as AHCI Experienced symptom; Periodic, ~20s lockups/freezes, several a

Hi all, I have a Opteron-machine with the MPT SCSI-controller (Symbios 53c1030). At least in i386-mode, mkinitrd does not seem to build a usable initrd for 2.6.13.x (.3 tested) with this kernel. With 2.6.12.6 it works fine. I have not tested this in x86_64 -mode yet. The symptom is that mptbase and mptscsih load, but mptscsih does not discover any controllers nor drives, and things like

Hi all, Another FYI-mail (and just to verify that I'm not going insane here); I recently purchased an ASUS M3A78-EMH HDMI -board with a tri-core Phenom. This is a small uATX-board with all the garnish integrated motherboards are supposed to come with, and fairly well supported in CentOS 5 and other modern distros. When I installed it (~2 months ago) the NIC was not supported; Ethernet

Hi all, Same system as my previous mail - Asus P5N32-E SLI motherboards, CentOS 4 x86_64. The kernel-supplied forcedeth driver works in kernel-smp-2.6.9-55.0.9.EL (both with and without acpi=off), but after upgrading to kernel-smp-2.6.9-67.0.4.EL, networking does not start. After trying dhcp, ifconfig reports 17 dropped TX packets (all other counters are empty). Ethtool reports the same

Hi all, I'm trying to troubleshoot my way thru a ACPI-issue on several machines with the Asus P5N32-E SLI motherboard (S775, Nvidia 680i chipset) http://www.asus.com/products.aspx?l1=3&l2=11&l3=397&l4=0&model=1459&modelmenu=1 This is CentOS 4 x86_64, and appears on all tested kernels, including kernel-smp-2.6.9-67.0.4.EL My symptoms are that the machine won't

Hi list, I'm having one of those 'I'm stupid' -problems with LVM on CentOS 5.2. I've been working with traditional partitions until now, but I've finally been sold on the theoretical benefits of using LVM, but for now I only have a huge pile of broken filesystems to show for my efforts. My scenario; I attach a disk, either over USB or iSCSI. I create a PV on this

Dear All, I am trying to use the felm function in the lfe package. However it does not seem to deal with missing values the way the lm function does. I wish to tell it na.omit or na.action = na.omit but it does not recognize this. I need to allow for missing values as I have different specifications and don't want to remove observations for all. Help on this will be greatly appreciated!

Hi, all. I want to use grey list in mail server, currently, i use postgrey to implement it. Any other recommended software? Thanks very much. ----- Best Regards. Zhang Huangbin - OpenBSD 4.2 -release, i386. - RHEL 5.1

I''m trying to add some executable code to my blog posts. How can I include this inside of a blog post and eval it? Charlie bowman http://www.recentrambles.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://wrath.rubyonrails.org/pipermail/rails/attachments/20060523/a3536408/attachment.html

https://bugzilla.samba.org/show_bug.cgi?id=3461 Summary: rsync is not atomic when temp-dir is on different device Product: rsync Version: 2.6.7 Platform: Other OS/Version: Linux Status: NEW Severity: enhancement Priority: P3 Component: core AssignedTo: wayned@samba.org ReportedBy:

I have create a web service to expose data from my application and am wondering why the associations are not showing up as values in my WSDL or SOAP response. In active record I have enabled eager loading so that the object set as the return type for the service call has all the associated data prior to the response. However, the associations are not showing up. Anyone have any ideas? I can