similar to: vlan interfaces and tc

Hi all, First, let me say I''ve been most impressed with how quickly and professionally people on this list ask and answer questions. Next, let me say that with which I need help is properly configuring strict PQ, and gathering certain stats. Specifically: - I need to create a priority queue with four queues (let''s say they are of high, medium, normal, and low priority) - I

I have to match my packets based on MAC address, which I cannot do in the POSTROUTING chain, so I do it in PREROUTING using MARK. Then, I match on the MARK in the POSTROUTING chain to do a CLASSIFY. But this does not seem to work: wireless-r1 bwlimit # iptables -L -v -n -t mangle Chain PREROUTING (policy ACCEPT 3353K packets, 941M bytes) pkts bytes target prot opt in out source

Hi! Do you know somthing about hfsc and bps? There''s no output for speed only for packets. Doesn''t hfsc support such a field? tc -s class show dev eth0 class hfsc 1: root Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) rate 0bit 0pps backlog 0b 0p requeues 0 period 0 level 2 class hfsc 1:11 parent 1:1 sc m1 0bit d 18.0ms m2 1000Kbit ul m1 0bit d 0us m2

Dear Community, sorry for the somewhat dumb question. Maybe someone has any pointer to how to setup the RED queue to mark pakets with ECN. In particular what are appropriate parameter settings for limit, min, max, etc. All my trials end up with either "RTNETLINK answers: Invalid argument", although the command line (at least for me) looks fine in regard to what is said on the

Hi all, Can you tell me where is the documentation for the new IFB (implemented in kernels > 2.6.16). Thanks in advance! Nikolay

Hi folks. For quite a while, I tried to use linux (cbq and htb) to control bandwidth in order to replace a cisco equipment used to play this role on our network. After trying here and there, with a bunch of different distros, different versions, different compilations, ... the closest I could get was as follows: (using htb.init and cbq.init) Desired BW ==> Achieved BW 128k ==> 404.78

Hi folks...!!! I´ve a problem that i did not solve it. i want to limit the DOWNLOAD to my hosts (upstream traffic for the firewall) using IMQ, If i classify by PORT (source or destination) all seems to be fine, but...BUT...if i want to restrict by IP addresss (internal IP address) i can´t do it, because my hosts go to Internet toward the firewall using NAT, so after NAT my IP address in

Hello. I have a linux server connected to a gigabit lan, and though that lan to a 768kbps/768kbps DSL modem. I''m trying to shape my webserver running on port 80/443 down to 512kbps, while leaving all other ports alone. The current configuration script that I''m using is as follows: tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1: htb default 99 tc class add dev

Hi, What exactly are the "tokens"? I thought each token allowed the sending of one byte, that tokens are stored in a bucket that can hold a max of "burst" tokens, and that this bucket is filled with tokens at "rate". But theory does not seem to explain the "tc -s .." output in the examples below. And I can''t figure out why or how... #tc qdisc

Hello, I have recently started looking at tc and iptables. I have an htb-queue with two classes 1:10 and 1:20 where 1:20 is the default. Then I use iptables to mark all packets I send out on eth1. I then filter marked packets into class 1:10. I expected all packets sent on eth1 to end up in class 1:10, but some packets still go to 1:20. Did I do it wrong? Thank you for any help. regards, David

Hi to all of you!!! I am a Computer Science student trying to do the pre-grade thesis. I am trying to develop a free software tool to help administrators to control the traffic. Right now this tool is based on tc and iptables. I am having some problems trying to understand tc and tc examples: - Why in almost every list of tc rules based on htb class, there is a "tc qdisc dev ... root ...

Dear all, I''m having real problems getting tc to do anything useful at all. I''m also under pressure to get this fixed before the students start arriving later this month (I work in a university). In short, I want each IP address to be hard limited to 128kbit down, 64kbit up, never to be allowed more bandwidth than this. It is also important that the latency remains

I don''t understand the following: root@jmnrouter:~# tc -s class ls dev vlan1 && tc -s qdisc ls dev vlan1 class hfsc 1: root Sent 0 bytes 0 pkts (dropped 0, overlimits 0) period 0 level 2 class hfsc 1:1 parent 1: sc m1 0bit d 0us m2 220000bit ul m1 0bit d 0us m2 220000bit Sent 0 bytes 0 pkts (dropped 0, overlimits 0) period 31304 work 7533852 bytes level 1 class hfsc 1:10

after i use "tc -s -d class ls dev eth0" will show statistic data about HFSC ,like this root@ubuntu:/home/shaper# tc -s -d class ls dev eth2 class hfsc 1: root Sent 0 bytes 0 pkts (dropped 0, overlimits 0) period 24 work 13844792199226589188 bytes rtwork 20937281664 bytes level 3461036864 class hfsc 1:11 parent 1:1 sc m1 30720Kbit d 10.0ms m2 30000bit ul m1 0bit d 0us m2

Hi folks...!!! I need to generate qdisc statistics to show my 4 class (10, 20, 30, 40), i`ve all working with HTB and so on, but i need to graph this results e.gwith RRDTOOL. I found a script made in perl, that can to graph my 4 class, but i need to know which IP address on my LAN are using the bandwidth too, in other hand i need to classify the traffic by IP to show. This is an out of my

With the below script, whenever I ping 10.0.16.10 (which matches the only filter I have), traffic still get''s sent to the default 1:2 class instead of 1:1 and I don''t know why... Any hints? (kernel 2.6.12, iproute2-2.6.15) tc qdisc del dev eth0 root > /dev/null 2>&1 tc qdisc add dev eth0 handle 1: root htb default 2 tc class add dev eth0 classid 1:1 parent 1: htb rate

My hfsc rule .. tc qdisc add dev eth2 handle 1: root hfsc iptables -t mangle -N ms-all iptables -t mangle -N ms-all-chains iptables -t mangle -N ms-prerouting iptables -t mangle -A PREROUTING -j ms-prerouting iptables -t mangle -A ms-prerouting -j CONNMARK --restore-mark iptables -t mangle -A ms-prerouting -p udp --dport 4444 -j MARK --set-mark 1 iptables -t mangle -A ms-prerouting -p udp -m

Hi All Is there any output that counts the number of dropped bytes (not packets) just as in "Sent" in "tc -s class" output? I have an HTB arrangement here I can see "dropped" in father/mother 1:0 qdisc but NOT in each class (they are all zeroes). These dropped are packets or bytes? Why these "drops" do not show thenselves in its own class(es) under its

Hi, I have a server and ten clients in a Gigabit network. The server has 125mbps network bandwidth. I want that the server has 40Mbps bandwidth reserved for client 1 (IP 192.168.5.141), and the rest bandwidth is for all other clients. My script looks like this (I use IFB for incoming traffic): #!/bin/bash export TC="/sbin/tc" $TC qdisc add dev ifb0 root handle 1: htb default 30