similar to: Problem with the tc statistcis

I rebuilt my notebook that has the atheros card in it, and forgot to save all of my setup to get it working. I am using dkms and the madwifi rpms from rpmforge. My modprobe.conf has a line: alias wifi0 ath_pci I can ifconfig wifi0 up But the command: /usr/sbin/wpa_supplicant wpa_supplicant -dd -D madwifi -i wifi0 -c /etc/wpa_supplicant/wpa_supplicant.conf fails. Now some of my old

Dear Community, sorry for the somewhat dumb question. Maybe someone has any pointer to how to setup the RED queue to mark pakets with ECN. In particular what are appropriate parameter settings for limit, min, max, etc. All my trials end up with either "RTNETLINK answers: Invalid argument", although the command line (at least for me) looks fine in regard to what is said on the

NetworkManager used to work fine for me but during the last few installations its a big hurdle in the wireless connectivity. I'm using Madwifi and its interface is correctly listed and working but I cannot connect to any wifi AP without NetworkManager. I've two interfaces: eth0 and wifi0. Starting NetworkManager doesn't show any notification icon in the top right in gnome and I believe

*Dear All, I run the below tcp dump on my asterisk server tcpdump -i eth0 -n -s0 -v udp port 5060 I got the following result 20:29:48.596867 IP (tos 0x10, ttl 64, id 0, offset 0, flags [DF], proto 17, length: 373) SIP_PROXY_IP.5060 > Asterisk_IP.5060: UDP, length 345 What i need to know please what TTL means specifically and what is the best value og TTL and what is the lengh vale mean

Hy, I would want to mark the packets that are entering in a machine, with a mark for using diffserv with DSMARK. My machine has 2 interfaces, a ethernet and a wireless. The ethernet interface is eth1 and the other is wifi0. Firs, I would want to test that I would be able to mark the tos of the paquets that I would be receiving, for this I write in the console of my linux: iptables -A

This is a new Centos 5.1 install on a HP nc2400 (that use to run XP). Completely clean install; blew away the XP partitions... After applying all the updates, and configuring for the rpmforge repo, I used yumex to install dkms and the dkms-ipw3945, ipw3945-firmware, and ipw3945d rpms. lsmod|grep ipw shows: ipw3945 180391 1 ieeee80211 33417 1 ipw3945 and dmesg)grep

hi friends, i am sending this to centos mailinglist as i didnt solved problem and guys from madwifi are probably dead, as they are not giving me any reply . Thanks D. ---------- Forwarded message ---------- From: David Hl??ik <david at hlacik.eu> Date: Wed, Mar 19, 2008 at 11:39 AM Subject: ath_pci in modprobe.conf on Centos/Fedora To: madwifi-users at lists.sourceforge.net Hi friends,

hi, On Tue, Mar 21, 2023 at 3:40?PM Michal Pr?vozn?k <mprivozn at redhat.com> wrote: > On 3/19/23 20:21, Natxo Asenjo wrote: > > hi, > > > > I have configured a routed network on my laptop with a ipv6 subnet and > > dnsmasq is handing out ipv6 addresses to my vms and it works really wel, > > but finding out which ips have been used is not as easy as with

we started using an ocfs file system about 4 months ago as the shared archived redo destination for the 4-node rac instances (HP dl380, msa1000, RH AS 2.1) . last night we are seeing some weird behavior, and my guess is the inode directory in the file system is getting corrupted. I've always had a bad feeling about OCFS not being very robust at handling constant file creation and deletion

Hello all, I might make a fool out of me, but I think the prio qdisc doesn''t work as advertised in any document I could lay my hands on. The following tests and observations were made with Linux kernel 2.6.20.21. This makes it up-to-date in the 2.6.20.x kernel family. My problem was that the link quality reported by the olsr.org olsrd degraded depending on the amount of payload

Hi, I have a IBM ThinkPat T30 a Cisco Aironet wireless internal in the laptop 802.11b only. It works great with open Acess points, but when i try to connect to encripted ones. I got the dialog box asking for the passphrase 128 bit, I enter it and after that i receive the dialog box again! Maybe my card do not support WEP or I am doing something wrong? Here is part of what i can see on

Hello, We have just migrated a server from sun solaris 8 to sun solaris 10. In the old machine we had a Samba 3.0.20b and in the new one, we have samba 3.0.21, both compiled like this with no problems: env LD_FLAGS="-L/usr/local/lib" ./configure --with-ldapsam --without-pam --with-quotas --with-ldap --with-included-popt --with-acl-support --with-libsmbclient We share user's

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 5675 bytes Desc: Clear Day Bkgrd.jpg Url : http://lists.linux-foundation.org/pipermail/bridge/attachments/20060515/b39aa4d5/attachment.jpeg

I have set up both Windows XP and Windows 2000 Server clients on Xen under Centos 5.1 and am unable to install an application firewall. I have tried the latest: 1) Agnitum Outpost Commercial Version 2) Comodo Firewall (ver 2 on Windows 2000) 3) Sunbelt Commercial Version With all of these when the firewall starts up it results in a BSOD. With Windows XP and Agnitum I can go back to a previous

Hi all, First, let me say I''ve been most impressed with how quickly and professionally people on this list ask and answer questions. Next, let me say that with which I need help is properly configuring strict PQ, and gathering certain stats. Specifically: - I need to create a priority queue with four queues (let''s say they are of high, medium, normal, and low priority) - I

Hello! I'm trying to make a wireless mesh network with b.a.t.m.a.n. protocol, and I would like to secure the wireless links with tinc. My test network is 2 wireless routers with OpenWRT Kamikaze firmware, and the network topology is the following: |CLIENT|eth0: 192.168.180| <--> |eth0: 192.168.1.1|MESH-NODE|ath0: 192.168.5.54| <~~> |ath0: 192.168.5.51|GW|eth1: 192.168.1.51|

Hi all, It's possible to create an alias of a device? Something like a device loN that all it's traffic is send to ethN, so ethN and loN are equivalent. It's for a bridged setup, i'm not trying to setup another IP on a device. Thanks! Jordi -- ...................................................................... __ / / Jordi Prats C E / S / C A

I''m trying to follow Chapter 10 of the howto and apply it to two ubuntu machines each with two 802.11b/g interfaces. However, I cannot get a connection. I would like the 4 interfaces to create 2 ad hoc links on separate channels. I have set this up successfully with the following: /etc/dbus-1/event.d/25NetworkManager stop wlanconfig ath0 destroy wlanconfig ath0 create wlandev wifi0

I have an IBM Thinkpad with this beastie in it. The card was immediately recognized and uses the airo driver. No matter what I do, I can't get it to successfully connect to my WAP. Sometimes it sees the access point (as evidenced by an iwlist wifi0 scan seeing the network) and sometimes I can actually get it to connect ( as evidenced by the iwlist command showing the WAP ID).

Update to iproute2 is available. Most of the changes were to repair the things that broke with the introduction of the batch mode to the ip command. http://developer.osdl.org/dev/iproute2/download/iproute2-2.6.14-051107.tar.gz For info on CVS ans other info see: http://linux-net.osdl.org/index.php/Iproute2 Masahide NAKAMURA * Updating for 2.6.14 - Show UPD{SA,POLICY} message