similar to: Can we use 2 tc filter rules with the same prio

Hi Paolo Malfatti, Thanks for your script. It works fine. I get what I expect. THANK you all the way until it comes to an end. FOR the benifit for evryone in the LIST. HERE IS the SCRIPT AGAIN. INTERFAZ_LAN=eth0 FULLBANDWIDTH=256 BANDWIDTH4LAN=64 tc qdisc del root dev $INTERFAZ_LAN tc qdisc add dev $INTERFAZ_LAN root handle 1 htb r2q 4 tc class add dev $INTERFAZ_LAN parent 1: classid 1:2

Hi, We have a 256 kbits/s (kilobits per second) link to the internet. it is a router running Linux that belongs to our ISP. They have given us 8 internet ips. (i.e- subnet is 255.255.255.248). one has been given to this router. I have given another internet ip to the firewall running CentOS 4.5. iptables is running on it. And also, I have installed iproute2 pkg as well. pls see below for

Hi, I have a CENTOS BOX as a firewall . both iptabes and iproute 2 are running on it. pls see bleow for installed RPMs. [root at firebox ~]# rpm -qa |grep iptables iptables-1.2.11-3.1.RHEL4 [root at firebox ~]# rpm -qa |grep iproute iproute-2.6.9-3.EL4.7 It has 3 ethernet cards. pls see below. eth0 - internet ip (pls asume. 1.2.3.4/29 ). it connects to ISP router. eth1 - 192.168.100.254

Hi all, I''ve got a BOX running CentOS 4.5. It acts as a firewall + router. I have installed both iptables and iproute2. I has 3 network cards. eth0 is connected to Internet (is has an internet ip. pls assume its ip is 1.2.3.4/29). it is a 256 Kbit link. eth1 is DMZ. its ip is 192.168.100.254 eth2 is LAN. Its ip is 192.168.101.254 I have alreday shaped traffic to 64 Kbit on eth1 for

Hi all, I have a 256kbit link where I have shaped 64kbit for downloading @ one ethernet. (eth1) I am using mrtg to monior it. it works fine. In addition to that, I am looking for some other pkgs. Are there good pkgs for that purpose? below is my script for dowmloading. I am looking for pkgs that suit below script. #traffic shaping on eth1 (Downloading) INTERFAZ_DMZ=eth1 FULLBANDWIDTH=256

HTB and imq was used to control traffic. AC="tc class add dev eth0 parent" $AC 1: classid 1:1 htb rate 100kbps burst 2k $AC 1:2 classid 1:10 htb rate 50kbps ceil 100kbps burst 2k prio 1 $AC 1:2 classid 1:11 htb rate 50kbps ceil 100kbps burst 2k prio 1 please tell me the range of "prio" _________________________________________________________ Do You Yahoo!? 新鲜到底,娱乐到家 -

Hi I''m doing traffic shaping with tc on ''10.0.0.0/30'' and ''10.0.0.28/30''. I want to delete part of shaping rules on the fly. (see my configuration at the end of this mail) I wan''t to delete the shaping for ''10.0.0.0/30'' on the fly while still keeping the shaping for part ''10.0.0.28/30'' running. When I for

Hey, I have such a script: tc qdisc add dev $DEV root handle 1:0 htb default 21 r2q 2 tc class add dev $DEV parent 1:0 classid 1:11 htb rate 100mbit tc class add dev $DEV parent 1:11 classid 1:21 htb rate 512kbit ceil 512kbit tc class add dev $DEV parent 1:11 classid 1:23 htb rate 1024kbit ceil 1024kbit tc class add dev $DEV parent 1:11 classid 1:25 htb rate 3072kbit

Hi, good people! I wanted to limit my 4 customers to 144, 16, 32, and 32kbps. I used the following tc commands BUT IT FAILED TO LIMIT each and everyone of them to its bandwidth. What am I doing wrong: My tc scripts are: tc qdisc add dev eth1 root handle 1: htb default 1 #Classes# tc class add dev eth1 parent 1: classid 1:1 htb rate 9bps ceil 9bps #Default

Hi, I''m work on traffic shaping and I would like to know if it''s possible to mix differents Queueing Disciplines ?? I would like to combine the proporties of a PRIO discipline with that of a CBQ discipline. I read some documentation and I found nothing about that, can you help me ? I think to try something like that : tc qdisc add dev $DEV root handle 1: cbq … tc class add dev

Here is what I am trying to do... I want to set it up so any traffic coming or going to a specific host is ran through 3 HTBs. Two of the HTBs are for limiting incoming and out going and I want them to then dump the traffic into the third for limiting overall bandwidth for that host. I have been using tc filter to put it into the HTBs for incoming and out going, but am having problems getting it

hello, a friend of mine have this configuration: 10 x PC -- router/linux/rh8 -- ADSL Modem -- ISP let''s say that the bandwidth is: 5M and 800K he does dc++ and counter-strike, so let''s say the UP is full, and the ping from the counter server is 300ms, the server cut the connection, and no more game, the player is unhappy. The normal ping is 50ms. so he thinks to put some

Dear Admins and Hackers, maybe i am to stupid to use ''tc''. But i having logical Problems to understand the Filter Rules in tc. Common Config: There is a Linux Engine (Debian) with a 2.6.11.11 Kernel which act as Packetshaper. Two Interfaces eth0 and eth1 are installed. Interface ''eth0'' is the Firewall Side Net 195.185.185.0/24. Interface

Hi, I have done this setup to give the machine 192.168.1.4 (masqueraded over dialup) the highest priority: #! /bin/bash WHAT="add" iptables -A PREROUTING -i eth0 -s 192.168.1.1 -t mangle -j MARK --set-mark 1 iptables -A PREROUTING -i eth0 -s 192.168.1.4 -t mangle -j MARK --set-mark 4 tc qdisc $WHAT dev ppp0 root handle 1: prio bands 3 priomap 0 1 2 tc qdisc $WHAT dev ppp0 parent 1:1

Hi, I am trying to setup a shaper for my linux box and I am experiencing some problems. What I am trying to do is priorizing packets on the egress link, therefore I have setup some prio classes etc. The priorizing seem to work but the problem is that the ceil parameter doesnt seem to work on non leafs. This is what stats show: > class htb 1:1 root rate 3000bit ceil 3000bit burst 1602b/8 mpu

HTB and imq was used to control traffic. AC="tc class add dev eth0 parent" $AC 1: classid 1:1 htb rate 100kbps burst 2k $AC 1:2 classid 1:10 htb rate 50kbps ceil 100kbps burst 2k prio 1 $AC 1:2 classid 1:11 htb rate 50kbps ceil 100kbps burst 2k prio 2 $AC 1:2 classid 1:12 htb rate 50kbps ceil 100kbps burst 2k please tell me if i do not set prio, what is the default prio? low delay class

Hi! Could somebody tell me, what is difference between these two prio parameters in http://lartc.org/lartc.html#AEN2241 1) tc class add dev $DEV parent 1:1 classid 1:10 htb rate ${UPLINK}kbit burst 6k prio 1 ^^^^^^ AND 2) tc filter add dev $DEV parent 1:0 protocol ip prio 10 u32 match ip tos 0x10 0xff flowid 1:10

Hi, all I''ve got problems with tc qdisc ingress. I''m using vanillia kernel 2.6.14.4 patched with http://www.ssi.bg/~ja/routes-2.6.14-12.diff, and iproute2-2.6.14-051107. i am using ingress to limit incoming traffic : (DEV is eth1 / DOWNLINK is 7700) # attach ingress policer: tc qdisc add dev $DEV handle ffff: ingress # filter *everything* to it (0.0.0.0/0), drop everything

Hi all, I''ve done a search through the archives but I can''t find a cause/solution to this. I''m running a FC4 box with the stock 2.6.12 kernel and a FC2 box with a stock 2.6.9 kernel. I''m obviously using iproute2 and the patched tc. When I clear down the qdiscs with "tc qdisc del dev <DEV> root" I get the following in response to "tc

Hi, Is there any tested good HTB script for traffic shaping available like as that of CBQ available at. http://freshmeat.net/projects/cbq.init I am n new bie and need to work on htb. -- Regards, M Arman _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc