similar to: tc not matching

Hi all, Can you tell me where is the documentation for the new IFB (implemented in kernels > 2.6.16). Thanks in advance! Nikolay

Hi, I have a server and ten clients in a Gigabit network. The server has 125mbps network bandwidth. I want that the server has 40Mbps bandwidth reserved for client 1 (IP 192.168.5.141), and the rest bandwidth is for all other clients. My script looks like this (I use IFB for incoming traffic): #!/bin/bash export TC="/sbin/tc" $TC qdisc add dev ifb0 root handle 1: htb default 30

With the below script, whenever I ping 10.0.16.10 (which matches the only filter I have), traffic still get''s sent to the default 1:2 class instead of 1:1 and I don''t know why... Any hints? (kernel 2.6.12, iproute2-2.6.15) tc qdisc del dev eth0 root > /dev/null 2>&1 tc qdisc add dev eth0 handle 1: root htb default 2 tc class add dev eth0 classid 1:1 parent 1: htb rate

I have to match my packets based on MAC address, which I cannot do in the POSTROUTING chain, so I do it in PREROUTING using MARK. Then, I match on the MARK in the POSTROUTING chain to do a CLASSIFY. But this does not seem to work: wireless-r1 bwlimit # iptables -L -v -n -t mangle Chain PREROUTING (policy ACCEPT 3353K packets, 941M bytes) pkts bytes target prot opt in out source

Hi, What exactly are the "tokens"? I thought each token allowed the sending of one byte, that tokens are stored in a bucket that can hold a max of "burst" tokens, and that this bucket is filled with tokens at "rate". But theory does not seem to explain the "tc -s .." output in the examples below. And I can''t figure out why or how... #tc qdisc

Hello. I have a linux server connected to a gigabit lan, and though that lan to a 768kbps/768kbps DSL modem. I''m trying to shape my webserver running on port 80/443 down to 512kbps, while leaving all other ports alone. The current configuration script that I''m using is as follows: tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1: htb default 99 tc class add dev

Hi all, I have been getting some strange results with HTB in kernel 2.6.11, and was wondering if anybody could give me some advice. Also, if someone could direct me to the changelog for the recent versions so I can see if it is worth upgrading? Anyway, the problem can best be summed up by looking at the output of ''tc -s -d class show dev eth0''. Some of the relevant results

Eric, I''ve attached the output from the command you requested below. I''m using kernel 2.6.17.12 and tc version ss060323. I''m have a nforce4 onboard giggabit controller using the forcedeth driver, if that makes a difference. Charlie, I''ll take a look at the Apache model for throttling, thanks. I was going for tc because was going to try to add additional

In this simple htb setup: # tc -s -d class ls dev eth0 class htb 1:1 root rate 300000bit ceil 300000bit burst 1749b/8 mpu 0b overhead 0b cburst 1749b/8 mpu 0b overhead 0b level 7 Sent 13171835 bytes 13169 pkt (dropped 0, overlimits 0 requeues 0) rate 45848bit 10pps backlog 0b 0p requeues 0 lended: 5272 borrowed: 0 giants: 0 tokens: -84429 ctokens: -84429 class htb 1:2 parent 1:1 prio 0

Hi, I''m using tc and HTB to shape my outgoing ADSL traffic. I was trying to make some graphs on the classes by meassuring the "sent bytes" of each class using rrdtool to store the data (as kbps after conversion). I expected that meassuring the root class I would get values similar that the ones I get measuring the interface counters but they differ by a large amount. Is

I am trying to get IPP2P working on my router. Thus far I can see connections being marked (see below), but they don''t seem to get saved or something. When looking at /proc/net/ip_conntrack, nothing has anything other than 0 for mark. The iptables commands for this are: iptables -t mangle -A PREROUTING -j CONNMARK --restore-mark iptables -t mangle -A PREROUTING -m mark ! --mark 0 -j

Running "tc -s class show dev eth1" against an HTB qdisc results in the output of class summaries similar to this: class htb 1:10 parent 1:1 leaf 10: prio 0 rate 150000bit ceil 1466Kbit burst 2Kb cburst 2Kb Sent 158641651 bytes 771351 pkt (dropped 0, overlimits 0 requeues 0) rate 8064bit 7pps backlog 0b 0p requeues 0 lended: 680985 borrowed: 90366 giants: 0 tokens: 173443 ctokens:

What''s going on here? I''m spewing UDP traffic at this thing, and it is exceeding the ceil. Anyone know how to fix this? class htb 1:613 parent 1:5 leaf 613: prio 6 quantum 2560 rate 20480bit ceil 103360bit burst 15Kb/8 mpu 0b overhead 0b cburst 1728b/8 mpu 0b overhead 0b level 0 Sent 16591370 bytes 4159 pkt (dropped 39449, overlimits 0 requeues 0) rate 412384bit 6pps backlog 0b

Hi to all of you!!! I am a Computer Science student trying to do the pre-grade thesis. I am trying to develop a free software tool to help administrators to control the traffic. Right now this tool is based on tc and iptables. I am having some problems trying to understand tc and tc examples: - Why in almost every list of tc rules based on htb class, there is a "tc qdisc dev ... root ...

Hi Here is something that worked with with 2.6.10-1.771_FC2smp and stopped working when I upgraded to 2.6.16-1.2069_FC4smp. These are fedora kernels and the network controller is an Intel Gbit (e1000) running a 100 Mbps Full Duplex. Don''t know how or if this matters but the 2.6.10 kernel has CONFIG_X86_HZ=1000 and the 2.6.16 has CONFIG_HZ=250 The idea is to just shape to , say 2Mbit, a

Hi, My home setup is as following: - 1024/128 kbit ADSL - FC3 I set up HTB to prioritize traffic. I am not very pleased with the obtained results. The scope of my setup is to have some ssh sessions with remote servers while browsing websites and running aMule Nothing complicated (I think... ;). The very high priority traffic (ssh), gets stuck when I start aMule and make an FTP download.

Hi, I''m trying to get HTB working correctly on Centos4 (RHEL-based) with kernel 2.6.9-34.EL. I have two gigabit network interfaces bridged together and I have created the following: tc qdisc add dev eth2 root handle 1: htb default 1 r2q 8000 tc class add dev eth2 parent 1: classid 1:1 htb rate 100Mbit burst 24k cburst 24k (I have been trying different parameters). The network is

i am trying to do some traffic classification using the PRIO qdisc and i am having a few problems. I have a root htb class: tc qdisc add dev imq0 root handle 1: htb default 255 r2q 1 tc class add dev imq0 parent 1: classid 1:1 htb rate 768kbit and a child PRIO tc class add dev imq0 parent 1:1 classid 1:99 htb rate 96kbit ceil 600kbit prio 0 tc qdisc add dev imq0 parent 1:99 prio tc filter

I have this: class htb 1:29 parent 1:1 prio 0 rate 3000bit ceil 100000bit burst 1599b cburst 1611b Sent 33233 bytes 772 pkts (dropped 0, overlimits 0) lended: 415 borrowed: 357 giants: 0 tokens: -3756376 ctokens: 128779 or this: class htb 1:21 parent 1:1 prio 0 rate 3000bit ceil 100000bit burst 1599b cburst 1611b Sent 57554 bytes 618 pkts (dropped 0, overlimits 0) lended: 193 borrowed: 425

Hi I have setup iproute2 and need a bit of help reading the stats from it ===== output qdisc htb 1: r2q 10 default 20 direct_packets_stat 0 ver 3.17 Sent 547326809 bytes 1342627 pkts (dropped 9303, overlimits 2817572 requeues 0) backlog 46p qdisc sfq 10: limit 128p quantum 1514b flows 128/1024 perturb 10sec Sent 41874343 bytes 730889 pkts (dropped 0, overlimits 0 requeues 0) qdisc sfq