similar to: Help about a QoS configuration

As seen on my post at: http://www.sveasoft.com/modules/phpBB2/viewtopic.php?p=28112#28112 This works very well... It does NOT work with stable 4.0! sveasoft will be issuing a bug fix for this (4.1) in the near future. Final Rev of working script w/ asterisk support I'm not going to run alchemy on production machines until it is stablish. Remember to set your uplink properly and to set

Hello, after spending several hours reading archives, I decided to write new post. I successfully set up packet classification, made some basic HTB setup, made some simple graphical representation from HTB statistics data... BUT, I cannot figure out how to refine HTB to get this behaviour: I need that class "p2p" should be the last one to get some link capacity. If I set both RATE

Hi I share my bandwith (adsl 512/128) between 12 users. I set up simple qos script for incoming (IMQ) and outgoing traffic using htb in root, 4 classess and esfq qdisc at leafs. Interactive traffic goeas to class1 , http,mail etc. to class2, p2p, ftp to class3, and rest to class4. Classess divide link in proportion 20% (prio 1), 40% (prio 2), 20% (prio 3) ,20% (prio 4) This works

Hello, its me again, I won''t stop sending emails to this list, until I solve this problem, I''ve tried several apps to create the right htb rules (even made them my self), but I always get the same results, traffic gets shaped, but I can''t use my bandwidth, and this is weird, because I should be able to, also I keep seeing download being limited too, and that

Hello list. I''ve configured a very simple script to slow down packets coming from a particular IP Address. I''ve used IPTABLES to mark traffic coming from this IP Address, but it does not appear to be working as expected. Let me first describe my system as maybe what I''m doing is beyond what NETFILTER can do. I have one machine that runs all my servers as

Hi, I appologise for the bad ettiquite of this, but I have tried looking for some HTB examples that would help me, and am having trouble understanding how the tc filters should work, but I can''t figure out why this isn''t working. I''ve written this script, based upon the ultimate traffic shaper at LARTC, to try and shape for me and my 3 housemates. The idea being to

Hello, there''s a problem I''ve had for several months now, and I''ve never been able to find an answer to it. I''ll try to explain as quick as possible: I have a server that controlls my home network, it provides internet to them also (NAT) and I would like to provide QoS by shaping traffic. I have a p2p server here (running mldonkey), since only that

Hello, Could somebody explain following issue ? I set up htb class on outgoing external interface to shape p2p upload traffic. I limited it to 4Mbit/s. I also set up iptables counters chains in FORWARD chain to calculate traffic generated by p2p and others. While tc stats show that p2p shaping class keep defined 4Mbit traffic, iptables counters show me that p2p traffic exceed traffic to 150%

Hi guys, I want to priorize traffic comming down from internet on my ppp0 int I want port 80 and 21 (and others ) to have preference over P2P traffic, I don''t want to bann P2P just give to it less prio than other more vital services... does anyone know how to do it or where to read on. Thanks in advance

Hello there, I''m having lots of problems with my setup here. Let me explain: I am network administrator for my university dorm. We are about 300 users, and we have 2 ADSL connections doing load balancing with 300kbits upstream and 2Mbit downstream. The load balancing is working great, we are doing connection tracking so I can mark and hence prioritize interactive traffic and ACKS

Hi, I found that I had some thinking error with the wshaper script. I assigned the bandwith of my DSL connection to it, but the machine where it runs is normally connected to the LAN with 100Mbit behind a separate Hardware-Router.Obviously, the complete connection of the machine was slowed down to 384k because I told it so.I guess, since wshaper takes only one card as argument, I can''t

Hi list! I have a LAN server with Gentoo Linux. It''s a Pentium III at 1000 MHz with 256 MB SDRAM. I''ve implemented a QoS solution with HTB and SFQ. Here is the diagram: _______________________________________________________________________ 1:--+----1:1 - [ counter-strike & icmp ] rate=1Mbit; ceil=1Mbit; | prio 0; (u32 filter

I thought I had this all worked out, but it seems not. The following tc configuration: tc qdisc del dev ppp0 root 2> /dev/null > /dev/null tc qdisc add dev ppp0 root handle 1: tbf rate 120kbit burst 1200 limit 1 tc qdisc add dev ppp0 parent 1:1 handle 2: prio bands 3 tc qdisc add dev ppp0 parent 2:1 handle 10: sfq perturb 20 tc qdisc add dev ppp0 parent 2:2 handle 20: sfq perturb 20 tc

Hi, I''m new at traffic control and was reading up on HTB and using it to put an upper limit on traffic. I have a 256k DSL with 64k upload (which translates to about 5/6KB uploads). The machine running the P2P applications keeps filling up the 64K so my browsing from other machines in the network ends up being very slow. Since there are several P2P applications, I wanted to set the

Hi all I''m new in this list and i hope to lear and to help if possible. But firt i need help :-( I have this messege in my syslog when my classes and qdiscs goes down. Can any one know what does it mean? Thnx in advance. Yannick Arrimadas Bot Oct 14 16:09:27 pototogorri kernel: HTB init, kernel part version 3.17 Oct 14 16:09:27 pototogorri kernel: Unable to handle kernel paging

Dear list: I have a problem I cannot handle yet, and need to solve it as soon as possible. Would be very greatful with anybody who can help me. I have a 512/512 link to internet, that I want to share between several computers. I have eth0, with a public IP address, conected to Internet, and also, eth1, with a private IP address, for network with the surfing computers. I have a main class with

Hi all, I am running Slackware 10.1 with Kernel 2.6.14.3 includes iptables 1.3.4 with layer 7 My network diagram below: - INTERNET --- LINUX_ROUTER_FW --- PCs Below is my simple iptables script: - echo 1 > /proc/sys/net/ipv4/ip_forward iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE iptables -t mangle -A POSTROUTING -m layer7 --l7proto applejuice -j MARK --set-mark 1 iptables -t

Hello, I''ve been trying to shape the bittorrent traffic (on my external interface, upload), but without luck, for this I''m using layer7 filter right now, but I''ve also tried ipp2p, with the same results, I might say that this is not a problem with this packet classifiers, the problem is with HTB, here''s why. When I open azureus (the bittorrent client I

Hi,All I am using iproute2 to manage bandwith for ADSL router.High,medium,low priority are needed for different protocol port on the ADSL's upstream side,as following: LAN --- |ADSL Router|------WAN When there aren't traffic on the specific priority, its bandwidth should be borrowed by other priorities.But it doesn't work.Here is my script: /usr/sbin/tc qdisc del dev nas0 root

Hi all, I''m experimenting with HTB and the prio parameter and it does not give me results I expect. I''ve created 4 HTB classes: 1:10 TCP ACKs (prio 0) 1:20 TCP traffic on dst port 10001 (prio 1) 1:30 TCP traffic on dst port 10000 (prio 2) 1:40 Default (prio 3) ceil and rate parameters are the same for all 4 classes (rate is