similar to: Routing help

Hello Lartc Mailing List: Been working on something the last week and a half and ALMOST have it working.., just need a few pointers from the wizards on this mailing list to nail it. Ok, my setup is a hub and spoke arrangement, hub is Cisco 2821 with IOS 12.4. Spokes are ruggencom RX1000 routers, Debian based with the following versions installed: rx1000test:~# uname -a Linux rx1000test

Hi all, I read the setup at http://www.blackh0le.net/articles/vpn-dun-howto.html to setup my VPN. However, I'm having a problem which I think is proxy-ARP not working. I like to ask you to see if you know what's going on. When I ping 10.77.1.1 from windows XP machine the packets get to the 10.77.1.1 machine, but they don't have a return path to get back. When I do ping the windows

Hi, I have been searching around and trying for a few days but still can''t get it works. Hopefully the highhand here can give me hints!! I have 3 adsl connections, 1 is using hardware broadband router to connect and the other 2 are using my debian linux pc to connect. I hope to setup a route policy so that all users except user1 and user2 will use the broadband router connect (eth0),

Hello I have /25 addressed on a box (virtual devices on eth0) and I want to tunnel some of these addresses to my home network. One address to my gateway (a.b.c.d, external IP) and one address to my internal network (192.168.0.0/24-style). I will use the tunnels for irc, smtp and surfing. What protocol and which technique is easiest and best to use? One more thing. I don''t want to set up

Hi, I posted this question yesterday on the Openvpn mailing list, with no response, figured I will ask here too. I have been using openvpn for quite a while, no major problems encountered. Now I need to allow the server to access the lan of the client, and I can not figure out the routing. This is what I have after the tunnel is brought up: SERVER (A.A.A.A) Arx:~# ip addr ... 3: eth1:

Hello Samba folks, I thought you might be able to help me. I have 2 machines, 1 is FreeBSD, 1 is win95. They can't ping each other, but the bsd box comes up in Network Nieghborhood when Samba is active. What's going on? Is it not possible to ping a windows machine from a unix box? They are on the same hub via UTP. IPs are 192.168.1.x and netmasks are same (255.255.255.0).

I cannot connect to the INTERNET via my stand alone computer or my wireless laptop with the /etc/shorewall/interface setting I have. What Interface setting will allow me to connect to the Internet? Please see attached document for more details. ------------------------------------------------------------------------------ Free Software Download: Index, Search & Analyze Logs and other IT

Hello all, Yesterday I noticed that my system was "leaking" traffic towards the 10/8 network, I have shorewall installed on multiple machines ranging from single interface devices to ones with 10+ interfaces. I tested all the boxes and they are showing the same behavior. All systems are CentOS 3.4, 2.4.21-27.0.2.ELsmp. Shorewall version: 2.2.1 For the host mentioned is a single

I''ve got shorewall installed on Mandrake 9.0 As I boot my computer ( single workstation ) I do not get any connection to the net before doing; shorewall stop, shorewall clear, shorewall restart. Only after giving those three instructions everything is normal. Is there an easy way fixing this ? Or else how can I prevent shorewall starting-up at boot, in order to start it manualy once the

Hi... I have 2 ADSL lines (ppp0 and ppp1) on the same machine, and at first moment, I just want to make them both ping correctly from the internet. I already setup 2 links on the same machine, following the item 4.2.1 (split access) of the LARTC-HOWTO. I guess it was one dial-up link and one ADSL. But now, I have two ADSL lines, both from the same provider, and both lines use the same P-t-P

Hey, I''ve been scouring the web these past few days trying to find a suitable technique to load balance my network. Unfortunately I think my setup is very uncommon, so I''m looking to you guys to see if you can help. I currently have 2 ADSL modems, provided by the same ISP and terminating on the same gateway (I think having the same gateway is what is causing the problems, since

I have a setup with two Internet providers. One circuit (net0 == eth1) is used primarily for employees and tunnels to other sites. The other (net1 == eth2) is for the production machines that customers access. Everythung works in teh sense that packets get to where they are sent (mostly) but I recently I had a sniffer on the system and noticed a problem I cannot solve. traffic coming in

Hi, I have been a shorewall user for a long time now, and it has been working flawlessly. I have now changed ISP and my new DSL connection is PPPoE. My setup is as follows: internet <--------> 3com812 Officeconnect (bridge mode) <----> eth0 <-------> linux box <----> eth1, eth2, eth3, eth4 <---> other internal networks Things are working fine, but the link is

My telco is moving to feeding me over fiber, breaking out with a media converter to one Ethernet interface. At present, I am retaining the static feed over copper on eth0, and taking the two new feeds via vlans on eth1. I have configured the static IP feed on eth1:790 as vlan 790, and that seems to be fine, and eth1:780 as the PPPOE feed, and brought up PPPOE to give me an IP, that is

Having a problem with the 3 interface setup. I can get DMZ hosts, and FW to see internet, but anything on LOC interface is unable to get out. My first post to the list didn''t have the information needed, sorry for that, but thank you for pointing me to more resources. I''ve looked at the problem myself some more, but am still stuck. Shorewall Version: 2.2.1 ip addr show 1:

Hi Here is a short description of my network: ppp0 (adsl) ppp1 (adsl) | | | | --------------------- | Router | | Firewall | | MASQUERAD | | DNAT | | | | eth0 | --------------------- | | | ---------------------- |

What I''m doing: I have Shorewall on a SuSE 9.0 machine, which is the firewall/router on the network. External interface is eth0 172.16.1.1, internal interface is eth1 10.40.1.1. (I used the Two-interface Linux System Quickstart Guide). All works well with that configuration. I also use PPPD for dial-in clients, and have two modems for incoming calls. Recently I added VPN interface

Hello Tom, I''ve been using Shorewall for years without problems. My previous version of shorewall was 1.4.6b-1. Everything worked just fine. Today I upgraded using rpm to 2.0.8-1. After update no one can connect to any interface from net. Server can connect to outside world fine and those described in routestopped have no problem connecting. Any help correcting this problem would be

Hi There, We currently using iproute2 for load balancing. However we need more upload speed as we load balance over 3 dsl lines. I''ve been looking for a way to combine the upload speed to more faster. Found a site called www.upstreaminter.net where these guys bond the adsl channels to improve uploads, Since downloading is problem as its need to know the ip address of the downloader they

Hello Shorewall list, I''m a happy Shorewall user since a few years now and everything works fine for me except one thing that I try to implement since a week, the multi-isp. I''ve downloaded the 2.4.0 Stable release yesterday and tried the RC2 since a week. My config is a Debian running a kernel 2.4.27 home made with the CONNMARK.diff patch applied I''m using 2 ISP,