similar to: doubt about esfq

On 2/19/07, Salatiel Filho <salatiel.filho@gmail.com> wrote: > Well , thanks to imq all my client machines are now shaped and > everything is great ... > But now i have a doubt , is there a way to shape the traffic that goes > to the route [doing a wget from the router for example ]? > > > I have a PREROUTING IMQ0 and a POSTROUTING IMQ1 , everything is > working like

Hi guys, i have a little doubt ; I have eth0 ethernet and eth1 wireless , and they are bridged in br0 Is there any difference in the behavior between do tc qdisc add dev br0 root sfq OR tc qdisc add dev eth0 root sfq && tc qdisc add dev eth1 root sfq -- []''s Salatiel "O maior prazer do inteligente é bancar o idiota diante de um idiota que banca o

After starting to shape local traffic now i am getting a lot of kernel panics in tcp_retransmit, so i decided to update my kernel from 2.6.17.14 to 2.6.21.1 , the problem is that after that i get: # iptables -t mangle -A POSTROUTING -o eth0 -j IMQ --todev 0 iptables: No chain/target/match by that name so i can not redirect ttraffic to IMQ device. and modules are loaded. - # lsmod Module

Hi guys , i am starting to "play" with qos in linux. Well , i am trying to setup an ingress filter but i do not know why it is not working. tc add qdisc dev eth0 ingress tc filter add dev eth0 parent ffff: protocol ip prio 1 handle 1 fw police rate 160kbit burst 256kbit drop flowid :1 After that : iptables -A PREROUTING -t mangle --sport 80 -j MARK --set-mark 1 So , i think this

Hi, i am trying to migrate my print servers from windows to linux , everything is getting really nice but i still face a few problems , and since i don't know if i need help from cups or samba guys i will post to both lists, so maybe someone can give me some help. Well, i have now cups and samba working just fine, i can authenticate my users in cups from Active Directory using winbind and

i am trying to do some traffic classification using the PRIO qdisc and i am having a few problems. I have a root htb class: tc qdisc add dev imq0 root handle 1: htb default 255 r2q 1 tc class add dev imq0 parent 1: classid 1:1 htb rate 768kbit and a child PRIO tc class add dev imq0 parent 1:1 classid 1:99 htb rate 96kbit ceil 600kbit prio 0 tc qdisc add dev imq0 parent 1:99 prio tc filter

Hi , i am trying to understand how RED queue discipline works but i am having a few troubles. The parameters are MIN , MAX , LIMIT , BURST I put LIMIT = 64Kb, so if i am not wrong it should PDROP anything over this value , right ? i put MIN = 8Kb , so no drops at all below this value, right ? i put MAX = 16Kb, starts to early drop anything above this using probability P. I put probability at

How can i redirect all traffic that not come from port 80 to a flow ? i was thing about some like tc filter add dev imq1 parent 1: protocol ip prio 7 u32 match ip sport !80 ...... But this not work. Another doubt, if i have two rules that intersects , for example , one filter with u32 match ip src 10.10.10.10 flowid 1:10 and other with u32 match sport 80 0xffff flowid 1:11 , which one will

Ok , let`s go again with shaping a bridge interface. The environment is a dd-wrt firmware router. I have vlan1 interface connected to the DSL modem , and a br0 interface connecting wired and wireless machines. lets begin with the doubts , I have [example]: tc qdisc add dev br0 root handle 1: htb default 999 tc class add dev br0 parent 1: classid 1:999 htb rate 16kbit ceil 16kbit well , all

Could anyone explain what is WRR param2 [wmode2 , incr2 , decr2 , min2] for ? can i set just the param1 ? [wmode1 , incr1 , decr1,min1] -- []''s Salatiel "O maior prazer do inteligente é bancar o idiota diante de um idiota que banca o inteligente".

Attaching WRR to a hfsc ot htb class after a while i will get all packets drop and syslog full of HFSC or HTB : Non-work-conserving qdisc any ideas ? -- []''s Salatiel "O maior prazer do inteligente é bancar o idiota diante de um idiota que banca o inteligente".

Hi , i am trying to add a driver to windows using the smbclient and rpc commands [got those from cupsaddsmb -v commands] and i am getting : smbclient //localhost/print$ -U $PASS -N -c ' mkdir W32X86;put GENERIC.ppd W32X86/GENERIC.ppd;put /usr/share/cups/drivers/ps5ui.dll W32X86/ps5ui.dll;put /usr/share/cups/drivers/pscript.hlp W32X86/pscript.hlp;put /usr/share/cups/drivers/pscript.ntf

Hello! I am using since yesterday ESFQ instead of N HTB queues. It mostly works OK, but when somebody is using one single sesion (for example downloading file via FTP), it gets weird speed. For example it is 20 kilobytes pres second, then drops down to 9, then 20 again, and then slowly to 0 and stops. But when using download accelererator of some kind or bittorrent client which uses many

Hi again, I was just looking around for ESFQ sources, and I see that the main site is down, and only has kernel 2.6.4 patches. Is ESFQ maintained? If so, where can I find patches for 2.6.10? Thanks, -justin _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hello, there''s a problem I''ve had for several months now, and I''ve never been able to find an answer to it. I''ll try to explain as quick as possible: I have a server that controlls my home network, it provides internet to them also (NAT) and I would like to provide QoS by shaping traffic. I have a p2p server here (running mldonkey), since only that

Hi! Some time ago I faced a problem in limiting traffic on host with multiple uplinks. Since all the stuff worked nice seemed that there will be no problems. But then I realized that P2P users are smart enough to bypass limits as sfq doesn''t give fair sharing in this case (thousands of connections from one user versus few from the other). I tried IMQ but it''s instability in my

Hi If I have a HTB class with 128kbit, and I want to put "N" users in that class ( in order to share bandwidth fairly ) , which is better for me ? esfq (hash dst) or wrr ? I would attach esfq or wrr to HTB parent class. Also I''ve readed on Jim script that over WRR put a RED qdisc, but I don''t understand it. bests andres

Hi there, i am trying to shape a network for a college dorms... INTERNET---- ETH0--------Nat Box-------ETH1--------LAN I have set up classes of traffic (HTTP, FTP, MAIL, IM, OTHER) and i have assigned a rate for everyone with a HTB qdisc. The limit based in traffic is working flawlessly. However, under every HTB class i have set up a ESFQ queue discipline with hash value set to

Hi, We currently have ESFQ running on an old Fedora machine and i'm trying to build a new router with something similar using CentOS 5.5 The problem is that it seems by default the CentOS is not compiled with TC ESFQ or TC filter hash flows I get the following error: Unknown filter "flow", hence option "hash" is unparsable How can i add support for the hash flow