similar to: tc doesn''t shape correct

Hi ; MY script: tc-htb3 qdisc del dev eth2 root ipchains -F tc-htb3 qdisc add dev eth2 root handle 10: htb default 20 r2q 40 tc-htb3 class add dev eth2 parent 10: classid 10:1 htb rate 50Mbit burst 2000 tc-htb3 class add dev eth2 parent 10:1 classid 10:100 htb rate 12mbit ceil 50mbit prio 1 tc-htb3 class add dev eth2 parent 10:1 classid 10:20 htb rate 38mbit ceil 50Mbit prio 8 ipchains

Hi, I''m trying to perform some (what I consider) basic traffic shaping on our network utilising HTB. I have mostly reused the example on the lartc.org site: tc qdisc add dev eth0 root handle 1: htb default 10 tc class add dev eth0 parent 1: classid 1:1 htb rate 100mbit burst 24k tc class add dev eth0 parent 1:1 classid 1:10 htb rate 50mbit ceil 80mbit burst 19k tc class add dev eth0

Hi! Is it HTB fully compatible with BOND interface? I have this setup (mode= fault tolerance) : BOND0 -> ETH0 + ETH1 BOND1 -> ETH2 + ETH3 ( http://www.kernel.org/pub/linux/kernel/people/marcelo/linux-2.4/Documentation/networking/bonding.txt ) HTB work very well with Class over BOND0. If I add Class for BOND1 it generate balance errors. Also with HTB.init

Hello! I need to switch from htb2 to htb3, because of speed issues (for me, htb2 is unable to handle more then 100mbit duplex with ~550 classes), kernel profiling shows htb_dequeue_prio at 1st place with 3x isolation. So, I''ve moved from 2.4.19 to 2.4.25 kernel (hi-pac for classification/marking and htb3 for queueing), and traffic rate drop from 100 to 20mbit. What can be wrong? The

i got this problem, i want to shape my clients internet bw, but i don''t want to shape my local network traffic. For information, my clients using wireless to connect to my router[192.168.1.254]. when the clients request data from internet, example download from www.download.com, i want to shape his bandwidth, but when the clients [192.168.1.1] want to download from my file server example

Hi Guys, I have a little problem i dont understand why its happening, Initially i thought it was a network problem, but then i made a crossover between me and the server and shaped on that interface with as minimal as possible config this my test: $TC qdisc add dev $INTERFACE root handle 1: htb default 30 $TC class add dev $INTERFACE parent 1: classid 1:1 htb rate 10Mbit # POOL1 $TC class add

Hi All, I am using the script below to limit download rates and manage traffic for a certain IP address and testing the results using iperf. The rate that iperf reports is much higher than the rate I have configured for the HTB qdisc. It''s probably just some newbie trap that''s messing things up but I''m buggered if I can see it. The following script is run on the

Dear list, I have the problem that child classes don''t seem to issue the parent class to borrow from their parent. This is a simplified version of my script: tc qdisc del dev $DEV root tc qdisc add dev $DEV root handle 1: htb default 10 tc class add dev $DEV parent 1: classid 1:1 htb rate 10mbit tc class add dev $DEV parent 1:1 classid 1:10 htb rate 1kbit ceil 512kbit #groups tc

Hello i''m having some issues trying to match packets using iptables mark, iproute filter and tc filter.- i mean, when i do iptables -t mangle -A INPUT -p tcp --dport 80 -j MARK --set-mark 20 iptables -t mangle -A PREROUTING -p tcp --dport 25 -j MARK --set-mark 10 iptables -t mangle -A FORWARD -p tcp -i eth0 -o eth1 --dport 25 -j MARK --set-mark 10 $TC qdisc del dev $INET_IFACE root $TC

Hello, I have the following proplem. My DiffServ configuration is working fine when I do ping, but when I use mgen the packets are not detected at the core router. Here is my core router configuration: #!/bin/bash tc qdisc add dev eth1 handle 1:0 root dsmark indices 64 set_tc_index tc filter add dev eth1 parent 1:0 protocol ip prio 1 tcindex mask 0xfc shift 2 tc qdisc add dev eth1 parent

Hi: I am using a machine with the 2.4.26 kernel, and trying to compare the performance of the HTB qdisc with the HFSC one. I have the following simple script that allows me to have a video stream on port 1234 while it limits a ttcp UDP stream so that the video stream is unimpaired. #!/bin/bash tc qdisc add dev eth0 root handle 1: htb default 12 tc class add dev eth0 parent 1: classid 1:1

I''m trying to shape each machine on an interface to 256k each, but I''m getting stuck and only able to shape an entire interface to 256k. What should I be doing differently here? tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1: htb default 10 tc class add dev eth0 parent 1: classid 1:1 htb rate 100MBit ceil 100MBit tc qdisc add dev eth0 parent 1:10 handle 110:

Hello all, I am with a doubt about QoS solution... I have a 4 Mbit backbone coming from the telco I use... This is the link I serve to my clients, so I make this classes: $TC qdisc add dev $DL root handle 1: htb default 60 CLASS="/sbin/tc class add dev $DL parent" $CLASS 1: classid 1:1 htb rate 4096Kbit $CLASS 1:1 classid 1:10 htb rate 256Kbit ceil 3072Kbit burst 15k $CLASS 1:1

Hello all, this is my first post here. Sorry for my english. Gentoo LAN router, 2.4.26-hardened-r2 There are 2 WAN links, one LAN link. I am doing some iptables/routing/tc magic in my scripts. What''s interesting is marking packets traveling from all IP''s in LAN. Interesting commands are: ------------- for ip in `seq 50`; do $IPTABLES -t mangle -A FORWARD -o eth2 -d

Hi, Can anyone point me out where the script below is wrong? All I want is that host 172.31.1.1 can only use 10 megabit. If I run this script on the in-between router nothing happens (the host uses still the full 100 mbit, tested with iperf) , so i assume that something must be wrong.... #!/bin/sh # LAN1 NIC tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1: htb tc class add dev

Hello. I have a linux server connected to a gigabit lan, and though that lan to a 768kbps/768kbps DSL modem. I''m trying to shape my webserver running on port 80/443 down to 512kbps, while leaving all other ports alone. The current configuration script that I''m using is as follows: tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1: htb default 99 tc class add dev

I''m trying to implement something similar the the diagram in section 9.5.2.1 in the LARTC HOWTO, but must have missed something somewhere :( I''m trying to hack up wondershaper, as it looked like a good place to start.. Here''s where I currently at, but I''ve tried alot of different things, all failing, some worse than others. The end result is to throttle back 126

Hi All, When reading some files we get this error: md5sum: /path/to/file.xml: Structure needs cleaning in /var/log/glusterfs/mnt-sharedfs.log we see these errors: [2013-12-10 08:07:32.256910] W [client-rpc-fops.c:526:client3_3_stat_cbk] 1-testvolume-client-0: remote operation failed: No such file or directory [2013-12-10 08:07:32.257436] W [client-rpc-fops.c:526:client3_3_stat_cbk]

Hi, i´ve read about this problem but i didn´t find any solution. I have a router with nat like that: internet - eth0 - Router - eth1 - Lan I made a htb script for shaping outgoing in eth0 and it works great. The problem begin with the incoming traffic... Like other people said, when somebody in the lan uses the tipical download accelerator, the line is out because the bandwidth is divided by

Hi to all of you!!! I am a Computer Science student trying to do the pre-grade thesis. I am trying to develop a free software tool to help administrators to control the traffic. Right now this tool is based on tc and iptables. I am having some problems trying to understand tc and tc examples: - Why in almost every list of tc rules based on htb class, there is a "tc qdisc dev ... root ...