similar to: howto install dscp

Beta 2 is now available for testing. Problems Corrected since Beta 1: 1) References to the obsolete USE_ACTIONS option have been removed from the manpages. 2) NFLOG has been documented for some time as a valid ACTION in the rules files but support for that action was never implemented until this release. 3) The Checksum Target capability detection in the rules compiler was

Beta 2 is now available for testing. Problems Corrected since Beta 1: 1) References to the obsolete USE_ACTIONS option have been removed from the manpages. 2) NFLOG has been documented for some time as a valid ACTION in the rules files but support for that action was never implemented until this release. 3) The Checksum Target capability detection in the rules compiler was

Hello, I have a problem with simple traffic shapping in shorewall, my current configuration is: zones vlan10 ipv4 # interfaces vlan10 vlan10 detect tcpflags,routeback shorewall.conf TC_ENABLED=Simple tcinterfaces vlan10 Internal 1mbit:50kb shorewall show tc Device vlan10: qdisc prio 5: root refcnt 2 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1

Hi, Can anybody tell me how to delete DSCP or TOS setting using iptable command. iptables --list OUTPUT --table mangle Chain OUTPUT (policy ACCEPT) target prot opt source destination DSCP tcp -- anywhere anywhere tcp spt:http DSCP s et 0x08 DSCP udp --

Can anyone comment on the DSCP quality of service settings on your Asterisk server? The network we're setting up has data on the default VLAN, Asterisk server and phones on VLAN 4, and we're using Polycom phones with a PC hooked up to the phone's pass-thru port. What iptables settings are you using on the Asterisk server for DSCP? What are your Polycom DSCP settings? We're using

Hello everybody, I have tried several iptables versions (from 1.2.4 to 1.2.6a) to mark outgoing packets (change the DSCP field) with no success. #iptables -A OUTPUT -t mangle -d 10.0.0.3 -j DSCP --set-dscp 0x2 iptables v1.2.6a: unknown arg ''--set-dscp'' TOS target is working fine, but I want to create different codes for EF and AF classes in a diffserv

Dear all can anyone tell me how to mark packet''s DSCP value using tc? Thanks. Regards, philip -- Hong Kong IP Multicast Initiative (HKIPMI) Department of Information Engineering The Chinese University of Hong Kong Phone : 2603 5240 Fax : 2603 5032 _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl

Has anyone figured this out yet? Lots of places say to add the following to sip.conf of an Asterisk 1.2 system (current production machine/Asterisk as root): tos=0xB8 (Hex B8 = Decimal 184 = Binary 10111000) or if you are running Asterisk v1.4 or newer: tos_sip=cs3 ; Sets TOS for SIP packets. tos_audio=ef ; Sets TOS for RTP audio packets. tos_video=af41 ;

Hi, DSCP match in /tcrules/ doesn''t work with CS6 and CS7, it provides an error "invalid value" for string and hexa values. It seems that it comes from /Chain.pm/, in the function /do_dscp/: fatal_error( "Invalid DSCP ($dscp)" ) unless defined $value && $value < 0x2f && ! ( $value & 1 ); I dont understand why "$value < 0x2f", but

I''m successfully using HTB + GRED to shape traffic based on the DSCP field. I would like to strip the DSCP and possibly replace it with normal ToS bits on egress traffic leaving my network. Leaving DSCP set is pointless, and could potentially cause problems with some ISPs that use DSCP internally I suppose. Setting ToS bits would seem ideal as most networks still honor it to varying

I am assuming that the TOS values directly map to DSCP values in the ip header. Is this a correct assumption? If so, can someone tell me the correct setting to set call control packets with a DSCP of AF31(011010) and media with EF(101110)? So would the setting for AF be TOS=46?? Is it possible to mark the media and call control separately?? -------------- next part -------------- An HTML

Did anyone ever answer this one? THIS is what I am trying to do: >[LARTC] cbq+sfq and DSCP marking >Maria Joana Urbano stmaria@dei.uc.pt >Thu, 13 Feb 2003 19:29:42 +0000 > > * Previous message: [LARTC] Monitoring.... > * Next message: [LARTC] two routes 1 network card > * Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] >

Is it possible to set QOS/COS/DSCP on IAX packets? I see some parameters in sip.conf but not iax.conf Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091001/abf55045/attachment.htm

https://bugzilla.mindrot.org/show_bug.cgi?id=1964 Bug #: 1964 Summary: QoS/DSCP names false translated to ToS hex value Classification: Unclassified Product: Portable OpenSSH Version: 5.9p1 Platform: amd64 OS/Version: Linux Status: NEW Severity: normal Priority: P2 Component: ssh

https://bugzilla.mindrot.org/show_bug.cgi?id=1733 Summary: Enhance support for QoS (ToS) by supporting DSCP/CS and adding option Product: Portable OpenSSH Version: 5.4p1 Platform: All OS/Version: Linux Status: NEW Severity: enhancement Priority: P2 Component: ssh AssignedTo:

I can use DSMARK to mark on the Egress side. Is there a way to mark/change the DSCP value of an incoming packet on the ingress side? Thanks. Jon Flechsenhaar Boeing WNW Team Network Services (714)-762-1231 202-E7

Hi, I want to setup core routers to do both DSCP marking and to get the DSCP and forward packets based on DS field. I don''t want to separate DSCP marking to be done only at the edge routers. I know that dsmark is both used for DSCP marking and for getting the DSCP and forwarding packets according to DSCPs. In my case, since I want to do both of these I need two dsmarks.(?) I am not

I have long included tinc in the cerowrt project as a lighter weight, meshy alternative to conventional vpns. I sat down a few days ago to think about how to make vpn connections work better through fq_codel, and decided I should maybe hack on a vpn to do the job. So I picked up tinc's source code for the first time, got it working on IPv6 as a switch in a matter of minutes between two

I don't understand this message: [2009-10-29 16:31:51] WARNING[28510]: rtp.c:1997 ast_rtp_settos: Unable to set TOS to 184

Real networks use either PREC (as it maps 1:1 to 802.1p and MPLS TC) or DSCP. Interactive SSH uses PREC 0x0, which is just best-effort and DSCP 0x4 which has no standard meaning (found network where DSCP 0x4 was dropped, completely, as it didn't hit any defined/allowed QoS class, obviously misconfig, BE class should eat anything not already defined) Should interactive use TOS value which has