similar to: Problems with dhcp

Hi everybody. I''m trying to configure shorewall folowing this manual: http://www.montanalinux.org/proxmox-ve-with-shorewall.html But with shorewall check it tells me thah: Checking /etc/shorewall/interfaces... ERROR: Unknown zone (dmz) : /etc/shorewall/interfaces (line 16) How can I define it in the zone file? thanks for the help. best regards, Santiago.

Our setup: server running shorewal 4.5.2.2 and watchguard vpn appliance. VPN appliance was supplied by our document flow provider. I want to route traffic to 192.168.2.0/24 via 10.10.10.1 gateway. So I thought it would be a good idea to set it up as another ISP in the providers file. But when I enable it I can reach 192.168.2.0/24 subnet but not internet. Can you please tell what I am doing

RC 2 is ready for testing. Problems corrected: 1) The 4.5.1 Shorewall Lite and Shorewall6 Lite installers install the wrong SysV init script on Debian and derivatives. That has been corrected. 2) The getparams program now reads the installed shorewallrc file rather than ~/.shorewallrc. 3) The ''load'' and ''reload'' now copy the

RC 2 is ready for testing. Problems corrected: 1) The 4.5.1 Shorewall Lite and Shorewall6 Lite installers install the wrong SysV init script on Debian and derivatives. That has been corrected. 2) The getparams program now reads the installed shorewallrc file rather than ~/.shorewallrc. 3) The ''load'' and ''reload'' now copy the

Hi List, I have a new install of CentOS 6.2 and shorewall 4.5.1-2. I usually have no issues with shorewall until now. When I execute < #shorewall start > I get the following error. root@poweredge > /etc/shorewall# shorewall start Compiling... Can''t locate Shorewall/Compiler.pm in @INC (@INC contains: /usr/share/shorewall /usr/local/lib/perl5 /usr/local/share/perl5

Hi, I''ve been having a really strange thing happen. I can''t remember when it happened, or if it coincided with a shorewall update, but if I have shorewall "running", my 100mbps connection is limited to about 1-6mbps per connection. This is with TC/Shaping/QoS disabled or enabled. I have no idea if its shorewall doing something funky or ipables or what, but if I

Hola a todos, perdonar que escriba en español pero no tengo traductor a mano.. intento configurar shorewall siguiendo esta guía: http://www.montanalinux.org/proxmox-ve-with-shorewall.html pero me dice esto con el shorewall check: Checking /etc/shorewall/interfaces... ERROR: Unknown zone (dmz) : /etc/shorewall/interfaces (line 16) ¿cómo puedo definirla en el archivo de zonas? gracias y perdonar

I just got the list confirmation and noticed it''s text only email so here it is again in plain text. Below is the oringal message. Hi all, I am really struggling with this one, I have built a lot of linux machines using IPSEC tunnels and shorewall gateways. I decied to build a new test machine with Debian running 2.4.25 and Shorewall 2.0.15. I have two subnets on their own switches and

Hello, I''m new in the list. I''ve installed Mandrake MNF and it works fine but I''ve a problem in sending emails. Small text mails can go out but bigger ones, with attachements, have problems. My network is formed by Windows workstations and only the firewall is a Linux box. The first simptom is the reaching of ISP''s server time out and then my mail client goes in

I''m getting 2 or three of these a day...Any ideas ? The 192.168.250.zz is a eth0:3 on a box that currently only has eth0:1 active Dec 1 15:47:40 machine-name kernel: Shorewall:all2all:REJECT:IN= OUT=eth0 SRC=my.real.ip.addr DST=66.228.216.22 LEN=68 TOS=0x00 PREC=0xC0 TTL=255 ID=12031 PROTO=ICMP TYPE=3 CODE=1 [SRC=66.228.216.22 DST=192.168.250.zz LEN=40 TOS=0x00 PREC=0x00 TTL=46

Hi, I run two live c-class subnets on the internet. Last Sunday morning I was hit with a DDoS attack and it hasn''t stopped. I made modifications on my shorewall firewall during Sunday to lesson the impact, as they were hammering me with 180k/5sec traffic both ways (inbound and outbound). One of the primary things which helped reduce their DDoS was enabling "norfc1918" on the

Hi, I''m running Slackware 13.37 x86 using Shorewall 4.4.21 with OpenVPN and the VPN options I''m using in Slackware 13.37 will not work in Shorewall, but in Slackware 13.1 using the same Shorewall version and files, the ''interfaces'', ''policy'' and ''zone'', are all I have configured, it was working and this also works in Arch at

I have added a 4th NIC to my setup, and want to set up wireless. I have stared at the configuration Tom has for the last week, and my eyes are crossing. eth0 "net" goes to my internet connected firewall with a 192.168 address eth1 "loc" goes to my switch connected to local switch also 192.168.x eth2 "work" goes to my office with a 172. address eth3 Trying to

Hi, I''ve setup quagga on a shorewall firewall server. The only purpose for this is to use BGP to connect to a "peering platform" supplied by our data centre supplier. There are some very large ISP''s (and other various providers including google) on this peering platform and connecting to it will speed up access to/from our services and hosted servers. The physical

Hi, I am trying to get L2TP roadwarrior VPN working from http://www.shorewall.net/IPSEC-2.6.html#RW-L2TP but i am making a mistake somewhere, appreciate a fresh set of eyes to help. I have the following interfaces: ppp0 - interneteth0 - local networkrem - client openvpnl2tp - ppp for lt2p clients I am getting the following error logged when trying to connect into the server with L2TP from a remote

Hi, I have a setup that consist of 2 firewalls connected over dialup and PPP. Each side of the ppp are protected by shorewall. One side of the PPP masquerades everything not addressed to the local network to its eth0 (the net). fw1 <---- ppp (dialup) -----> fw0 <----- NET When making an http request to a site on the Internet from the machine not directly connected to the net (fw1), the

I''m following the document; <http://flurdy.com/docs/postfix/>, and SSH only By default Shorewall in Ubuntu has an empty set up. You can find the default values for Shorewall in /usr/share/doc/shorwall-common/default-config. And examples in /usr/share/doc/shorwall-common/examples. We will create a basic set up. First configure which network adapters we are accessing the net. cp

Hello, I would appreciate any feedback/suggestions on my Shorewall configuration for a standalone laptop Debian Squeeze configuration for ppp0 and wlan0, set out below: ------------------ My current system: ------------------ I have successfuly configured Shorewall 4.4.11.6 on my standalone Debian Squeeze laptop for a ppp0 (Mobile broadband) connection using GNOME PPP, works great (refer to

Beta 1 is now available for testing. ---------------------------------------------------------------------------- I. P R O B L E M S C O R R E C T E D I N T H I S R E L E A S E ---------------------------------------------------------------------------- 1) Previously /var/log/shorewall*-init.log was created in the wrong Selinux context. The rpm''s have been modified to

Beta 1 is now available for testing. ---------------------------------------------------------------------------- I. P R O B L E M S C O R R E C T E D I N T H I S R E L E A S E ---------------------------------------------------------------------------- 1) Previously /var/log/shorewall*-init.log was created in the wrong Selinux context. The rpm''s have been modified to