similar to: tsclient/rdesktop connection to Vista?

I want to use Centos5 as my host os and virtualize a windows server on it. My question is..do i have to be at the machine to setup the windows server inside the virtual server since windows 2k3 is gui based or can i do this remotely somehow? -- My "Foundation" verse: Isa 54:17 No weapon that is formed against thee shall prosper; and every tongue that shall rise against thee in

Hi all, I've recently upgraded a system from CentOS 4.4 to CentOS5, and now when the system boots, the r8169 ethernet card doesn't come up. After the boot sequence, if I type "ifup eth1 | ifup eth1.10 | ifup eth1.203" then the adapter starts up ok. It seems to be something with the boot sequence it loads the ethernet adapters a different way around (ie 4.4 eth0 is now

Hi list, I've made a new CentOS 5 install with all updates. My users are sored in a ldap directory. If i reboot the machine, CentOs hangs at: starting messagebus I found the same problem at Fedora 5. The solution should be to change "etc/init.d/ladp" from 27 to 21 so it starts before messagebus (22) So is this the "right" solution or is there a other way? Thanks

Hi, I applied a set of iptables rules and started iptables without any trouble. But after i edited the rules and restarting it, it gives me "Applying iptables firewall rules: iptables-restore: line 35 failed". I looked into /etc/sysconfig/ for the mentioned file and it was not found. I did a quick check and locate only found /sbin/iptables-restore. I had done updatedb before using

Hi, I am searching smbmount command on centOS 5. On, CENTOS 4.4, I used it as follows to backup data to a window PC. I want to do it on CentOS 5 now. mount -t smbfs -o ip=192.168.5.225,username=mailbackup,password=secret //server/mail_backups /mnt/maildaily I can not issue such command on centos 5. When I try , It gives below error. [root at mail ~]# mount -t smbfs -o

Looking for recommendations.... On WinXP, I use MusicMatch Jukebox version 9 for all my tinkering with mp3s. What do you guys use that would match the functionality of MMJB? I'm mainly interested in the music library setup of MMJB... -- --- David Woyciesjes

Hi, I'm using CentOS 5 on all my computers here (work + home) and I'm very satisfied with it. Some time ago I purchased a 300 GB external hard drive to store films, music, pictures and documents. Since there's no Windows machine around here (small South French village, town hall and public library use Linux :o)), I replaced the FAT filesystem on the disk by an ext2 filesystem.

Hi all, I have a problem with Sendmail in CentOS 5. I want use authentication for external access. I configure my sendmail.mc: TRUST_AUTH_MECH(`EXTERNAL DIGEST-MD5 CRAM-MD5 LOGIN PLAIN')dnl define(`confAUTH_MECHANISMS', `EXTERNAL GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN PLAIN')dnl But when send a message, show this message: Relaying denied. Proper authentication required. Any idea of

Need some pointers here. I've got CentOS 4.4, and I want to control my OSX 10.4.9 box via VNC. It connects, and I get a little dot for the mouse cursor, but just a black screen. I can see the mouse controlling the OSX desktop... Here's the output when I start in a terminal: [d at f ~]$ vncviewer VNC server supports protocol version 3.889 (viewer 3.3) VNC authentication succeeded

I've put a Nvidia Quadro card in my machine. It was first detected as Quadro4 200/400 NVS. I have the pigtail for dual monitors. I've tried tweaking the xorg file to get it working, to no avail. So I then downloaded the 9631 version driver from Nvidia. The readme for the newer files said that they didn't support this card. I run the installer, it builds the module, but gets

I am using CENTOS 5 and I am stuck where I have to repair my boot loader and all of the files are read only so I cannot fix them. How do I get around this? Thanks Chuck -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20070907/a7d2c2df/attachment.html>

Hello, rdesktop (I''m using tsclient) can only connect to Win XP if I''ve started vncviewer before and have logged in. I want only start the XP instance and then loggin in with rdesktop only. How can I achieve this? kind regards, Oliver kernel = ''/usr/lib/xen-ioemu-3.1/boot/hvmloader'' builder = ''hvm'' memory = ''1024''

Here's the checklist I have so far: 1 - /home partition - separate drive 2 - Files copied to the second drive: /etc/X11/xorg.conf rpm for RPM forge /etc/yum - entire folder /etc/yum/repos.d - entire folder /etc/yum.conf /etc/yumex.conf /etc/yumex.profiles.conf 3 - Files installed via Yum(ex) - Hmmm, need to figure this one out. Any pointers? -- --- David Woyciesjes

Does anyone know how to diagnose the error "Unable to handle kernel paging request at virtual address xxxxxx"? I got this error (followed by a panic and a crash) on a server running CentOS 4.4 with the 2.6.9-42.0.8.ELsmp kernel. The machine is based on an Intel 975XBX2 motherboard (975X chipset). I have built several of these and they have been extremely stable. This one is

A bit of a new guy around these parts... I've done a bit of looking, and haven't found any newbie-friendly instructions on how to add the Dag repository to my CentOS4 box. Could somebody help me out and point me in the right direction? Thanks... -- --- David Woyciesjes

Dear Concerns, I would like to share a very strange problem. I am from Pakistan/Islamabad. Last month i was on trainning from Askari Bank Limited (Juniper). Here in Askari i m running NMS--> MRTGs using CentOs 4.4. On trainning i recieved a call from collique saying "when i "su -l" NMS says "root user doesnot exist". and also MRTGs not working. well i was amazed how

Basically, what I typed was: chown -R user2:user2 * chown -R user2:user2 .* chown -R user2:user2 *.* ...all in /home. Duh. I forgot which way recursive went. So, I then did: chown -R root:root * chown -R root:root .* chown -R root:root *.* ...this time in / to try and f things. Duh again. Other items need to have other owners & groups. So, how can I fix this? In MacOSX, there is a utility

I've got CentOS 5 installed on my hp pavilion ze 5300 laptop and the network configuration UI says my wireless NIC has been correctly identified and assigned what appears to be the right Broadcom device driver on eth1. However, the inteface doesn't come up. Google doesn't find anything recent about using Linux with Broadcom except for someone's passing remark that Ubuntu 7 beta

CentOS Errata and Bugfix Advisory 2012:0382 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-0382.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 85c9cc70486b8650a8dafb58e61bfe20af5b1187a947fc94043e9607b22d4cb7 tsclient-2.0.2-8.el6.i686.rpm

CentOS Errata and Bugfix Advisory 2014:0524 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-0524.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 44b9b120e5b1d7cd11caa55e82a1c86b118d5be7bc32c1e090e0d0988e60f17a tsclient-2.0.2-10.el6.i686.rpm