similar to: Rule and a few drops...

I''m working on setting up a new router/server/etc. box. I''m using Proxmox as the base system (Debian Lenny basically). I''m trying to figure out the right way to configure Shorewall on it. I''ve looked at some of the bridging info but they seem to all be talking about single-interface setups. Could someone look over my setup and give me some input into the

Hi, I have two public ip''s and i want to dedicate one ip for incoming and outgoing to one server. I followed http://www.shorewall.net/shorewall_setup_guide.htm and used the example of the daughter system. I have a machine connected on vmbr0 with address 10.10.10.1 listening on port 80 www. Still I can''t connect to this system. I''m forgetting something? Sincerely,

Hi all. I have currently an OpenVZ server: uname -a Linux vader8.superhost.pl 2.6.32-042stab055.16 #1 SMP Fri Jun 8 19:22:28 MSD 2012 x86_64 x86_64 x86_64 GNU/Linux cat /etc/redhat-release CentOS release 6.2 (Final) lspci | grep -i eth 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) cd /etc/sysconfig/network-scripts

Hi everybody. I''m trying to configure shorewall folowing this manual: http://www.montanalinux.org/proxmox-ve-with-shorewall.html But with shorewall check it tells me thah: Checking /etc/shorewall/interfaces... ERROR: Unknown zone (dmz) : /etc/shorewall/interfaces (line 16) How can I define it in the zone file? thanks for the help. best regards, Santiago.

hello before asking my question I come My name is Santiago and I''m from Spain but I''m in Colombia I followed this guide: https://www.doas.montanalinux.org/proxmox-ve-with-shorewall.html but when I run shorewall check, this error occurs: Checking... Initializing... Determining Zones... IPv4 Zones: net loc Firewall Zone: fw Validating interfaces file... ERROR: Invalid

Hi all, I have a question about a multi-homed Samba file server and interoperability with AD. It's a bit complicated, so please bear with me. I've been running Samba 4.11.6 as an AD server (two DCs) for a while (in RFC2307 mode) in a mixed Windows/Linux environment. I have a server running Proxmox (Debian) with Samba 4.9.5 and it is sharing my huge ZFS volume via Samba to Windows

Hello, When I use a standard Redhat kernel, it's ok. Everything's working right. That the Linux bridge configuration does not work afer I upgraded the kernel to 2.6.33.2. Why? [root at node78 ~]# cat /etc/issue Red Hat Enterprise Linux Server release 5.5 (Tikanga) Kernel \r on an \m [root at node78 ~]# uname -a Linux node78 2.6.33.2 #1 SMP Wed Apr 14 10:10:29 CST 2010 x86_64

I can’t seem to find info about layer 2 tinc tap interface bridge with local physical nic. I have successfully created two nodes configuration with tinc acting as switch. My problem is ethernet packets only flow between two nodes and not to hosts on bridged nic. Example: Server 1 - eth0 bridged with tinc tap device, then bridge gets IP via dhcp server on physical nic subnet. Server 2 - local

Hi, A number of students are unable to connect to our print server from their Windows 10 client laptop without entering a user/pass. More precisely: If you try to connect manually to \\IP it says "Username or password incorrect" and prompts to enter a username/password. Despite the server setting to map all users to guest (see further down). I did a packet dump and the client pc

Hi, I have a big "name problem" with my internal mail server (10.0.0.152). It is "seen" on the internet through DNAT (213.58.230.27). Also there is a MX record pointing to the machine. Everything works fine from the outside. However i can''t set the mail clients on the lan pointing to the mx record, because this one points to 213.58.230.27 and the firewall

Hello, I have this problem: when my mail server on the DMZ starts a connection to the internet it''s ip (213.58.230.26) is "masqueraded" with the firewall ip (213.58.230.50). I wouldn''t mind but there is a one customer who rejects the connection because it makes reverse dns and finds no dns entry for the firewall ip. How can i correct this? Thanks, MSantos shorewall

Hello All! I have Samba Version 2.999+3.0.alpha20-2. Just recently I tried to join the domain using the Win2k Wizard with no success. This functionality worked in the previous version of Samba V. 2.2.3a. If I'm on the same subnet though, it works like a charm. The error I receive is the following: "The following error occurred validating the name "mydomain" The specified

Hi, I'm trying to create a snapshot from a KVM VM: # virsh snapshot-create one-5 error: unsupported configuration: internal checkpoints require at least one disk to be selected for snapshot How can I debug this error message and what does it mean? Some system information: * Ubuntu 13.04 64Bit * virsh --version: 1.0.2 * The XML of the VM is below Thanks for all help... Cheers, Tobias

Hi. We're trying to upgrade an old NT domain to AD. It's our second upgrade, and while the first was successfull this one has raised some issues for existing Windows 7 clients. If we disconnect the computer from the domain and join it back to the new S4 AD it works. Existing clients throws this error in Samba: Kerberos: AS-REQ b1rd42nbtmp648$@NT4DOMAIN from ipv4:10.0.0.42:49472 for krbt

Hello I am trying to redirect all http traffic of unauthorized wifi users on a wireless hotspot to a login page. The problem I have is that I can not disable the regular address translation (I want the source address to stay the same). 10.0.0.7 is the wifi client 195.250.155.29 is the web wifi user tries to access from his browser 195.113.17.94 is my login page 10.0.0.1 is the wifi

Hello, I have 2 ISP uplinks (zones: inet1 and inet2), each with a fixed IP on the outside and a routed subnet (/25 and /26) on the inside. So, behind the firewall i have 2 networksegments (lan1 and lan2) with public IP-addresses. The segments are completely isolated from eachother: hosts in zone "lan1" connect only to "inet1" and hosts in zone "lan2" only connect

I have made a distributed replica3 volume with 6 nodes. I mean this: Volume Name: testvol Type: Distributed-Replicate Volume ID: f271a9bd-6599-43e7-bc69-26695b55d206 Status: Started Snapshot Count: 0 Number of Bricks: 2 x 3 = 6 Transport-type: tcp Bricks: Brick1: 10.0.0.2:/brick Brick2: 10.0.0.3:/brick Brick3: 10.0.0.1:/brick Brick4: 10.0.0.5:/brick Brick5: 10.0.0.6:/brick Brick6:

Hello. In my case I can successfully boot up my Thinkpad X32, but the same configuration doesn't work for my desktop computer with Intel network card, with Intel Boot Agent 2.2 DHCP server is 10.0.0.1, tftpd (used tftp-hpa) runs on 10.0.0.32. netstat told me the daemon listen to 69 UDP port just fine. running tftp in commandline also shows it works (retrieve pxelinux.0 less then 1 second).

Gentlemen, I could not join Win2K station into PDC Domain. I get the message: "The specified user does not exist!" when I tried to join. I read a lot how-to's and all procedures that is available in the web and still not working. In the same network I have Win98 working fine. Any help will be appreciated. Thanks in advance ... The procedures that I followed to join Win2k box in

On Thu, 26 Jan 2017 12:12:41 +0100 Bram Matthys via samba <samba at lists.samba.org> wrote: > Hi, > > A number of students are unable to connect to our print server from > their Windows 10 client laptop without entering a user/pass. More > precisely: If you try to connect manually to \\IP it says "Username > or password incorrect" and prompts to enter a