similar to: traffic shaping stranges

With the below script, whenever I ping 10.0.16.10 (which matches the only filter I have), traffic still get''s sent to the default 1:2 class instead of 1:1 and I don''t know why... Any hints? (kernel 2.6.12, iproute2-2.6.15) tc qdisc del dev eth0 root > /dev/null 2>&1 tc qdisc add dev eth0 handle 1: root htb default 2 tc class add dev eth0 classid 1:1 parent 1: htb rate

Hi! Do you know somthing about hfsc and bps? There''s no output for speed only for packets. Doesn''t hfsc support such a field? tc -s class show dev eth0 class hfsc 1: root Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) rate 0bit 0pps backlog 0b 0p requeues 0 period 0 level 2 class hfsc 1:11 parent 1:1 sc m1 0bit d 18.0ms m2 1000Kbit ul m1 0bit d 0us m2

I try use setup traffic shaping with Shorewall-4.0.2 and have fault. When i start Shorewall with tc-files configured i get follow messages: ... RTNETLINK answers: No such file or directory We have an error talking to the kernel ERROR: Command "tc filter add dev eth2 parent ffff: protocol ip prio 50 u32 match ip src 0.0.0.0/0 police rate 500kbit burst 10k drop flowid :1" Failed

Hello, I have recently started looking at tc and iptables. I have an htb-queue with two classes 1:10 and 1:20 where 1:20 is the default. Then I use iptables to mark all packets I send out on eth1. I then filter marked packets into class 1:10. I expected all packets sent on eth1 to end up in class 1:10, but some packets still go to 1:20. Did I do it wrong? Thank you for any help. regards, David

Hi, i am running imq + htb on my router , the situation is like this eth0 = uplink to my provider eth1 = 1st customer eth2 = 2nd customer eth3 = 3th customer eth0 has limit 512 and i want to share this between eth1 eth2 and eth3 , but not working , this is the script i used, \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ #!/bin/sh

Hi all ! I''m building a network appliance whose goals are to enhance Voip quality on 512/128k DSL links. But, i have a voice quality problem, and i think i''m doing something wrong, but i can''t find what. Please excuse my terrible english, i''m french. >From what i''ve read, tc is the tool i need. I read the documentations, readmes and lartc.org

Thanks for quick reply Andreas! > Every class is allowed to use bandwidth as long as it does not have to > borrow (the specified rate is guaranteed). Prio in HTB only affects > borrowing bandwidth from other classes... In the example below, the class > 1:5 should be allowed to borrow bandwidth before 1:14 does. Thats exactly what I want from HTB to do..to prio the borrowed bandwidth.

Hi I have tested with FC3 but iam not able get any good results on that. in the list some one recomend me that > 3.17 HTB should work I saw latest FC4 test2 has the HTB 3.17 with iptables 1.3.0 i have install in my P4 box, and trying to test when iam uploading its working perfect, but when iam downloading its going to default class can some one experinced the same problem below is the my

Hello... Im trying to setup HTB to allow me to shape traffic from two upstreams that meets on single lan0 interface. I prefer to use HTB qdisc within HTB root qdisc for cleaner rules design. Seems that it doesnt work at all. tc -s class show doesnt show any traffic on other classes attached to HTB qdisc. Linux 2.6.20.7 iproute-2.6.20-070313 Weird thing is that tc -s class show that 1: and 2:

Hi folks...!!! I need to generate qdisc statistics to show my 4 class (10, 20, 30, 40), i`ve all working with HTB and so on, but i need to graph this results e.gwith RRDTOOL. I found a script made in perl, that can to graph my 4 class, but i need to know which IP address on my LAN are using the bandwidth too, in other hand i need to classify the traffic by IP to show. This is an out of my

I''m attempting to set up a hierarchy of tc qdiscs with filters, but the filters don''t seem to be working correctly.  I''m running iptables 1.3.5 with iproute 2.6.16.20060323 on a Gentoo 2.6.18 kernel.  The system takes all my tc setup, but does not filter packets as I am expecting it to based on my ruleset. My tc qdiscs and classes are added correctly and report as

I have to match my packets based on MAC address, which I cannot do in the POSTROUTING chain, so I do it in PREROUTING using MARK. Then, I match on the MARK in the POSTROUTING chain to do a CLASSIFY. But this does not seem to work: wireless-r1 bwlimit # iptables -L -v -n -t mangle Chain PREROUTING (policy ACCEPT 3353K packets, 941M bytes) pkts bytes target prot opt in out source

Hi anyone using sangoma hardware with lartc? pls let me know Thanks Imthiyaz Original Message: ----------------- From: lartc-request@mailman.ds9a.nl Date: Fri, 15 Jun 2007 12:00:07 +0200 (CEST) To: lartc@mailman.ds9a.nl Subject: LARTC Digest, Vol 28, Issue 23 Send LARTC mailing list submissions to lartc@mailman.ds9a.nl To subscribe or unsubscribe via the World Wide Web, visit

Hi, What exactly are the "tokens"? I thought each token allowed the sending of one byte, that tokens are stored in a bucket that can hold a max of "burst" tokens, and that this bucket is filled with tokens at "rate". But theory does not seem to explain the "tc -s .." output in the examples below. And I can''t figure out why or how... #tc qdisc

I thought I had this all worked out, but it seems not. The following tc configuration: tc qdisc del dev ppp0 root 2> /dev/null > /dev/null tc qdisc add dev ppp0 root handle 1: tbf rate 120kbit burst 1200 limit 1 tc qdisc add dev ppp0 parent 1:1 handle 2: prio bands 3 tc qdisc add dev ppp0 parent 2:1 handle 10: sfq perturb 20 tc qdisc add dev ppp0 parent 2:2 handle 20: sfq perturb 20 tc

I''m having trouble getting ingress policing to work on a bridged device. The bridge contains several interfaces: peth0, vif0.0, vif[1-7]0.1, vif[25].1 . (This is under xen, in case the vif''s didn''t give that away, so peth0 is renamed eth0.) The tc rules I have are: tc qdisc del dev peth0 root tc qdisc del dev peth0 ingress handle ffff: tc qdisc add dev peth0 root

Hello, First I want to point out that I''m not so familiar with HFSC, since there not so much info online. But here is my script: ${TC} class add dev ${LAN_IFACE} parent 1:0 classid 1:1 hfsc ls rate 100mbit ul rate 100mbit ${TC} class add dev ${LAN_IFACE} parent 1:1 classid 1:2 hfsc ls rate 90mbit ul rate 90mbit ${TC} class add

Hi, I have problem with this simple script: #!/bin/bash if [ "$1" == "del" ]; then tc qdisc del dev eth0 root handle 1: htb default 10 exit fi tc qdisc add dev eth0 root handle 1: htb default 10 tc class add dev eth0 parent 1: classid 1:1 htb rate 800kbit ceil 900kbit tc class add dev eth0 parent 1:1 classid 1:10 htb rate 300kbit ceil 600kbit tc class add dev eth0 parent 1:1

Hi, I''m using tc and HTB to shape my outgoing ADSL traffic. I was trying to make some graphs on the classes by meassuring the "sent bytes" of each class using rrdtool to store the data (as kbps after conversion). I expected that meassuring the root class I would get values similar that the ones I get measuring the interface counters but they differ by a large amount. Is

Hi all, Can you tell me where is the documentation for the new IFB (implemented in kernels > 2.6.16). Thanks in advance! Nikolay