similar to: traffic shaping

Hello list, I discover strange behaviour of shaping traffic that i setup from Shorewall-4.0.2. I know that this is not Shorewall problem but may be somebody from list can help me or explain this situation. I have follow interfaces in 'tcdevices' files: #INTERFACE IN-BANDWITH OUT-BANDWIDTH # $EXT_IF 500kbit 248kbit $INT1_IF 500mbit

Hi! I have reprise try to resolve this problem, suspended from 17 dec 2005 I have try to apply the suggest of Jerry (see above). The problem still exist. See attach shorewall config, dump and tcpdump when I check to exit whit SSH from firewall... In the masq file is reported the last my attempt in order to resolve my problem, however I have test also the example reported in MultiISP.html, but

Hi All, I''m using Shorewall 3.0.4 and I''m wondering if it is possible to do traffic shapping on only one interface from a bridge. The firewall has got 3 NIC, eth0, eth1, eth2. eth0 and eth2 are bridged, but if I''m right, when you specify a traffic rate for a link, you do it for the interface. In my case, eth0 and eth2 do not appear in the interface file, but it is

Version 3.0.5 with the two-devices setup (eth0 - net, eth1 - loc). Kernel 2.4.29 tcdevices, tcrules, and tcclasses are clones of the wondershaper example (http://www.shorewall.net/traffic_shaping.htm) with eth0 replacing ppp. With TC_ENABLED=Internal in shorewall.conf: ---- Validating /etc/shorewall/tcdevices... Validating /etc/shorewall/tcclasses... ERROR: device A seems not to be

Hello, Thanks for the great Shorewall which has replaced my hard to maintain home-made scripts. First, what works. Our local network is 10.48.X.X with multiple vlan, each on a dedicated interface. We use Shorewall 4.4.11 from Debian Squeeze. We have a 2 ISP: - isp1 : an optical fiber provider with 10 Mbps. - isp2 : a DSL provider with 15Mbits/1Mbits. We use isp2 as the default outgoing

Hi, I''m trying to configure QOS , but I''m don''t have success. My files: #/etc/shorewall/tcdevices #INTERFACE IN-BANDWITH OUT-BANDWIDTH eth0 256kbit 256kbit eth1 256kbit 256kbit eth2 256kbit 256kbit #/etc/shorewall/tcclasses #INTERFACE MARK RATE CEIL PRIORITY OPTIONS eth1

Hi ! I found an excellent article about QoS and traffic shaping for VoIP (Asterisk IAX protocol), which is designed to improve sound quality even over very busy lines. http://www.howtoforge.com/voip_qos_traffic_shaping_iproute2_asterisk Should I just cut and paste all that to shorewall''s tcrules (replacing 4569 with 5060)? Additionally, author of this article uses IAX protocol,

Hello Tom! After i read and analyze some docs about IFB i decide that for implement this feature in Shorewall not need more efforts (of course i may be wrong). If we have 'ifb0' device then we must activate ingress discipline on real device (f.e. eth2) and redirect 'egress' from it to 'ifb0'. tc qdisc add dev eth2 ingress tc filter add dev eth2 parent ffff: protocol ip

Hello Shorewall users, I have some questions I am hoping someone can answer. I have searched around the archives but so far I have been unable to find answers. I am trying to configure traffic shaping on my router/firewall box running Shorewall 3.0.5/kernel 2.4.31 and have run into some problems/questions. My basic set up is: 1500/256kbit ADSL (PPPoE/ppp0) -> Shorewall box

Hi folks, I''m having an issue with rsync between my firewall and an internal box. It seems to be a shorewall issue (or correctly speaking, an issue with my shorewall config) because if I disable shorewall my rsync works fine. And I just can''t find it documented anywhere what I need to do. I have rules like this : root@userver:/etc/shorewall# grep -i Rsync rules

I have two (interconnected) questions: First of all, I''m trying to use IPP2P to classify my P2P traffic and give it a lower network priority. I''ve already successfully built IPP2P into iptables and the kernel. I read http://www.shorewall.net/IPP2P.html, but it''s confusing me. Using the documentation for normal tcrules in 3.0

Hello there, I can modify /etc/shorewall/tcdevices to control overall IN-BANDWITH. It is quite effective. Just change 2mbit to 128kbit. However, how do I limit download speed for a certain host IP on the LAN? I want to limit host 192.168.1.140 download speed to 128Kbit. Other hosts on the 192.168.1.0 LAN can still surf at 2mbit. Any input welcome. Kind Regards, Michael

Hi all, I''m trying to set up traffic shaping and I''m having some difficulty. Here is what I want, and where I am. 1. HTTP and SMTP traffic needs to be priority 1. 2. All other traffic priority 2 3. Torrent traffic priority 3. My distro is Fedora Core 4, and the torrent protocol does not appear in /etc/protocols. The only protocol is TCP, which HTTP and SMTP is built on top

Hello, My hoster updated its kernel packages... It contained some old problems that should have been fixed. My servers have now a wonderful 2.6.21.5 kernel + grsec running. Both are running Debian 4.0 (stable release). mx:/etc/shorewall# iptables --version iptables v1.3.6 mx:/etc/shorewall# uname -a Linux mx.network-hosting.com 2.6.21.5-grsec-xxxx-grs-ipv4-32 #1 SMP Fri Jul 27 17:18:23 CEST

I have tried to follow the HOWTO''s as best I could to add some traffic shaping to my existing shorewall firewall/router. What I am trying to achieve Top priority to all voip traffic, regardless of sip, iax2 etc. Higher priority for interactive traffic - ssh, http General queue for everything else, but A low priority queue for any ipp2p traffic What I have achieved..... Almost

Hi, my shorewall is version 4.0.15 on Debian Lenny. I have 3 following interfaces: eth0 net (4mbit/512kbit) eth1 loc (100mbit) eth2 loc (100mbit) I want to shape traffic from net on two lan interfaces like: - default is 2000mbit for each local interface - if is no traffic on eth1 is 4mbit for eth2 (and vice versa) My tcdevices eth0 4000mbit 512kbit eth1 -

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Hi: I have a small infrastructure of network of local area, that are based on a computer, with computer and with a Point Access, with Debian Etch 4.0r1. With Shorewall 3.2.6-2. Well. Since I have two cards of network, which of which, I have left like that: Internet --> Router (217.126.221.65) --> eth1 (217.126.221.117) --> eth0 (LAN

Has anybody on this managed to get ChilliSpot and Shorewall to work together? I have managed to get it to work with the supplied firewall script but if I wanted to do my firewall like that I would not be using Shorewall. At any rate, I am having all kinds of trouble translating the supplied rules to something that Shorewall would understand. If anybody has already done it I would love to see the

Mike Lander wrote: > I am building a shorewall box that the last post has the SSH error and > wanted > some feedback from the list if possible. At first I thought the two ISP''s > I > building this > for had two T-1''s with FQ ip''s as it. I have the box built for this ready > to > go. > Now I find out that one of the T-1''s is

Hi! It''s me again bothering you guys, what I want to do is to give full bandwidth to VPN traffic and limit the rest to 30KB/s (kilobytespersecond), ok? Here''s what I have: tcclasses ################################## eth0 1 1kbps 70kbps 1 eth0 2 1kbps 30kbps 2 default eth1 3 15kbps 10000kbps 1 eth1 4