similar to: www.shorewall.net/ftp.shorewall.net is down

Hello, Please see the following picture: http://www.wilson-kwok.com/pptp.jpg I used one to one NAT from 210.0.0.1 to 192.168.0.2 for web server, and then use port forwarding from 210.0.0.1 to 192.168.0.3 for pptp server, but I cannot connect from my home to pptp server. Here is the nat file: 210.0.0.1 eth0:2 192.168.0.2 Here is the rules

Hi, I''m trying to add following iptables rules to shorewall: iptables -I INPUT -d 192.168.1.1 iptables -I OUTPUT -s 192.168.1.1 What should I put in my custom action or any ware else? I need these rules for munin accounting. iptables -L INPUT -v -n -x Chain INPUT (policy DROP 5 packets, 260 bytes) pkts bytes target prot opt in out source destination 7175

Hello *, I''m trying to setup Shorewall under Ubuntu 7.04 and Xen configured to use network-dummy instead of network-bridge (network-bridge seems to be buggy at the moment under Debian/Ubuntu). Is there a shorewall config example I can use in combination with network-dummy? In particular, with network-dummy there is no peth interface and the bridge include the real eth interface. I

I''m currently using Shorewall 3.4.1 to manage a firewall for my LAN at home. It works very well, and I''m definitely pleased, but . . . . I now have a situation where I need to enforce access restrictions on a specific computer during specific times of day -- e.g., a particular computer might have no Internet access at all between 10 PM and 6 AM. Is there any way to do such a

The following systems will be down this weekend for server rebuild: shorewall.net lists.shorewall.net www1.shorewall.net ftp1.shorewall.net rsync.shorewall.net cvs.shorewall.net This will affect: Shorewall site and archive search Mailing list archives Mailing lists CVS Primary DNS for shorewall.net I will start the rebuild on Saturday morning and hope to be done by Saturday

I''ve uploaded Beta 4. It corrects a bad bug involving exclusion in the hosts file. In addition, it contains the first release of a new Bridge/firewall implementation that uses the reduced-function physdev match found in kernel 3.6.20 and 3.6.21. -Tom -- Tom Eastep \ Nothing is foolproof to a sufficiently talented fool Shoreline, \ http://shorewall.net Washington USA \

I''ve uploaded Beta 4. It corrects a bad bug involving exclusion in the hosts file. In addition, it contains the first release of a new Bridge/firewall implementation that uses the reduced-function physdev match found in kernel 3.6.20 and 3.6.21. -Tom -- Tom Eastep \ Nothing is foolproof to a sufficiently talented fool Shoreline, \ http://shorewall.net Washington USA \

Hi, I´m trying use conntrackd, shorewall and keepalived. Conntrackd (now know as conntrack-tools) is working ok, keepalived too, but i don´t know how to put some iptables rules in shorewall. eth0 is the local area (192.168.0.0/24) eth1 is the net area (192.168.1.0/24) [1] iptables -P FORWARD DROP [2] iptables -A FORWARD -i eth0 -m state --state ESTABLISHED,RELATED - j ACCEPT [3] iptables -A

Hi Tom, hi list. I have an issue in in RC1. The Setup works flawlessly with 3.x and with the shelll compiler of RC1, but with the same setup and the perl compiler my IPSEC traffic gets dropped in net2all chain. Attached is a dump, compiled with perl, including some dropped traffic, e.g. SRC=192.168.66.10 DST=192.168.1.2 Did I overlook something in migration process? Alex

Hi, I''m running mldonkey on same box as shorewall. I follow this http://mldonkey.sourceforge.net/ShorewallConfiguration to open ports for edonkey protocol I add in /etc/shorewall/rules: # eDonkey 2000 ACCEPT net $FW tcp 4662 ACCEPT net $FW udp 4666 but I could not connect to any edonkey server. I check logs and notice that udp traffic on port 4666 is still dropped. Jul 8 22:35:57

when i start or restart syslog-ng, i''ve above message. Can this be a shorewall or iptables synchro ? mess-mate -- April 1 This is the day upon which we are reminded of what we are on the other three hundred and sixty-four. -- Mark Twain, "Pudd''nhead Wilson''s Calendar"

Hello, Can anyone tell me my shorewall is get hacked ? or local Lan computers got Virus ? please see the following log. http://www.wilson-kwok.com/shorewall.txt Please help --------------------------------- 現在你可輕易阻擋垃圾郵件，立即使用Yahoo! Mail 你就會相信! ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express

Hi, i wonder if there is any need to install shorewall on a machine located in the dmz zone of shorewaal. ( 3 interfaces example) mess-mate -- You are a fluke of the universe; you have no right to be here. ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE

Hi all, The first couple of xen machines we setup used the default xen bridging setup for dom0. I am sure there are many other people out there with this setup. Now that I know a bit more there are probably better ways out there to configure the xen box for firewalling, most notably assigning the red card to a domU and running shorewall in there. But in the meantime I would like to further

Hello list I''m considering moving shorewall to a xen domu and the using the Proxy ARP method (we use NAT today). Is it possible to have a Proxy ARP firewall inside a domu serving requests to other domus with public IP-addresses placed on separate hardware (not the hardware the domu with the firewall is on) ? I figure that there''s a problem since it''s different bridges

I was previously using multiple providers on my "real linux" gateway which had a kernel that supported high marks and I was policy routing in tcrules. I''ve now moved to openwrt where their kernel apparently does not have high marks. I want to continue to be able to have multiple providers and a) policy route between them and b) be able to set marks for other things like

Hi Andreas, I don''t know if the WRV200 is running freeswan or openswan. We use the newest US-version of the linksys firmware 1.0.32.2 from 2.5.2007. Another problem is in accessing the vpn-Gateway itself with ssh for instance, I get a freezing windows, whenever I tranfer more than just a few bytes. I can type my login-name and my password, then get a prompt ... but if I call,

Hi, We have a shorewall firewall running on SUSE 10. We have three nic''s, Lan, DMZ and Internet. We also have a Cisco Pix 506e. We moved from sending all our traffic through the pix to using the Suse box yesterday. The PIX is in the DMZ, with a connection to the LAN switch, the idea being that VPN users can connect to the pix to the lan. The Pix is on the 10.0.1.x subnet, the lan is

I see support in shorewall for the KAME-tools, how about strongswan ? I have setup shorewall 3.4.4 and strongswan 4.1.3, making this my vpn-gateway for the subnet behind it. # Shorewall version 3.4 - Zones File #ZONE TYPE OPTIONS IN OUT # OPTIONS OPTIONS fw firewall fil ipsec mode=tunnel mss=1400 net ipv4

Hi, I''m using following rule in /etc/shorewall/rules REJECT:ULOG:P2P loc net ipp2p:all ipp2p iptables -L : Chain loc2net (1 references) target prot opt source destination ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ULOG all -- anywhere anywhere ipp2p v0.8.2--ipp2p ULOG