similar to: Re: IPSec Passthrough fails when using CiscoVPNclient

Hi Andreas, I don''t know if the WRV200 is running freeswan or openswan. We use the newest US-version of the linksys firmware 1.0.32.2 from 2.5.2007. Another problem is in accessing the vpn-Gateway itself with ssh for instance, I get a freezing windows, whenever I tranfer more than just a few bytes. I can type my login-name and my password, then get a prompt ... but if I call,

I have no idea whatsoever as to why racoon/IKE does not work here. I've tried various how-to documents but found nothing that works for me. Gateway (10.0.0.1) running 4.9-stable. Laptop (10.0.0.10) running 5.2.1-release. Both running racoon-20040408a On the gateway 10.0.0.1 # cat /etc/ipsec.conf add 10.0.0.1 10.0.0.10 esp 691 -E rijndael-cbc "1234567890123456" -A hmac-sha1

Hi, I have been using IPsec to communicate between a laptop that tracks -stable and a Linksys BEFVP41 router. I only use it infrequently, but it's been working great. My setup is as described in http://grapeape.alerce.com/linksys-ipsec/article.html (which I am planning to submit to the handbook when it's done). I'm no longer able to make an ipsec connection, and I can't put my

Hi, I'm trying to get IPsec running between 2 FreeBSD (VMware) boxes, using racoon2. spmd and iked start up okay, but I get an error when I try a ping across the tunnel. /var/log/messages shows: May 5 13:52:36 biosa-vm4 iked: [INTERNAL_ERR]: if_spmd.c:726: SLID failed: 550 Operation failed May 5 13:52:36 biosa-vm4 iked: [INTERNAL_ERR]: isakmp.c:647:isakmp_initiate_cont(): 0:172.20.36.55[0]

Hello, I'm having a bit of trouble connecting our current CentOS Openswan server with a Vyos server via IPSec. I've posted this on the VyOS forums, but haven't had many helpful responses, so I thought I would ask here. http://forum.vyos.net/showthread.php?tid=26504&pid=29703#pid29703 Basically our Openswan configuration is as follows: conn VYOS keyingtries=0

Hi all. The IPSec part of the LARTC howto is great, but I''ve hit a problem in 7.3. IPSEC tunnels. The example given is for manual keying: add 10.0.0.216 10.0.0.11 esp 34501 -m tunnel -E 3des-cbc "123456789012123456789012"; How does one setup "tunnel mode" using racoon? Trying to setup an ipsec tunnel between two subnets: 10.10.42.0/24 and 10.1.1.0/24 using a

I am trying to get a tunnel from a cisco 1760 with IOS 12.2.15.t13 to a freebsd 4.9 install with racoon. I have package version freebsd-20040408a and internal version 20001216 in my log file. I posted the full racoon and cisco log below my configs. Racoon keeps saying: 2004-07-26 16:24:03: DEBUG: isakmp.c:2295:isakmp_printpacket(): begin. 2004-07-26 16:24:03: DEBUG:

Are there any tools to decode encrypted part of isakmp provided that identities of both peers are known to me and that I am able to observe the whole exchange ? -- Andriy Gapon

Try setting lower keyexpiry time on other endpoint. -- Eero 2016-02-09 17:04 GMT+02:00 John Cenile <jcenile1983 at gmail.com>: > Hello, > > I'm cross posting this from the OpenSwan mailing list, in case someone here > can help. > > We have two sites connected via OpenSwan 2.6.32-9 on CentOS 5, sharing 6 > /24 subnets each (so 12 in total). > > The problem

Hello, I'm cross posting this from the OpenSwan mailing list, in case someone here can help. We have two sites connected via OpenSwan 2.6.32-9 on CentOS 5, sharing 6 /24 subnets each (so 12 in total). The problem we're having is completely randomly, be it in the middle of the day, or in the middle of the night (so I don't believe it's traffic related), certain (and sometimes

Hi, I've some problems with this network : [ host1 eth0: 10.22.2.4/8 ] [ host2 eth0:10.22.2.5/8 default route host3] \ / SWITCH internet | | |

Hello, Can anyone tell me my shorewall is get hacked ? or local Lan computers got Virus ? please see the following log. http://www.wilson-kwok.com/shorewall.txt Please help --------------------------------- 現在你可輕易阻擋垃圾郵件，立即使用Yahoo! Mail 你就會相信! ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express

Hi, I''m trying to add following iptables rules to shorewall: iptables -I INPUT -d 192.168.1.1 iptables -I OUTPUT -s 192.168.1.1 What should I put in my custom action or any ware else? I need these rules for munin accounting. iptables -L INPUT -v -n -x Chain INPUT (policy DROP 5 packets, 260 bytes) pkts bytes target prot opt in out source destination 7175

when i start or restart syslog-ng, i''ve above message. Can this be a shorewall or iptables synchro ? mess-mate -- April 1 This is the day upon which we are reminded of what we are on the other three hundred and sixty-four. -- Mark Twain, "Pudd''nhead Wilson''s Calendar"

Hi, I''m running mldonkey on same box as shorewall. I follow this http://mldonkey.sourceforge.net/ShorewallConfiguration to open ports for edonkey protocol I add in /etc/shorewall/rules: # eDonkey 2000 ACCEPT net $FW tcp 4662 ACCEPT net $FW udp 4666 but I could not connect to any edonkey server. I check logs and notice that udp traffic on port 4666 is still dropped. Jul 8 22:35:57

Hello list I''m considering moving shorewall to a xen domu and the using the Proxy ARP method (we use NAT today). Is it possible to have a Proxy ARP firewall inside a domu serving requests to other domus with public IP-addresses placed on separate hardware (not the hardware the domu with the firewall is on) ? I figure that there''s a problem since it''s different bridges

Hi, i wonder if there is any need to install shorewall on a machine located in the dmz zone of shorewaal. ( 3 interfaces example) mess-mate -- You are a fluke of the universe; you have no right to be here. ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE

Hello *, I''m trying to setup Shorewall under Ubuntu 7.04 and Xen configured to use network-dummy instead of network-bridge (network-bridge seems to be buggy at the moment under Debian/Ubuntu). Is there a shorewall config example I can use in combination with network-dummy? In particular, with network-dummy there is no peth interface and the bridge include the real eth interface. I

Hi, When a IPSec tunnel is established between two peers, I understand that the "normal" situation is to have in a given moment two SAs, one for each direction of the tunnel. However, in one of my tunnels (peer P1 running GNU/Linux with setkey and racoon; peer P2 is a Cisco router) there is a large number (around 19) of SAs established (this has been observed in P1 with

Hello, Please see the following picture: http://www.wilson-kwok.com/pptp.jpg I used one to one NAT from 210.0.0.1 to 192.168.0.2 for web server, and then use port forwarding from 210.0.0.1 to 192.168.0.3 for pptp server, but I cannot connect from my home to pptp server. Here is the nat file: 210.0.0.1 eth0:2 192.168.0.2 Here is the rules