similar to: xymon macro

Hello everyone. I recently created a set of external scripts for the Xymon Networking Monitor system to monitor and graph AC input voltage, AC output voltage, battery charge %, battery voltage, and UPS Load % of UPSes managed by the Network UPS tools (NUT) suite. The scripts make use of the "upsc" program to poll the upsd daemon and report the information back to the Xymon server for

On Mon, 2019-08-05 at 13:06 +0100, Giles Coochey wrote: > On 05/08/2019 12:56, John Horne wrote: > > Hello, > > > > I was looking at a process through the '/proc' file system, and came across > > a process name which seemed to contain a hex value: > > > > lrwxrwxrwx. 1 xymon xymon 0 Aug 2 14:07 /proc/58032/exe -> > >

Hello, I was looking at a process through the '/proc' file system, and came across a process name which seemed to contain a hex value: lrwxrwxrwx. 1 xymon xymon 0 Aug 2 14:07 /proc/58032/exe -> /usr/sbin/xymond;5d44410e (deleted) I am aware of what the 'deleted' part means, but have no idea what the ';5d44410e' part means. Is this some sort of thread reference? The

Hello I''m trying to setup tinyproxy and shorewall on a LEAF Bering firewall. What I''d like to do is block all HTTP connections to the internet on port 80 and 8080 and force users to use port 8888. So in shorewall/rules I have ACCEPT loc fw tcp 8888 DROP loc fw tcp 80,8080 The ACCEPT works fine but the DROP does not seem to work. If I

Hi everybody, I have my firewall with shorewall runing and I dont have a proxy. I would like to know which tool can I use to log my web traffic from my users. I have ntop working but I dont think this tool helps me on this. Any suggestion? Thanks ------------------------------------------------------------------------------ LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial

Hello all, I''m using shorewall on a linux machine that has two interfaces, eth0 being connected on the internal network (10.10.10.0/24) and eth1 being connected to the external network. On eth0 the IP is statically configured to 10.10.10.254 and there is a dhcp server running for the machines in the private network. On eth1, the IP is dynamically assigned by my ISP modem that acts as

Hi!!!! somebody have tips for install openvpn-as and shorewall!? thx. ------------------------------------------------------------------------------ LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial Remotely access PCs and mobile devices and provide instant support Improve your efficiency, and focus on delivering more value-add services Discover what IT Professionals Know.

Hi, as per the shorewall MultiISP documentation ( http://www1.shorewall.net/MultiISP.html ), it says "Use of this feature requires that your kernel and iptables include CONNMARK target and connmark match support (Warning: Standard Debian™ and Ubuntu™ kernels are lacking that support!)." it means MultiISP wont work properly if i am using Ubuntu server. if yes whats the

Hi all, I have a test lab installed over an ESXi 5.1 host that contains 5 CentOS vm guests. I would like to monitor CPU, RAM and Network for these vm and ESXi host. Zabbix and Nagios are too to accomplish this task. Does anyone know any lightweight openosurce soft to do this?? Thanks.

Hi, I have a rule: DNAT net dmz:a.b.c.d tcp 25 - k.l.m.n The problem: I want to DNAT port 25, 143, 110 k.l.m.n is alternate public ip (using vrrp, just like alias) Can I abridge the above line using macro, instead of writing 3 separate lines? I can do: MailPorts/DNAT net dmz:a.b.c.d But this refer to the physical public ip I have more elaborate requirement to forward around 20

Hey, I have a setup that has one machine communicating to a server using UDP over IPv6. For specifics, it is using collectd with a boosted MaxPacketSize in the network config. What this means is there is some IP fragmentation happening, and that is getting REJECTed. My policy is to REJECT, and I have an ALLOW for the particular communication I want. What I''m getting in my logs is

Anex. Thanks Tom. 2010/5/12 Tom Eastep <teastep@shorewall.net> > On 5/12/10 2:47 PM, Orlandinei Vujanski wrote: > > Tom, all right? > > > > Until yesterday my shorewall was working perfectly, but today it stopped > > working. I already restarted the server, already changed the rules and > > did not work. > > > > My shorewall this in 4.0.15

Beta 3 is now available for testing. Corrections in this release: 1) Corrections included in Shorewall 4.4.21.1. 2) Several problems reported by Steven Springl. The rest is largely cleanup of the new rule infrastructure. -Tom -- Tom Eastep \ When I die, I want to go like my Grandfather who Shoreline, \ died peacefully in his sleep. Not screaming like Washington, USA \

Beta 3 is now available for testing. Corrections in this release: 1) Corrections included in Shorewall 4.4.21.1. 2) Several problems reported by Steven Springl. The rest is largely cleanup of the new rule infrastructure. -Tom -- Tom Eastep \ When I die, I want to go like my Grandfather who Shoreline, \ died peacefully in his sleep. Not screaming like Washington, USA \

RC 3 is now available for testing. Problems corrected: 1) The Shorewall and Shorewall6 ''load'' and ''reload'' commands previously used the setting of RSH_COMMAND and RCP_COMMAND from /etc/shorewall/shorewall.conf (/etc/shorewall6/shorewall6.conf). These commands now use the .conf file in the current working directory. 2) The new parameterized

RC 3 is now available for testing. Problems corrected: 1) The Shorewall and Shorewall6 ''load'' and ''reload'' commands previously used the setting of RSH_COMMAND and RCP_COMMAND from /etc/shorewall/shorewall.conf (/etc/shorewall6/shorewall6.conf). These commands now use the .conf file in the current working directory. 2) The new parameterized

Hi list, I''m struggling with this problem for a long time, hopefully someone can explain me what I''m doing wrong: I have a shorewall installation with interfaces net eth0 - eth1 hosts loc 10.0.10.0/24 loc 10.0.20.0/24 +some other zones and subnets there are aliases on eth1 for gateways for the two loc subnets eth1:1 10.0.10.1 eth1:2 10.0.20.1 Everything works fine, loc

On 05/08/2019 12:56, John Horne wrote: > Hello, > > I was looking at a process through the '/proc' file system, and came across a > process name which seemed to contain a hex value: > > lrwxrwxrwx. 1 xymon xymon 0 Aug 2 14:07 /proc/58032/exe -> > /usr/sbin/xymond;5d44410e (deleted) > > I am aware of what the 'deleted' part means, but have no idea what

hi, I have a dedicated server with several services running: ssh, ftp, httpd (with several sites andactive domains), the mail server (dovecot, postfix), dns. I'd like to monitor all of these services in a graphical, easy, setting of thresholds and alerts via email. I would also like that if a customer wanted to see the graphs I could create codes read-only. there is one or more software

I''m trying to use my VPS server (single interface of course) as somewhat of a VPN gateway to my other location (which is not accessible directly from some places) where the openvpn server is running, and am kind of lost as to what to try next. I tried a redirect rule, but apparently shorewall didn''t like that (it just failed to start). I tried adding the rules via