similar to: My nut-snmp has forgotten how to speak IETF RFC1628!

Hello, I am running Windows XP and Windows NT workstations on a lan with a samba 2.2.4 server providing files and printers to these workstations. I have the following printers shared by samba: HP LaserJet 1200 Epson Stylus Color 3000 Epson Stylus Pro XL HP DesignJet 755 CM HP DesignJet 2500 CP The problem I am having is that Windows XP and Windows NT are using different drivers for the same

I am trying to associate a driver that i installed with mkprintpkg and install_printer_drivers.pl with the printer that its supposed to go with. this is a log of what is happening: nendral:~ # rpcclient nendral -U root -W xxxx Enter Password: session setup ok Domain=[xxxx] OS=[Unix] Server=[Samba 2.2.4] rpcclient $> enumdrivers [Windows NT x86] Printer Driver Info 1: Driver Name:

Hi Charles, I am using the same configs as I have in Linux Mint. What do I need to change here? ups.conf [defender] ??? driver = blazer_usb ??? port = auto ??? pollinterval = 5 ??? desc = "PowerShield Defender 650" upsd ??? default.battery.voltage.high = 13.70 ??? default.battery.voltage.low = 10.40 upsd.users [local_mon] ??? ??? password = ******** ??? ??? allowfrom =

Thanks Roger for all your help here. I hope the 2 attachments come through. The .sh is my doctored version of the script and the .report is its output. I welcome any suggestions or ideas about what might be causing my problems with monitoring to the Belkin UPS. Cheers On 7/12/2019 10:12 AM, Roger Price wrote: > On Fri, 12 Jul 2019, David White wrote: > >> Hello, thanks, and sorry

Well it is the season for storms and power outages here in the US PNW. I noticed that today when the power went out, NUT mostly did what I hoped/wanted. But it did not actually turn off the UPS at all. The UPS kept beeping and I had to turn it off manually. I thought that NUT would handle this. But perhaps it cannot for my unit? Or perhaps I have things improperly configured? Any suggestions?

Hi Roger and thanks! I have attached my nut report from the new script (sans journal). I saw nothing that looked like a problem with the report save the sections <scriptname> "Cannot access <scriptname>. Perhaps this is from the missing journal? On 7/14/2019 7:52 AM, Roger Price wrote: > On Tue, 9 Jul 2019, Charles Lepple wrote: > >> Can you please run this script

Hi, I've been trying to get my new Tripplite OmniVS100 UPS (USB Connection) to work on my system. What I have is: Ubuntu 10.04 Server Nut 2.4.3 /etc/nut/ups.conf [omni] Driver = usbhid-ups Port = auto Desc = "My Server" /etc/nut/nut.conf MODE=standalone I followed the instructions at this link:

I'm trying to execute some commands on my ups, but I keep getting ERR ACCESS-DENIED upscmd -l sinus Instant commands supported on UPS [sinus]: beeper.toggle - Toggle the UPS beeper load.off - Turn off the load immediately load.on - Turn on the load immediately shutdown.return - Turn off the load and return when power is back shutdown.stayoff - Turn off the load and remain off shutdown.stop -

Manufacturer: Aviem Power RT 1000-3000VA Description: Rack/Tower Intelligent Online LCD UPS. connected with serial cable. #upsc battery.voltage: 24.96 battery.voltage.low: 21.5 battery.voltage.nominal: 24.0 beeper.status: enabled device.mfr: device.model: device.type: ups driver.name: blazer_ser driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ttyUSB1 driver.version: 2.6.3

On Tue, 31 Dec 2019, David White wrote: > ... But it did not actually turn off the UPS at all. The UPS kept > beeping and I had to turn it off manually. > > I thought that NUT would handle this. But perhaps it cannot for my unit? Or > perhaps I have things improperly configured? Any suggestions? Thanks and > happy new year! > ########### /etc/nut/upsmon.conf

This mib used to work, so is there a way to go back to the version prior to this one without downgrading the whole package? * Starting UPS drivers... Network UPS Tools - UPS driver controller 2.4.1 Network UPS Tools - Generic SNMP UPS driver 0.44 (2.4.1) Detected GXT2-2000RT120 on host upswallleft (mib: ietf 1.3) [upswallleft] nut_snmp_get: 1.3.6.1.2.1.33.1.4.4.1.4.0: Error in

OpenBSD 5.6 nut-2.7.2 (bin package) Liebert IntelliSlot Unity Card IS-UNITY-DP ups.conf: ...... ? mibs = ietf ? snmp_version = v1 ...... The problem is that the card responds to other snmp (v1,2c,3) requests normally but not to the 1.3.6.1.2.1.33.1.1.1.0 (UPS-MIB.upsIdentManufacturer). # snmp-ups -a laes2ups -DDDDDDD Network UPS Tools - Generic SNMP UPS driver 0.72 (2.7.2) ?? 0.000000???? debug

Hi! I am not really experienced with UPS devices or UPS control software like NUT but i am enthusiastic and trying to use Eaton-9130 (it has one extra EBM too) as rationally as possible with NUT. I believe in general things are under control and behave, although i have some glitches and i would like to ask for help. I am using Debian v. 7 amd64 and from its packages nut-server and nut-client, v.

On 1/1/2020 2:21 AM, Roger Price wrote: > On Tue, 31 Dec 2019, David White wrote: > >> ... But it did not actually turn off the UPS at all. The UPS kept >> beeping and I had to turn it off manually. >> >> I thought that NUT would handle this. But perhaps it cannot for my >> unit? Or perhaps I have things improperly configured? Any suggestions? >> Thanks

When european accentuated characters in strings are displayed to uppercase , the accent is displayed... I know there is ( was) a gem or library to managed such internationalized strings better ... but I can''t remember the name .. anyguess ? thanks -- You received this message because you are subscribed to the Google Groups "Ruby on Rails: Talk" group. To post to this

Signed-off-by: Ilia Mirkin <imirkin at alum.mit.edu> --- Silences a warning about unrecognized param when in debug mode. src/gallium/drivers/nv30/nv30_screen.c | 1 + 1 file changed, 1 insertion(+) diff --git a/src/gallium/drivers/nv30/nv30_screen.c b/src/gallium/drivers/nv30/nv30_screen.c index 40e8b5f..39e64ce 100644 --- a/src/gallium/drivers/nv30/nv30_screen.c +++

Hi @llvm, I had to comment out template<> struct DFSetTraits<LoopBlocksTraversal> { static void finishPostorder(BasicBlock *BB, LoopBlocksTraversal& LBT) { LBT.finishPostorder(BB); } }; in LoopIterator.h in order to get the latest llvm compiling. I guess it is going to be removed anyway. Best regards Olaf Krzikalla

I am sorry to say, but for me it still doesn' work. Do you have more hints how to narrow down what's causing the problem? Thank you in advance.

<https://wiki2.dovecot.org/Mountpoints> The list of ignored mount points are stored in a directory (/var/run) that's cleared on reboot. (On CentOS it's a RAM disk.) It seems this should be stored in /etc/dovecot to remain persistent across reboots. <https://en.wikipedia.org/wiki/Filesystem_Hierarchy_Standard> I discovered this when I saw a dovecot error message in

Hello, I have Mustek Powermust 2000VA USB And installed latest nut. Problem is that I cannot get info from UPS: http://pastebin.com/BtpE2Be1 I got contact with UPS via blazer_usb driver http://pastebin.com/38BZteFC Ups.conf: http://pastebin.com/KwRrz5rf Upsd.conf: http://pastebin.com/i3jNHpVj Upsd.users: http://pastebin.com/TRJ5ahWR Lsusb: http://pastebin.com/WsEbkPqG Dmesg: