similar to: Ghost file.

Not being familiar with chip sets and other factors that "hardware experts" understand, I am perplexed with the multitude of available motherboards. Is there a Web site that can be of help or a "strategy"? My goal is to replace my motherboard with one that is Centos compatible and uses a Pentium 4 in the 2 MHz range. As example, when I go to Mwave, I am presented with

Hello, in the BSD Authentication system the login script can request environment variables to be set/unset. The call to auth_close() in auth-passwd.c does change the current environment, but those changes are lost for the child environment. It would be really useful to add some kind of mechanism to get those changes into the child environment. I've added two possible solutions. Both

Nithya, Responding to an earlier question: Before the upgrade, we were at 3.103 on these servers, but some of the clients were 3.7.6. From below, does this mean that ?shared-brick-count? needs to be set to 1 for all bricks. All of the bricks are on separate xfs partitions composed hardware of RAID 6 volumes. LVM is not used. The current setting for cluster.min-free-inodes was 5%. I changed it to

On 31 January 2018 at 21:34, Freer, Eva B. <freereb at ornl.gov> wrote: > Nithya, > > > > Responding to an earlier question: Before the upgrade, we were at 3.103 on > these servers, but some of the clients were 3.7.6. From below, does this > mean that ?shared-brick-count? needs to be set to 1 for all bricks. > > > > All of the bricks are on separate xfs

The values for shared-brick-count are still the same. I did not re-start the volume after setting the cluster.min-free-inodes to 6%. Do I need to restart it? Thanks, Eva (865) 574-6894 From: Nithya Balachandran <nbalacha at redhat.com> Date: Wednesday, January 31, 2018 at 11:14 AM To: Eva Freer <freereb at ornl.gov> Cc: "Greene, Tami McFarlin" <greenet at

On 31 January 2018 at 21:50, Freer, Eva B. <freereb at ornl.gov> wrote: > The values for shared-brick-count are still the same. I did not re-start > the volume after setting the cluster.min-free-inodes to 6%. Do I need to > restart it? > > > That is not necessary. Let me get back to you on this tomorrow. Regards, Nithya > Thanks, > > Eva (865) 574-6894

Hi Eva, I'm sorry but I need to get in touch with another developer to check about the changes here and he will be available only tomorrow. Is there someone else I could work with while you are away? Regards, Nithya On 31 January 2018 at 22:00, Freer, Eva B. <freereb at ornl.gov> wrote: > Nithya, > > > > I will be out of the office for ~10 days starting tomorrow. Is

Hi Freer, Our analysis is that this issue is caused by https://review.gluster.org/17618. Specifically, in 'gd_set_shared_brick_count()' from https://review.gluster.org/#/c/17618/9/xlators/mgmt/glusterd/src/glusterd-utils.c . But even if we fix it today, I don't think we have a release planned immediately for shipping this. Are you planning to fix the code and re-compile? Regards,

Hi, I think we have a workaround for until we have a fix in the code. The following worked on my system. Copy the attached file to */usr/lib*/glusterfs/**3.12.4**/filter/*. (You might need to create the *filter* directory in this path.) Make sure the file has execute permissions. On my system: [root at rhgsserver1 fuse2]# cd /usr/lib/glusterfs/3.12.5/ [root at rhgsserver1 3.12.5]# l total 4.0K

Hello all: I''ve been using Shorewall for quite a while at my office and it''s been great! Thanks for the work! I''ve just set up a firewall at home to keep my teenagers under control (shorewall, squid and dansguardian). I''ve also set up a cron job that switches my shorewall rules between a day and a night configuration. The night configuration blocks

Hi, In btrfs, inode number is increased each time a new file or directory is made. Therefore, if the making deletion of the file is repeated, value of ''i_ino'' increases rapidly. For example, inode number changes as follows. $ touch foo $ ls -i foo 266 foo $ rm foo $ touch bar $ ls -i bar 267 bar $ And then, length of ''i_ino'' and

Nithya, I will be out of the office for ~10 days starting tomorrow. Is there any way we could possibly resolve it today? Thanks, Eva (865) 574-6894 From: Nithya Balachandran <nbalacha at redhat.com> Date: Wednesday, January 31, 2018 at 11:26 AM To: Eva Freer <freereb at ornl.gov> Cc: "Greene, Tami McFarlin" <greenet at ornl.gov>, "gluster-users at

I don't seem to be able to find the necessary hardware specs for an Asterisk server. What I have in mind is a dedicated server to serve 50 or so people. All users will use SIP phones and there will be an ISDN gateway for outgoing/incoming calls. Do you have any suggestions about the server specs (CPU, RAM, HD, etc)? Also, has anyone used Epigi Quadro ISDN gateway with Asterisk? If so, what is

Amar, Thanks for your prompt reply. No, I do not plan to fix the code and re-compile. I was hoping it could be fixed with setting the shared-brick-count or some other option. Since this is a production system, we will wait until a fix is in a release. Thanks, Eva (865) 574-6894 From: Amar Tumballi <atumball at redhat.com> Date: Wednesday, January 31, 2018 at 12:15 PM To: Eva Freer

Currently the fs sync function (super.c:btrfs_sync_fs()) doesn''t wait for delayed work to finish before returning success to the caller. This change fixes this, ensuring that there''s no data loss if a power failure happens right after fs sync returns success to the caller and before the next commit happens. Steps to reproduce the data loss issue: $ mkfs.btrfs -f /dev/sdb3 $

I'm looking to install a basic asterisk system for my church with: 8 inbound sip channels 8 sip handsets basic voicemail room to grow (maybe doubling each of the above) What would be a recomended system as to needed processor and memory? Thanks, Eric

Hi all, I took my decision to use Asterisk server for handling my VOIP calls...My next step is to choose the best hardware that I should use i order to have the best performance...Here I faced 2 choices for my hardware (CPU)... 1- Using Intel CPU or AMD 2- Use 32 or 64 bits Can you help me please to choose between the above choices and what is the advantage and disadvantage of each of choices

Hey guys, In your experience what is the best way to go for a production asterisk box in your offices? With desktop prices so cheap you might think that you should just buy them off the shelf, but is that really a reliable machine? Anything you can tell me that would assist me in deciding the best way to obtain and maintain these boxes would be very helpful. I have even looked into building

fs/ocfs2/dir.c: In function ?ocfs2_extend_dir?: fs/ocfs2/dir.c:2700: warning: ?ret? may be used uninitialized in this function fs/ocfs2/suballoc.c: In function ?ocfs2_get_suballoc_slot_bit?: fs/ocfs2/suballoc.c:2216: warning: comparison is always true due to limited range of data type Signed-off-by: Tao Ma <tao.ma at oracle.com> --- fs/ocfs2/dir.c | 2 +- fs/ocfs2/suballoc.c |

Wether the dlm_lock needs to access lvb or not depends on dlm_lock_resource it belongs to. So a new parameter "struct dlm_lock_resource *res" is added to dlm_new_lock() so that we can know if we need to allocate lvb for the dlm_lock. And we have to make the lockres availale for calling dlm_new_lock(). Signed-off-by: Wengang Wang <wen.gang.wang at oracle.com> ---