similar to: HotPlug, eSATA, and /media

> > > > > [root at darkness ~]# ls -al /dev/sr* > > ls: cannot access /dev/sr*: No such file or directory > > [root at darkness ~]# ls /dev/s* > > /dev/sda /dev/sda3 /dev/sdb1 /dev/sg0 /dev/stderr > > /dev/sda1 /dev/sda4 /dev/sdb2 /dev/sg1 /dev/stdin > > /dev/sda2 /dev/sdb /dev/sdb3 /dev/snapshot /dev/stdout > > [root at

On Mon, Jun 24, 2019 at 3:35 AM Pete Biggs <pete at biggs.org.uk> wrote: > On Sun, 2019-06-23 at 22:13 -0400, doug schmidt wrote: > > Hi, > > I'm having an issue with my Thinkpad P70 laptop/workstation. This system > is > > a dual boot, > > windows 10 pro and centos 7. I have not needed to use the cdrom until > now, > > however the system does not

On my machine I have SATA0: HD SATA1: HD these two drives are set as RAID1 SATA2: HD extra SATA3: DVD SATA4: external USB disk Snip from dmesg shows the ATAPI device being detected. ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xe400 irq 10 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xe408 irq 10 ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATAPI: PIONEER BD-ROM

Hi folks. I'm posting this to both the Fedora as well as the CentOS lists in hopes that somewhere, someone can help me figure out what's going on. I have a dual Xeon 3GHz server that's performing rather slow when it comes to disk activities. The machine is configured with a single 160 GiB OS drive (with CentOS 5.0) and 4x500 GiB drives setup in a RAID-5 configuration.

Hey, just bought an eSATA/USB dual drive docking station and my CentOS 5 can only see one drive at a time... Any one knows if there are specific parameters to set somewhere? Or do I need a more recent kernel (like upgrading to CentOS 6?) The docking is a Sharkoon Quickport Duo v2 + 2 drives + 1 eSATA cable... http://www.sharkoon.com/?q=en/content/sata-quickport-duo-v2 The eSATA controller is an

Hey all, Just downloaded the new Xen 4.0 and ran Make xen Make tools Make stubdom Copied the new files from dist/install Im already running pv_ops 2.6.31.6 kernel. When I boot i get (XEN) Panic on CPU 0: (XEN) IO-APIC + timer doesn''t work! I have tried booting with noapic boot option but makes no difference. The system worked fine on 3.4.2 CPU is AMD.

https://bugs.freedesktop.org/show_bug.cgi?id=67161 Priority: medium Bug ID: 67161 Assignee: nouveau at lists.freedesktop.org Summary: Blank video after resuming from S3 or S4 QA Contact: xorg-team at lists.x.org Severity: normal Classification: Unclassified OS: Linux (All) Reporter: mauromol at tiscali.it

Hello, I was wondering if anyone could point me in the right direction? I am receiving these in my log file and do not know what they mean or what to look for; Mar 8 04:03:56 bms kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Mar 8 04:03:56 bms kernel: ata3.00: cmd 25/00:28:42:d3:37/00:00:13:00:00/e0 tag 0 cdb 0x0 data 20480 in Mar 8 04:03:56 bms kernel: res

OK, it seems that the kernel I have (stock CentOS 4.7: 2.6.9-78.0.22.EL i686) seems to gronk the nVideo SATA controller in AHCI mode. It is NOT able to deal with the SATA DVD Burner I have. It is a "Sony Optiarc DVD Burner with LightScribe Black SATA Model AD-7241S-0B LightScribe Support". Is there some special magic I need to do? Here is the relevant bit from the boot up (SATA ports

I've been having an extremely hard time using the on board SATA controller on my nvidia based board. I have two 160gig Maxtor SATA drives attached to the on board controller, setup as software raid0. The problem is the array is extremely unreliable, where I'm getting constant I/O errors like: sd 0:0:0:0: SCSI error: return code = 0x00040000 end_request: I/O error, dev sda, sector

Hi all, my motherboard ma78gm is working. I am trying to get working the esata. I plug in my external driver, power cycle the external drive. then turn on my machine. My drive sda is detect as normal. however I dont see anything about any other disk. dmesg didnt show anything. Is there something special needed to activate the esata drive? Jerry

Hello, I originally posted this to xen-users, but someone suggested I post it here. I am having ACPI problems on a PenguinComputing Altus1600 system. It has 2x dual core Opteron 2210 processors. The system boots with a standard Debian or Ubuntu SMP kernel, with ACPI enabled. However the xen live cd, binary xen install, as well as my own custom compile of xen 3.0.4 from source will not boot.

I am having problems getting my 64-bit Debian Squeeze (Xen version 4.0, Linux Kernel 2.6.32) dom0 to recognize a harddrive connected to a secondary sata controller. My motherboard is a Gigabyte GA-X79-UP4 and has two sata controllers. The first is controlled by an Intel X79 chipset and the second is controlled by a Marvell 88SE9172 chip. During the initial install of Debian everything is fine and

I am trying to get esata working. my lspci is below. When I plug in the disk an turn it on - dmesg reports nothing. Is it supposed to report anything like a usb disk does? Is there a module to load? My motherboard is GA-MA78GM-US2H. Jerry --------- 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge

Hi, Does anybody has any experience with e-sata on CentOS5.2? - How fast is it? Same as an internal sata? - Does it support sata-2? - Does it "hot-plug" like a USB? -- Thanks http://www.911networks.com When the network has to work

Does any one know how to, if at all possible currently, to export a block device via eSATA? i.e. how do I do something like iSCSI, but over eSATA? I have a cheat ($15 probably?) media player at home (Egreat EG-M31B Network Media Tank - awesome little machine) that runs some flavor of Debian and can be connected to any PC via eSATA as an external HDD's. i.e. it exports the built-in HDD as a

HI All, I have a dilemma and I would appreciate advice 1. Get a good size case, mobo, processor, etc and put 8 hard drives it in and RAID them. (yes an 8 port SATA mobo). Running CentOS. or 2. Get an eSATA enclosure that has room for 8 or 10 drives and just connect it to box? I know that RAID is not a full proof backup, but I am looking for a solution to store all of my data, projects, music,

I am trying to get a pv_ops dom0 working for testing, but I am running into an elf_init error: (XEN) *** LOADING DOMAIN 0 *** (XEN) elf_init: not an ELF binary Full output attached. >From what I have read on the mailing lists, it seems that it is usually a problem with either grub or a corrupt dom0 kernel. Attached is my kernel config (2.6.28-rc6-tip). I followed the instructions on:

Hi, I'm looking for SATA controller with a eSATA port that is supported by Centos 4.4 ( rhel 4.4) Do you have any suggestions for a eSATA controller with good Linux support ? How can I list the sata controllers supported by Centos 4.4 ? Thanks JF Leblond Jean-Fran?ois Leblond jfleblond68 at hotmail.com _________________________________________________________________ D?couvrez

Is this possible? I want an external case with 4 HD in, each having an individual eSata cable. I plug in this case only when needed (each HD plugs into my PC separately), and do something like ">import ZFS pool" and use my ZFS raid. When done, I unplug it with ">export ZFS pool" or something similar command. This way I save energy, less noise, etc. I want it only as a