similar to: Sound problems on envidia 6510 in Compaq SR5110NX

Hi all, I've recently upgraded a system from CentOS 4.4 to CentOS5, and now when the system boots, the r8169 ethernet card doesn't come up. After the boot sequence, if I type "ifup eth1 | ifup eth1.10 | ifup eth1.203" then the adapter starts up ok. It seems to be something with the boot sequence it loads the ethernet adapters a different way around (ie 4.4 eth0 is now

Me again. The ASUS P5N32-SLI motherboard in my new machine has dual NICs but CentOS has only detected one of them. I've tried rebooting with the network plugged in only to the second one, but kudzu still doesn't find it. Any suggestions?

I have a bug report in (0002288) on an install failure on my decTOPs (Centos 4.5 installed on them). I have tried a lot of combinations and it is getting tiring. What what happen, or rather how do I get the following to work: Put my HD into a computer (Compaq SSF that I have installed Centos 5 on with no trouble), install Centos 5, move the HD to the decTOP. Different Video card. No PS/2

Hello, I'm currently try to get newhidups running with the newhidups driver from nut 2.0.2. After some USB issues (usb_claim_interface() works only as root so far) newhidups is recognizing the device. Though it doesn't detect any state changes, meaning when I run the battery test mode it's not recognized. I wanted to try the CVS version but it seems anonymous CVS is broken. The

Hi all, I am having problems to get the SeaLevel IO card to work with CentOS distro. Basically the card is being recognised and shown by lspci BUT /proc/devices file is not updated with the new devices does anyone know why. ? Could someone tell me what/where infos are needed to get /proc/devices to be updated. The reason I require the /proc/devices infos is because I want to run a mknod

hey friends, Recently I purchased Compaq Presario SR1722IL and I tried to install Centos 4.0 on it but it started showing errors like: Uniform CD-ROM driver revision: 3.20 Combo SOLTC-4836k ATAPI CD/DVD-ROM drive hdc: IRQ Probe failed (Oxfcfa) hdd: IRQ Probe failed (Oxfcfa) hdc: lost interrupt I tried installing FC4 also but same problem persist. Windows 2000 & Windows XP are

I just bought a new cheap compaq presario sr5010nx and so far have been unable to get my dsl up and running on Centos5. pppoeconf on Ubuntu works just fine -- same machine -- same harddrive. I've run adsl-setup and system-config-network? (separately) numerous times without success. So far I suspect a missing driver but suppose it could also be a detection issue. Suggestions or workarounds

Dear All, I have installed the centOS 4.3 in my laptop. OS is not detected the ethernet card as well as sound card. Pls help me for activating the lan card drivers. regards, Ajay -- Technical Officer Skype ID: erajay; National Internet eXchange of India. STPI (Software Technology Park of India), Ganga Shopping Complex,Sector-29, Noida,U.P. INDIA (M) +91-9868477444(D)+91-120-4318082

Hello all, I'm going to tackle learning C this week, and start writing my first * add-on/contribution; assuming it's actually worthy of contributing once it's done.. I think I've chosen a hefty project for my first go round here... I'd like to get some feedback from everyone on a FindMe/FollowMe spec I've put together. Before you read on, let me say, I don't want

I've got an odd situation that I need some advise on. I have two computers that I am planning to use as a cluster. I initially started with some left over Compaq Presairos with 667MHz CPUs. I loaded CentOS 4.3 and later updated to 4.4. Things ran normally, albeit slowly. I had an opportunity to upgrade to a pair of IBM Netvistas with 2.26 GHz CPUs, I did this by transferring the

I have a Compaq something with a PII-400 and an Intel 440BX/ZX/DX chipset. I put in a Maxtor Ultra133 PCI controller (which is a Promise PDC20269, same as their TX2) and connected the hard drive thereto. Before we go on, I should say that I **hate** both Promise and Compaq. I wouldn't actually BUY this junk. Don't look a gift horse in the mouth, as they say. :) (An old idiom I grew up

Hello, i configured a 2 xen one on a hp with ati video card and one amd with envidia, the xen on nvidia no work the X-server, only a black screen i can see. how i can install a OS from CD-ROM, the menssaje is that not found /bin/ls when i used xen-create-image --hostname prueba --ip 192.168.1.5--copy /mnt/cd -- Juan Carlos Reyes GNU/Linux ID: 305743 Powered by Debian Caracas-Venezuela

I think there are two bugs in aov() that shows up when the right hand side of `formula' contains both `-1' and an Error() term, e.g., aov(y ~ a + b - 1 + Error(c), ...). Without `-1' or `Error()' there is no problem. I've included and example, and the source of aov() with suggested fixes below. The first bug (labeled BUG 1 below) creates an extra, empty stratum inside

I'm running CentOS 4.4 and drbd 0.7 with ext3 filesystems on the drbd device. I'm very interested in moving to drbd 0.8 and pulling my all of my drbd devices into one lvm for greater flexibility in filesystems. I've seen some notes on doing this but wonder if anyone on this list has a cookbook for doing this. Also noted that on the drbd site the only packages they have are set

Hello All. I've got an Asus board with a non-operational nic and sound chip on Centos 4.4. Anyone know if this is possible to get working on 4.4? I've downloaded 5.0 but it looks like others still have issues* with this chipset. Thanks. [*]- http://bugs.centos.org/view.php?id=1989 -- Flambeau Inc. Technology Center - Baraboo, WI Email : tblader at flambeau.com Keyserver:

Hello all, Does anyone know where I could turn to find out how to set up the NVIDIA driver to work properly on my Compaq Presario R3000? Thanks in advance, Phil

greetings does the list at this url cover *all* options or are there some hidden or newer ones by chance? http://www.centos.org/docs/4/html/rhel-ig-x8664-multi-en-4/ap-bootopts.html i am playing with CentOS 4 on some Compaq dual PIII hardware. The first unit is an 1850R with dual 500Mhz. If you need more info please let me know. it is a basic unit with raid controller and a Gig of DRAM etc.

I notice from the hardware compatibility list that the XR model is supported - what are the chances that the older R3000h models are too? Thanks. /Per Jessen, Z?rich

I am trying to install x86_64 on a compaq r4000 laptop. booting the CD I have tried text mode only and graphicaly mode. I see the normal stuff flying by and I just get a black screen (in text for graphic install). I have tried linux acpi=off apci=off nousb nopcmcia linux noprobe all result in the same black screen. Once the screen goes black the CD is still being accessed but the screen is

Jerry Geis wrote: >/ I have tried in the grub.conf file />/ />/ noapic />/ />/ and />/ />/ apic=off />/ />/ I am still getting the same error message about ACPI />/ in the dmesg output. />/ />/ example: />/ ACPI: PCI interupt .... IRQ 16 />/ eth0: RealTek RTL8139 ... IRQ16 />/ eth0: identified 8139 chip type />/ />/ so ACPI is grabbing IRQ