similar to: Help with Dell Latitude, CentOS 5, and intel 3945abg wireless

Hi, I have a laptop DELL M90 with an Intel PRO/Wireless 3945ABG card. After installed new rpm drivers (see below), my card is recognized and I can see my wireless acces point with (iwlist - iwconfig) but it's impossible to connect to it. It seem that I can't obtain an IP address. In the log message I have "dhclient : DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval ) The

Hi, I have a laptop DELL M90 with an Intel PRO/Wireless 3945ABG card. I'm using centOS 5.1 kernel 2.6.18-53 i386. I installed ndiswrapper v 1.52 I installed the driver http://ftp.us.dell.com/network/R164255.EXE The wireless-tools is v 28.2 When I trying to connect to my wireless access point with encryption key disabled everything work fine !!!! When I enabled the encryption key on my

Hello Friends, This is my first post on CentOS mailing list. I am using CentOS since last 3 years and using Linux since 2003. I am Java Based ERP(http://ofbiz.apache.org/) developer and I truly appreciate the stability of CentOS as the Desktop machine for the developers. In the early 2003 I was using CentOS 4 then I moved to CentOS 5 stable release then before 1.5 month I installed CentOS 5.2

Hi, I have a wireless network but no wired network. I need to access the net for the necessary installation of the wireless drivers in CentOS 5.1. Could anyone let me know how i can go about it!! My card is Intel PRO/Wireless 3945 -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I received ? Dell laptop M90. The wifi card is not reconized. (Intel 3945ABG) I'm using CentOS 4.4 - kernel 2.6.9 I saw some solutions on the web but I need to change the kernel. http://ipw3945.sourceforge.net/ Is there a solution to make this card working with the same kernel ? Regards. __________________________ Ce message (et toutes ses pi?ces jointes ?ventuelles) est

I'm having a wireless connection issue with an HP laptop and a Zotac media server after the 6.4 package updates from CR repository. Nothing changed with wireless config as far as I can tell. Both have been working fine with previous releases of 6.x. Oddly, if a cat 5 cable is connected for a few seconds and then disconnected the wireless works fine and survives a 'service network

this seems to be the right firmware https://wireless.wiki.kernel.org/_media/en/users/drivers/iwlwifi-2030-ucode-18.168.6.1.tgz <https://wireless.wiki.kernel.org/_media/en/users/drivers/iwlwifi-2030-ucode-18.168.6.1.tgz> > Am 14.04.2016 um 05:01 schrieb John R Pierce <pierce at hogranch.com>: > > On 4/13/2016 7:42 PM, Philip V wrote: >> lspci gives >> 08:00.0

This is a new Centos 5.1 install on a HP nc2400 (that use to run XP). Completely clean install; blew away the XP partitions... After applying all the updates, and configuring for the rpmforge repo, I used yumex to install dkms and the dkms-ipw3945, ipw3945-firmware, and ipw3945d rpms. lsmod|grep ipw shows: ipw3945 180391 1 ieeee80211 33417 1 ipw3945 and dmesg)grep

Sunday I updated my kernel to 128.1.16 (I had to reboot so it was time to update). No problems with wireless in my home. Monday I started traveling to IEEE 802 plenary, and I have lost my wireless numerous times needing to reboot. The symptom is the radio light goes off. Back before the kernel update, this would happen sometimes at home while on battery, and I would just press the

With CentOS 7.2 a laptop wireless card is recognized in dmesg, but nonfunctional. Toggling the hardware wifi switch causes the Bluetooth icon to appear and disappear. The network configuration window shows the Wireless tab greyed out. Rebooting with the bluetooth enabled does not help. It appears the appropriate driver is iwlwifi, which is what works in Fedora and appears to be available and

Hi John, Thank you, elrepo sounds good to know about -- http://elrepo.org/tiki/About says is an extra repository for hardware support. Still not clear how to troubleshoot the problem so I know what to install from elrepo. I know that a spec file is involved in creating an RPM file; do you mean that you make your own kernel RPM? On Thu, Apr 14, 2016 at 4:05 AM, Andreas Benzler <andreas at

I''m trying to follow Chapter 10 of the howto and apply it to two ubuntu machines each with two 802.11b/g interfaces. However, I cannot get a connection. I would like the 4 interfaces to create 2 ad hoc links on separate channels. I have set this up successfully with the following: /etc/dbus-1/event.d/25NetworkManager stop wlanconfig ath0 destroy wlanconfig ath0 create wlandev wifi0

I have an Everex laptop (ick, but it was super cheap) that has an Atheros wireless NIC in it, but I can't seem to get it to connect to my wireless in-home LAN. Here's what I've done so far (that isn't working) - any suggestions? [root at marktop mark]# lspci | grep Ether 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c) 05:01.0 Ethernet controller:

I rebuilt my notebook that has the atheros card in it, and forgot to save all of my setup to get it working. I am using dkms and the madwifi rpms from rpmforge. My modprobe.conf has a line: alias wifi0 ath_pci I can ifconfig wifi0 up But the command: /usr/sbin/wpa_supplicant wpa_supplicant -dd -D madwifi -i wifi0 -c /etc/wpa_supplicant/wpa_supplicant.conf fails. Now some of my old

On 4/13/2016 7:42 PM, Philip V wrote: > lspci gives > 08:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230 (rev c4) > > 1. How do I get this working? I am happy to work with command line tools. > > 2. Are there other packages I need? I installed wireless-tools, and > tried to fiddle with iwconfig and NetworkManager to no avail. iwconfig > does seem to

I know, I know... don't use the non-standard kernels unless you have to... BUT: I have a D-Link N150 USB card. Bus 001 Device 004: ID 0846:9030 NetGear, Inc. WNA1100 Wireless-N 150 [Atheros AR9271] This isn't supported in C5, but it is supported in newer kernels (ath9k_htc). So let's try NDISwrapper: # rpm -i kmod\-ndiswrapper\-1.56\-1.el5.elrepo.i686.rpm

Hello Philip, In my test cases on Centos 6 or 7 I always run an elrepo kernel or build my own one from rewritten spec file. That helps me out to get Centos work as good it can be. Personal playground, those packages are unsigned!!! http://centos.cms4all.org/centos/7/ <http://centos.cms4all.org/centos/7/> <kernel> noarch git firmware kernel ml aufs - oh I was lazy <gstreamer>

Output of dmesg / messages is found in a previous email (buried in the message thread) https://lists.centos.org/pipermail/centos/2016-April/158703.html Any advice? On Wed, Apr 13, 2016 at 10:42 PM, Philip V <pv.bugzilla+centos at gmail.com> wrote: > With CentOS 7.2 a laptop wireless card is recognized in dmesg, but > nonfunctional. Toggling the hardware wifi switch causes the

ftp ftp.ietf.org cd rfc prompt mget *index* gets part way through then..... local: rfc-index-latest remote: rfc-index-latest 227 Entering Passive Mode (64,170,98,32,156,203) 150 Opening BINARY mode data connection for rfc-index-latest (4042 bytes). *** glibc detected *** ftp: malloc(): memory corruption: 0x091645d0 *** ======= Backtrace: ========= /lib/libc.so.6[0x3c714c]

hi all, this is my first hit on the mailing list. hope i m posting in the right place. well, i have a dell vostro 1510 laptop with broadcom wifi adapter. n it doesnt work! :( i installed the wifi drivers with ndiswrapper. iwconfig shows the following. [root at laptop ~]# iwconfig lo no wireless extensions. eth0 no wireless extensions. sit0 no wireless extensions. wlan0