similar to: Syslinux drive confusion

Hi Some time ago I wrote this mailing list about some extra time that it takes for my system to boot and I don't know where it came from.I'm using a custom BIOS which loads at 1 second and now I've found out that it takes for the bootloader and OS an extra 1 second to load when keyboard is disconnected.I got from the BIOS engineer the following explanation and steps to take: In

Hi, In the Bios folder inside mbr, there are different types of mbr_c.bin mbr_f.bin as well as mbr.bin, is there a description available which tells which mbr is to be used in which case? please point me to the description or kindly explain. while installing syslinux on my device (usb, sd-card) i can use the arguments '-H' and '-S' to specify heads and sectors, these should be the

Hi all, I'm trying to use mboot.c32 to build our Solaris machines but the problem we are getting is the network interface doesn't get configured. It would boot in to the miniroot and then drops in to a shell. At the shell, if I configure the interface via dhcp it would continue on with the jumpstart. This is the first time we are using syslinux (version 4.04) and looking at the

Hi Gene It took me some time to check all the things you've asked. Hope you still remember the case... 1) Compiling SYSLINUX with -j1 didn't help. The first error message I get is about missing header file. I'll try to play a little bit with it to make it compile. 2) The 3-character mode that the version/copyright banner displays is EDD. What determines the it? BIOS? What affect

Hi On Mon, May 19, 2014 at 6:58 PM, Gene Cumm <gene.cumm at gmail.com> wrote: > On May 19, 2014 5:17 PM, "Anatol Pomozov" <anatol.pomozov at gmail.com> wrote: > >> Besides syslinux itself other things has changed e.g. gcc (but I >> really hope my problem not because of compiler). > > This alone can be the trigger.This might be a starting point: build

On Mon, Oct 05, 2015 at 08:36:17PM +0000, Tal Lubko via Syslinux wrote: > Hi > Some time ago I wrote this mailing list about some extra time that it > takes for my system to boot And meanwhile there where many, many e-mail on this mailinglist. So thank you for bringing another (good) reason to reply _below_ the text. > and I don't know where it came from. Yes, please elaborate.

> ----- Original Message ----- > From: Gene Cumm <gene.cumm at gmail.com> > To: Tal Lubko <tallubko at yahoo.com> > Cc: For discussion of Syslinux and tftp-hpa <syslinux at zytor.com>; Geert Stappers <stappers at stappers.nl> > Sent: Tuesday, October 6, 2015 1:15 PM > Subject: Re: [syslinux] Measuring boot time > > On Mon, Oct 5, 2015 at 5:08 PM,

Hi On Tue, May 20, 2014 at 3:12 AM, Gene Cumm <gene.cumm at gmail.com> wrote: > On May 20, 2014 12:33 AM, "Anatol Pomozov" <anatol.pomozov at gmail.com> wrote: >> >> Hi >> >> On Mon, May 19, 2014 at 6:58 PM, Gene Cumm <gene.cumm at gmail.com> wrote: >> > On May 19, 2014 5:17 PM, "Anatol Pomozov" <anatol.pomozov at

Hi Is there a phone comparison matrix I could consult I have a series of features that I would like to evaluate on the most common phones on the market example: dual-ethernet POE / direct power / both number of lines speed dials programmable buttons BLF LEDS Headset plug conference call built in hands free operation display size codecs communication protocol (SIP, h.323) price availability

From: Jean-Christian de Rivaz <jc at eclis.ch> I suspect that some instructions about how to use the diag/mbr was not updated when the source file was renamed to handoff.S. Here is a simple proposition to fix that. Jean-Christian de Rivaz --- diag/mbr/README | 4 ++-- diag/mbr/handoff.S | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/diag/mbr/README

Hi, The internal Gnu-EFI build gives me grief: * efi/check-gnu-efi.sh: uses realpath, which is not available on my Debian wheezy system. I now use readlink -f, but wonder if it's needed at all. * efi/build-gnu-efi.sh: uses realpath, like above, and also pushd/popd, which is not built into a standard Bourne shell invoked by #!/bin/sh. Again I wonder what's the point of it, as

I''m new to Rails (and liking it!) and I have multiple controllers, each of which has a method which uses a view template which is identical to what the others use. I would like to be able to have just one template to maintain that they can all use. What is the customary way to do this? I tried using render_action to specify the template explicitly, and it "works". But I

I'm trying to come to a decision between CentOS 4.2 and Fedora Core 4 for use on a server. One of the things the server will be serving is X desktops so there are some advantages to Fedora. However, one thing I can't help but notice is that the patch volume for FC4 from Oct 11 2005 thru the present compared to CentOS 4.2 for the same period is about 5 times greater. In fact, since

On Thu, Feb 2, 2017 at 4:43 PM, Phil Turmel <philip at turmel.org> wrote: > On 02/01/2017 10:40 AM, Phil Turmel wrote: >> Hi All, >> >> I've been running Gentoo on a ZBook with great success for a couple years, >> but I've been stymied in my attempts to implement SecureBoot by an >> apparent problem with efifb to nouveaufb handoff, but only when

On Fri, Jan 10, 2014 at 2:53 AM, Ferenc Wagner <wferi at niif.hu> wrote: > Gene Cumm <gene.cumm at gmail.com> writes: > >> On Sat, Jan 4, 2014 at 6:39 AM, Gene Cumm <gene.cumm at gmail.com> wrote: >>> On Tue, Dec 17, 2013 at 8:39 AM, Ferenc Wagner <wferi at niif.hu> wrote: >>> >>>> * make spotless still fails after working around

Hi, I had a problem trying to migrate domains, in trying to locate it I noticed that saving domains doesn''t work either, which I believe explains why the receiving xfrd doesn''t actually receive anything. So here it goes... xenone:/tmp# xm list Name Id Mem(MB) CPU State Time(s) Console Domain-0 0 123 0 r---- 900.6 sky 9

Hi, Does anyone know how to correctly configure RadRails (0.7)? I can''t seem to get 0.7 version of radrails to create a Rails project. All I get is a blank project. I have ensured that my PATH does point to my ruby\bin area. Also any clarification regarding which directory (with an example) should be used for the following preferences setting (are they asking for a file or

Is ROR a good fit if I want to edit and expand on a developed script like RoundCube( http://roundcube.net/ )? I''m planing to edit it for my business as an order/transcript application. If anyone is interested this link is what I want to make. http://handoff.wordpress.com/

Hi I have a new ASUS A6Tc laptop with 1.6 GHz AMD Turion dual core processor. I get a strange error: <4>0000:00:0b.0 OHCI: BIOS handoff failed (BIOS bug ?) 000007b4 <4>0000:00:0b.1 EHCI: BIOS handoff failed (BIOS bug ?) 01010001 This only occurs when booting into the xen kernel, not without xen. Can someone tell me why and how it can be fixed? Art

Hello, I want to model my data with the following model: Y1=X1*coef1+X2*coef2 Y2=X1*coef2+X2*coef3 Note: coef2 appears in both lines Xi, Yi is input versus output data respectively How can I do this in R? I got this far: lm(Y1~X1+X2,mydata) now how do I add the second line of the model including the cross dependency? Your help is greatly appreciated! Cheers, Bastiaan