similar to: Virtual Networking

Hi guys, I have started preparing a library of PV-HVM templates for use on Xen 4.X+ and PVOPS dom0. This was brought up late last year as something that would make Xen alot easier for beginners to try. They are also great for testing - I will be setting up some stuff to do automatic testing of distro kernel compatibility against xen-unstable. Mirror page is here:

Hey, On Mon, Feb 27, 2012 at 10:26 PM, Linus van Geuns <linus@vangeuns.name> wrote: > Hey, > > I am currently considering a two machine Xen setup based on AMD Opterons, > more precisely Dell R515s or R415s with dual Opteron 4274HE. > Does anyone has some Xen setup(s) running on top of Opterons 4274HE, Opteron > 4200 or Dell R515 machines and is willing to share some

Hello, I have been playing with the XCP for a while now, and must say I''m very exited about the technology. I had no prior experience with Xen so it has taken me a while to understand the concepts, but now I feel most important issues are solved and I''ve purchased some hardware to build my (tiny) cloud on. The box is a Supermicro 1026TT-IBXF, so I have 2 x Ethernet and 1 x

Hi, In XenServer5.6 FP1 beta, I have switched default bridge to open vswitch, I wonder how to use "xe tunnel-create" to create a GRE tunnel. my commands: xe tunnel-create pif-uuid=eth0_uuid network-uuid=network_created_by_xe_network_create then I got an uuid which is "access-PIF" of output from "xe tunnel-list". what should I do next? how to set remote_ip

Hallo, I have an installed Windows 7 on one partition and running Debain Squeeze on the other. Both are 64 bit. I want to use Xen to run Windows as virtual guest from a physical disk. Once I get this working the Window will never be booted directly. When I try to create the virtual machine by "xm create -c win.xen" it hangs. The versions I use Xen 4.0.1-4 Kernel 2.6.32-5-xen-amd64

Hi, I want to combine all the above mentioned technologies. The Linbit pages warn not to use the drbd: VBD with HVM DomUs. This page however: http://publications.jbfavre.org/virtualisation/cluster-xen-corosync-pacemaker-drbd-ocfs2.en (thank you Jean), simply puts two DRBD devices in dual primary mode and starts Xen DomUs while pointing to the DRBD devices with phy: in the DomU config files.

Dear List, I have problems using Xen dom0 Kernel including the IMA Kernel Module (Linux Integrity Measurement - http://linux-ima.sourceforge.net/) The IMA supports only kernel > 2.6.32 and I dont know how to find and build a Xen dom0 kernel in version greater or equal than 2.6.32. There is just kernel 2.6.18-xen in the Mercurial repository which is normally used during the standard

Dear List, I have problems using Xen dom0 Kernel including the IMA Kernel Module (Linux Integrity Measurement - http://linux-ima.sourceforge.net/) The IMA supports only kernel > 2.6.32 and I dont know how to find and build a Xen dom0 kernel in version greater or equal than 2.6.32. There is just kernel 2.6.18-xen in the Mercurial repository which is normally used during the standard

Hi *, having built Xen 4.1.0 and running my Dom0 on Slackware 13.1, I''m trying to assign different physical network interfaces to different DomU guests: vif = [ ''bridge=ethX'' ] in the DomU configuration files. My /etc/xen/scripts/network-bridge script, however, doesn''t create more than one bridge: root@cen:~# /etc/xen/scripts/network-bridge start

Hello everyone, I''m quite a newbie with Xen and I''m currently having an issue. I run Xen 4 on Debian Squeeze x64 and I''m trying to build an OpenFiler DomU from the Xen domU filesystem tarbal they provide (See http://www.openfiler.com/community/download/). I downloaded the tarball and run ''tar xzpvf /root/soft/openfiler-2.3-x86_64.tar.gz'' to extract

Hey guys, I have a OCFS2 Cluster mounted at 4 xen-server (gentoo). Today I upgraded the xen-kernel for tests at one server (server2) from 2.6.34-xen to 2.6.38-xen-r1. After reboot the server couldn''t mount the ocsfs2 device anymore. ocfs2-tools version: sys-fs/ocfs2-tools-1.4.3 Modules are loaded and /config type configfs and /dlm type ocfs2_dlmfs are mounted. server2 ~ # mount

Hello, I am currently trying to move my VMs from running on local host storage to a shared storage (trying out iSCSI) but I am facing a bit of a booting dilemma. The domUs are a mix of paravirtualized and fully-virtualized VMs. They all boot and run like clockwork when on local storage. The paravirtualized domUs appear not to have a problem when I relocate and boot them from the shared storage

Hey all, I was watching some logs on a domU today and i suddenly noticed that the timestamps were off by something on the order of 47 seconds. I was surprised because *I don''t* run independent wall clocks. I checked some other domUs and the "drift" was also very close to that of the first domU. I also checked another dom0, Here the domUs were "only" out of sync by

Hallo Mailinglist:), i used xen 4.1 with xend xm a while. I compiled the unstable 4.2 today and most thinks run fine :). I have only one big problem, the network for my guestsystems. It don't want to work. Hopefully somebody can help me. In Xen 4.1 i only wrote the following line in my questconfig: vif = [ "bridge=eth0,script=vif-bridge" ] And everything works fine. This does not

Hello, I am using XCP 1.0 and am accessing it with XenCenter. I have three NIC''s and I have bonded two of them through the XenCenter frontend. I then create a VLAN using XenCenter and attach it to the bond0. I create a VM and create its NIC to use VLAN 10, which it does and when the VM boots the NIC shows Active inside of XenCenter. When I look at the XCP host it shows VLAN 10 as an

Package: xcp-xapi Version: 1.3.2-6 Severity: minor Tags: upstream If xe pif-configure-ip called twice with different IP, it did not remove old IP from interface (but didn't store both addresses in database). (Checked for management interface) Steps to reproduce: xe pif-reconfigure-ip uuid=... ip=IP1 .... xe pif-reconfigure-ip uuid=(same) ip=IP2 ... 'ip addr show' shows both

Hello Everyone, I am new with XCP. I''ve setup several hosts with* XCP 1.0* and manage it through XenCenter and command console. Each host has two NICs, one (xenbr0) connected to a physical switch for Internet (said sw1), the other (xenbr3) connected to a physical switch for internal network (said sw2). I am trying to setup VMs and VLANs on xenbr3. I created a virtual bridge by

Package: xcp-xapi Version: 1.3.2-13 Severity: critical I get this bug when installing XCP and configuring the network portion of it. When I issue the following command: xe pif-reconfigure-ip uuid=$PIF_UUID mode=static IP=10.0.0.10 netmask=255.255.255.240 gateway=10.0.0.1 DNS=10.5.1.2,10.5.1.3 My network interface looks like this (Broken): eth2 Link encap:Ethernet HWaddr 00:50:ec:24:c7:43

Hi, i already tried to ask this and did not obtain any answer. Is remus is supported in Opensuse Linux actually ? Regards _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hi all, I can''t find any good talk about this subject and would like some insights and advices on the cache side in xen. I discovered that a domO power outage can lead to a severe filesystem corruption of the domUs. The domO is a dual disk dell server with a PERC controler in writethrough cache mode, the disk cache is disabled, the scheduler in the domO/domU is NOOP, the domO is holding