similar to: PCI USB Passthrough on Kernel 3.5 and 3.6 not working (HVM or PVM)

Hi list, I recently installed the Trixbox distribution as an HVM and have now converted it to a PVM. Found very few resources on Internet where people had done this conversion so I had very little to compare with. Wanted to ask for comments about the kernel used in the PVM after the conversion. Installing Trixbox and later installing the xenified kernel, gives a kernel of 2.6.18-92..... In my

Hi, Not trying to be obnoxious on this list. I thought perhaps phrasing the subject line specific will catch some ones eye (hopefully). Would like some help on 2 issues. 1 - I have PCI pass through working for an Nvidia card which is my 2nd graphics adapter and I wish to dedicate it to a particular domU. I had to mod my initrd as follows; mkinitrd -f --preload=pciback

I am using xencenter to connect to my ubuntu 12.04 xen box If i create a PVM with a template, everything works great if i create a HVM with the custom template, the console does not respond to keyboard or mouse clicks? any ideas what could be the problem? _______________________________________________ Xen-users mailing list Xen-users@lists.xen.org http://lists.xen.org/xen-users

more details: Physical machine: cpu-I5 3.1G, RAM 16G -- View this message in context: http://xen.1045712.n5.nabble.com/Performance-of-PVM-and-HVM-tp5711212p5711286.html Sent from the Xen - User mailing list archive at Nabble.com.

no one care about this -- View this message in context: http://xen.1045712.n5.nabble.com/Performance-of-PVM-and-HVM-tp5711212p5711304.html Sent from the Xen - User mailing list archive at Nabble.com.

Hello R enthusiasts, I am working with a Fedora Core 6 OS and R 2.5. I have just finished loading PVM on my test cluster and this is working properly. Also, rpvm has been loaded in R. However, when I try to load my test program, I receive this error: Loading required package: rpvm Error in dyn.load(x, as.logical(local), as.logical(now)) ; unable to load shared library

Thanks you all guys. I am able to create the RHEL5 PVM on RHEL5 host successfully. Only thing that i need to add is /mnt/etc/fstab in inintrd command and preload to both the fronthend drivers. As blow. # mount /home/disk /mnt # mkinirtd /boot//boot/initrd-2.6.18-8.el5xenU.img 2.6.18-8.el5xen --fstab /mnt/ etc/fstab --with xenblk --with xennet --preload xenblk --preload xennet Thanks a lot,

(My apologies if this is the wrong list or if this question has been asked before. I’ve done quite a bit of searching and can’t find an answer) I am working on a heavily modified version of CentOS with a user-land that mostly matches 5.4 and a kernel based on 6.2. I''ve found tutorials on how to create a CentOS PVM (such as http://wiki.centos.org/HowTos/Xen/InstallingCentOSDomU) but I

What is the best practice in creating PVm domU''s - with or without swap? >From the admin point of view, especially in HA environment it is temptating not to have a seperate swap partition. Could it be performance issue if swapping to swap-file insted of swap-partition? What about pure swapless- no swapfile, no swap-partition? Any expirence out there? regards Longina -- --

Hi, I tell you my problem: I've installed a Ubuntu's HVM guest in CentOS with XEN, then I convert my HVM to PVM based in this tutto : http://www.asplund.nu/xencluster/xen-convert-hvm-to-pvm.html After this modification everythings it runs fine but I have a problem with xconsole, I don't see anything when I run the command "xm console ID" , I only see the boot proccess and the

I''m trying to do nested XEN to give some of my colleagues a play area to work in, and it seems to work - but not quite. I can build the nested environment (using OVM, and I have to step back to OVM3.2.2 to allow me to do PCI passthrough), but as soon as I start up a VM with a phys device passed through, the first layer loses all connectivity to the SAN. Setup: * 2 UCS

The Real Problem is discussed at the bottom of this message: On Tue, Dec 11, 2012 at 11:38 AM, Ian Campbell <Ian.Campbell@citrix.com> wrote: > On Tue, 2012-12-11 at 16:30 +0000, Terry Phelps wrote: >> I am trying to develop a procedure for backup and restore of a Xen >> PVM. I am having a problem with booting the restored machine. I''ll >> tell you the symptom,

Hi All - I'm running a faily long script that uses rpvm & snowFT to spawn off multiple processes with the 'clusterApplyFT' function. Specifically, what happens is that the head node generates a number of seed clusters that are then spawned off to the pvm cluster (in this case, nodes on a 4 dual-core machine) using clusterApplyFT to apply a function to each seed cluster that

Hi: Reading Red Hat's Website and a printed manual of RH184 (Red Hat Virtualization course) I see that RHEL 5 only supports RHEL 4.5 and RHEL 5 as paravirtualized guests. So I asume this is the same situation for CentOS 5, right? What's the dependency between Xen versions for paravirtualized guests? I ask this questions because I got this experiences: 1. Running CentOS 5 as Dom0 - RHEL

Hi, Is there any way to add VNIC to the domU? # virsh attach-interface mydomU network myvnic1 # libvir: XML error : missing source information for device myvnic1 It''s SXCE105. -- Regards, Piotr Jasiukajtis | estibi | SCA OS0072 http://estseg.blogspot.com

Hi all. I have a problem with pciback in OpenSUSE using PVM. I try to send 3 nic for the PVM.. its ok.. but.. if i try ifconfig eth3 up.. got the error... Please.. see this. Anybody.. know this problem? Thanks, Junior opensuse:~ # uptime 3:36pm up 0:03, 2 users, load average: 0.02, 0.06, 0.02 opensuse:~ # uname -a Linux opensuse 2.6.27.7-9-xen #1 SMP 2008-12-04 18:10:04 +0100 x86_64

Hi, I am using xen 3.1.0 on opensuse 10.3, for more details see below. When I try to start the third domU, then this will not work, I get the error: Error: Boot loader didn''t return any data! When I shutdown an other one, I can successfully start the machine that failed, see my log below. The xen configuration files are all similar to this one: name="FTP"

I''ve been looking for a solution that doesn''t involve dual booting, or chrooting things to get my x86 domU to work. I have a Debian xen server on an amd64 platform. It would seem that I should be able to also install or force the install of a non-xen i486 kernel. When I recieved this server it had a manufacturer''s install of Etch with an i486 kernel. Once I have both

I''m going to set up a PVM on xen-3.3.1 debian-amd64. I need advices about the best methods to install a fresh debian on it (i.e. how to choose the kernel for pvm) . I''ve installed xen from sources and only have one xen kernel in /boot which I''m using for dom0; should I use the same kernel for domUs? There is any problem on use vcpus=2; the other vm is an hvm running

Hi, everyone! I am working on xen-4.2.0 with spice remote connect. My host is Fedora 14 and guest is win7. I have installed spice package and now I can connect to guest by spice client. For better graphics experience, I want to try the VGA passthrough. With spice tool, I have to create a VM by xl command, and now I am wondering if it supports VGA passghrouth? If so, how should I test it ?