similar to: [PATCH 3/5] RTC: Add UIP(update in progress) check logic

Finally I got around to breaking up the similarly named monolithic patch that caused a regression shortly before the 4.2 release and got therefore reverted. This series consists of the broken up pieces that - according to my testing - don''t expose the reported lockup; the 7th will need debugging to understand what''s wrong there. 1: use RTC_* names instead of literal numbers 2:

Dear all: I have found a big bug on xen concerning time virtualization. Please let me show you the whole process: 1 Phenomenon when I run a JVM based program in IE browser in my Virtual Machine, I have found clearly that time at the right bottom corner in my VM gets more slower and slower. I studied the bug deeply, and found something below. 2 Xen vmx_vmexit_handler --> ......... -->

Hi, I'm new to asterisk, and have a uniden UIP 200 that I got off of ebay. I'm having trouble getting the phone to register with asterisk. I've tried a few different settings. I'd be extremely grateful if someone with a similar setting could give me the sip.conf block for the UIP and the settings you're using in uniden.txt. Here's what I have currently: IP of phone

No kidding, every time. I know I have the config via tftp working. Funny story - I was getting nowhere with it and then decided to tcpdump on the tftpd box, and wow! The UIP-200 tftp client was looking for the uniden<mac>.txt in lower-case! Hah! That was easy to fix. Now the config is transferred to the UIP-200 at startup. It registers to the * server. The phone displays time and

I had a working system using * 1.0 and then 1.2 and now Asterisk 1.4.13 with addons 1.4.4, zaptel 1.4.6, libpri 1.4.2. I have a mix of Grandstream (GXP2000), Uniden uip-200, Linksys Wireless G, and analog phones via Adtran chan bank. When I went to * 1.4.13, the Uniden phones stopped being able to login to voicemail. All phones are on same lan with Asterisk. I get 'Login incorrect'

Does anyone know how (if possible) to do three way calling on the UIP-200? There doesn't seem to be much info about this phone, but all the feature lists I've read says it can do conference calls. I can't seem to do it, though. Any help would be appreciated. -- Seth "et lux in tenebris lucet" Mattinen sethm@rollernet.us

Hi - I'm wondering if any has experience with the Uniden UIP-200 phones. The product info says that the 8 led buttons at the top are all programmable. Can they be programmed as separate line appearances (ala Snom 200, Cisco 7960, Zultys Zip4x4, etc)? In other words - is the phone capable of multiple SIP registrations? Also, the post about these phones at voip-info.org mentions some

I have a UIP200 on the way for eval. Does anyone have tips or tricks to get it working right away with * ? I hate having to go through the pain someone else braver than I went through already. :) Tim --

I am looking for a large number (probably about 100 or so) low-cost phones that I can hang on the wall. I need the phones to use PoE. Do the Uniden phones support wall-mounting? These phones are not going to be high-usage; they simply need to be there in case of an emergency. Another question, along the same kind of lines, has anyone figured out how to keep the SoundPoint IP 600 receiver

I just got my wife this phone, and when calls come in on the queue it will not ring, if I dial the ext it rings, here is the config from the tftp server: Thanks unidencom.txt # UIP200 Mass Configuration System Generic File # Notes: # 1. Lines start with '#' are comments # 2. To leave a field value unchanged (as saved on local phone), leave value to blank. # 3. To set a field's

The piece of plastic is built in to the IP600. Use a screwdriver or something similar and push the little piece of plastic out from the top inside the cradle. It will pop out, and you can turn it over and reinsert it upside down to hold the receiver in place. ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On

I have several too and I also see this problem on occasion. Like you say, it is fairly rare and I can't pinpoint a cause or tell if it is a symptom of something else. I think I wrote to tech support about it but never heard anything. I'm wondering how long they will continue to support the phone. -Nate > -----Original Message----- > From: Jerry Geis

This patch series makes suspend support in qemu alot more useful. Right now the guest can put itself into s3, but qemu will wakeup the guest instantly. With this patch series applied the guest will stay suspended instead and there are a few events which can kick the guest out of suspend state: A monitor command, ps/2 input, serial input, rtc. Not much yet, but it''s a start with the

I just purchased 30 of these after testing one for a few months and would like to quickly purchase another 40. We really like these phones: good sound quality, good echo control (no echo in speaker phone), power over ethernet support, 10/100 switch, 8 programmable keys. Unfortunately we missed on big problem with Call waiting in our testing. When using asterisk 0.9.1 or rc2 the phone will reboot

Just wondering.. Any experience with the UIP1868 ? I assume that it can handle a single SIP line (can't seem to find the manual at their site :-).. They mention also T38 in their webpage.

These are the three cheap SIP phones that I've used. Grandstream BT10x $65/street Number only LCD Zultys ZIP 2 $100/retail No LCD Uniden UIP 200 $120/retail PoE, built-in switch -- Eric Wieling * BTEL Consulting * 504-899-1387 x2111 "In a related story, the IRS has recently ruled that the cost of Windows upgrades can NOT be deducted as a gambling loss."

Does any body know an IP phone that has at least 2 line appearances, POE, is around $150 USD, and works nice with *. I've been looking at the UIP 200 but it's only a single line phone, and I'm looking for something that has at least 2.

Hi All, Newbie question for you all but i have been looking at the archieves and the help dtuff to get a rough idea of what i want to do I would like to merge two dataframes together based on a keyed variable in one dataframe linking to the other dataframe. Only some of the cases will match but i would like to keep the others as well. My dataframes have 67 and 28 cases respectively and i would

I just spent the last hour or so trying to get this firmware to work across a NAT with no success. I have a GS BT101 working through the same NAT, so I don't think it's the NAT itself. I have a STUN setup in * and pointed the UIP200 to it and I tryed several combinations of nat= in the sip.conf and in the config files for this phone. No luck(yes, I did a reload now with each change in

Well, I just keep coming back for more <g> Here's one for ya: how much CPU should icecast2 consume? Its been sitting on the server for a while now, and its running full CPU. I recently restarted it, thinking it might have had a problem with me connecting/disconnecting the source a bit, and it shot right back uip once it was reloaded. here's what top currently shows it as. Also for