similar to: Reboots and Panics(4.1.2/4.2-unstable)

Hi, I am new to Xen and I was wondering if the following construction would be feasible with the current Xen. I would like to put 2/3/4 new computers in my house, mainly for gaming. Instead of buying 2/3/4 different computers, I was thinking of building one computer with a 4/6/8-core CPU, 2/3/4 GPUs, 2/3/4 small SSDs, and attach 2/3/4 monitors to it, 2/3/4 keyboards and 2/3/4 mouses, and run VGA

Hi everyone since I''m currently migrating from xm to xl and now are also a victim of the said error, I started researching on it and found that many people had the issue but not many found solution and behind this BSOD (=Bluescreen of Death), there are actually multiple errors in hiding. What I would like to do is gather as much info as possible in this thread to form a kind of

Hi Folks: I run into a problem when enabling Xen in next generation server platforms with Xen c/s is 21380. Xen reported "CPU Not responding" when booting up 32 CPUs( 2 sockets with 8 cores/16threads total). The log files belonging showed something wrong with APCI. So I added x2apic=0 in the xen grub line, but the symptom remained. However, Native RHEL5.5 can

x86:x2apic: Disable x2apic on x86-32 permanently x2apic initialization on x86_32 uses vcpu pointer before it is initialized. As x2apic is unlikely to be used on x86_32, this patch disables x2apic permanently on x86_32. It also asserts the sanity of vcpu pointer before dereference to prevent further misuse. Signed-off-by: Fengzhe Zhang <fengzhe.zhang@intel.com> diff -r 02c0af2bf280

On Thu, 2014-05-15 at 11:01 +0100, Ian Campbell wrote: > Please can you also post Xen's own dmesg (from "xl dmesg"). Please boot with loglvl=all on the hypervisor command line for this too. Ian.

Ian Campbell <ijc at hellion.org.uk> writes: #Please boot with loglvl=all on the hypervisor command line for this too. No problem Ian, Here are some results with (now) the latest BIOS version 41. (was version 35) This is a fresh new install of Debian "Testing" non production server. Just wanted to run some test domU's. Changing USB ports, no effect. I even tried a different

Hi, on a Nehalem system with VT-d enabled we are seeing strange ACPI-Table contents, especially a corrupted DMAR entry. The hypervisor shows following data on boot: (XEN) ACPI: RSDP 000F80E0, 0024 (r2 PTLTD ) (XEN) ACPI: XSDT BF7C469E, 00D4 (r1 PTLTD XSDT 60000 LTP 0) (XEN) ACPI: FACP BF7C9CC9, 00F4 (r3 FSC TYLERBRG 60000 PTL F4240) (XEN) ACPI: DSDT BF7C4772, 54D3 (r1

I am considering buying a small, and therefore easily portable, computer as an alternative to the laptop I already have. Obviously it would not have battery, a screen, nor a keyboard etc. but more or less be an easily portable computing unit to move between offices where a keyboard and monitor(s) could then be connected. I want to run CentOS 7, later CentOS 8. The smaller, the better, however,

Please consider this patch to allow x2apic without IR support when running on VMware platform. Tested on top of 3.8-rc3. Thanks, Alok -- Allow x2apic without IR on VMware platform. From: Alok N Kataria <akataria at vmware.com> This patch updates x2apic initializaition code to allow x2apic on VMware platform even without interrupt remapping support. The hypervisor_x2apic_available hook

Please consider this patch to allow x2apic without IR support when running on VMware platform. Tested on top of 3.8-rc3. Thanks, Alok -- Allow x2apic without IR on VMware platform. From: Alok N Kataria <akataria at vmware.com> This patch updates x2apic initializaition code to allow x2apic on VMware platform even without interrupt remapping support. The hypervisor_x2apic_available hook

This is my first time posting to the mailing list, so I hope I post everything that is needed. I built a new computer to play around with VGA Passthrough and I got it working. The wiki ( http://wiki.xen.org/wiki/Xen_VGA_Passthrough_Tested_Adapters) said post details here. The computer: Motherboard: ASRock 890FX Deluxe5 CPU: AMD Phenom(tm) II X6 1090T Processor Kernel: 3.0.6-gentoo (pvops) Xen:

Hi folks, I am able to install workstation successfully on a dedicated SSD w/ GPT partition w/ UEFI boot using the latest `CentOS-8.2.2004-x86_64-dvd1.iso` from a bootable pen drive. The motherboard is ASRock x570 Gaming 4 ( https://www.asrock.com/mb/AMD/X570%20phantom%20Gaming%204/index.asp) w/ Ryzen 3600, 16G RAM, 1TB SSD in question. However, after login, when I do a DNF update (which is

On platforms which supports x2APIC, the patches enable this enhancement for Xen. The x2APIC specification is available at http://www.intel.com/products/processor/manuals/ http://download.intel.com/design/processor/specupdt/318148.pdf apicid_u8_2_u32.patch: changes the ''apicid'' from u8 to u32; x2apic.patch: replaces the traditional MMIO-style interface to the MSR-style one; uses

Hi Folks, CentOS 5.5 x86_64 Asrock-Board with 2 USB3 plugs. Normally USB3-drive is detected. But occasionaly after "umount" next time this drive or other ones will not be detected. I have to boot the PC - than it works - till next unrecognition. On USB2 plugs all works correct. No messages in /var/log/messages nor dmesg. What happens here? Board failure - or other reasons? Some

Hello, I have the subject mentioned mb and I am trying to install centos 4.4 with sata raid enabled, but linux is not seeing the drives? I tried to load via sata raid driver, no luck there. I guess I could try legacy mode in the bios, but I was hoping there is another way around to load linux with the raid? Thanks....

Another NUC alternative: https://www.gigabyte.com/uk/Mini-PcBarebone On 2019-07-10 12:14, Mike wrote: > https://www.asrock.com/nettop/index.asp > > Asrock has a series of Intel and/or AMD based mini-pc's called the > DeskMini. > Competes in the Intel NUC space. > Plenty of power and up-to-date components, multiple ports for dual > monitor and at least two ssd's,

I recently purchased a set of ASRock Intel i5 MB/CPU combos for a budget compute cluster. Every time we load up a system and try to boot with a recent EL6/64 ISO, we get a message that reads: > This hardware (or a combination thereof) is not supported by CentOS. For more > information on supported hardware, plesae refer to http://www.centos.org/hardware Not only does the hardware

Hi, All the reviews for the AMD 890fx chipset reported that it supports IOMMU v1.2. But I cannot find any mention of that on AMD site. Does 890fx support IOMMU? Do 890fx motherboards with IOMMU exist? Does Xen support 890fx? Regards, Leonardo _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel

http://www.intel.com/content/www/us/en/chipsets/5520-and-5500-chipset-ioh-specification-update.html Stepping B-3 has two errata (#47 and #53) related to Interrupt remapping, to which the workaround is for the BIOS to completely disable interrupt remapping. These errata are fixed in stepping C-2. Unfortunately this chipset is very common and many BIOSes are not disabling remapping. We can

Hello, I'm facing issues with a Point of View GT210/218 and nouveau drivers. I'm using ubuntu server with LXDE on top of it... *lshw -c video* output: *-display description: VGA compatible controller product: GT218 [GeForce 210] vendor: NVIDIA Corporation physical id: 0 bus info: pci at 0000:01:00.0 version: a2 width: 64 bits clock: