similar to: Available PCIe lanes for VGA passthrough

Hello, I am trying to pass my LSI SAS 2008 controller to my PV domu (openindiana) and I can not get it working. I have read that xen does not support the loading of option ROM''s in pv domu''s and that this support is being, or will be, added. http://markmail.org/thread/2njw43iaurmvzlys This post is more than a year old now. I am wondering if there is a way to get my LSI SAS

Hi everyone, I would like to ask what the current status of FLR, or better of FLR emulation is in latest Xen and if we can expect better support in the future. I''m asking because with xl (latest build and traditional qemu, not upstream), I always had problems with rebooting domUs which have vga cards passed through to them, because appearently they don''t get reinitialized and

Hi there, I have a question regarding PCI passthrough on the Citrix XenServer 5.6 (Xen 3.4.2). I already managed to get some soundcard passed through to a Windows guest. So I think my knowledge about that topic isn''t _that_ low. But I cannot seem to pass through a SATA/PATA controller to a Linux guest. I have some additional CD/DVD burner (PATA) attached to a SATA/PATA controller

Hello all, I''m trying to pass my PCI device through to an HVM. I''m following the steps on the xen pci passthrough wiki. First I check my pci devices #lspci - 03:00.0 VGA compatible controller: ATI Technologies Inc Device 671d 03:00.1 Audio device: ATI Technologies Inc Device aa80 04:00.0 Display controller: ATI Technologies Inc Device 671d 04:00.1 Audio device: ATI

Hello, I am desperately trying to get pci-passthrough to working. I want to pass a tg3 nic to domU. when booting domU I get a lot of messages: pcifront pci-0: pciback not responding!!! in domU, "ifconfig eth... adress up" hangs for 2 minutes, finally ifconfig -a shows a correct setting with no data transmitted rx/tx The IP Adress is being assigned, but there is no data transmission

Hi! we have two Intel Quad Nic 82576, PCI ID 8086:10E8 and use the igb driver 1.3.19.3 on Debian 5.0.1. I used the pciback.hide XEN kernel parameter and made on of the NIC''s interfaces available in a DomU. Now, when I am starting the VM, the system crashes (log attached) I also tried to boot with the irqpoll option - the Interrupt Disabled message still appears when I try to start the

I''m using Xen 4.3, installed from source on Ubuntu 13.04. I''ve successfully installed a Windows 8 guest, and had Xen pass it an AMD FirePro W7000 GPU (technically 2 PCI devices - the second is for the sound), as well as the virtualised graphics adapter. Windows finds the card fine, and I''ve installed AMD''s drivers. Device Manager says that the card cannot

Hello, Which linux kernel is best suited for the dom0? According to this http://wiki.xen.org/wiki/XenKernelFeatures, linux 3.1.0 is the latest version supported, but this page was last updated Oct 2011. Thanks _______________________________________________ Xen-users mailing list Xen-users@lists.xen.org http://lists.xen.org/xen-users

Hello, I´m trying to map one network interface of a Dual-Port e1000 Server Adapter to a DomU (firewall). In Dom0 the adaper is seen with lspci as: 06:00.0 Ethernet controller: Intel Corporation 631xESB/632xESB DPT LAN Controller Copper (rev 01) 06:00.1 Ethernet controller: Intel Corporation 631xESB/632xESB DPT LAN Controller Copper (rev 01) My goal is to map only 06:00.1 to DomU so I used this

Hello, I''m having problems with VTD on this board. The board/cpu/bios all support vt-d and I think maybe I''m just missing something? Any feedback would be much appreciated :) Output below: root@vm:~# xm create /etc/xen/vm-nine.cfg Using config file "/etc/xen/vm-nine.cfg". Error: Failed to assign device to IOMMU (0000:05:00.0@100,msitranslate=1,power_mgmt=0)

Hello, I''m having problems with VTD on this board. The board/cpu/bios all support vt-d and I think maybe I''m just missing something? Any feedback would be much appreciated :) Output below: root@vm:~# xm create /etc/xen/vm-nine.cfg Using config file "/etc/xen/vm-nine.cfg". Error: Failed to assign device to IOMMU (0000:05:00.0@100,msitranslate=1,power_mgmt=0)

I am running debian lenny, with the standard Xen 3.2 packages, with the 2.6.18-6-xen-686 kernel as dom0, and 2.6.24-1-xen-686 as domU. Everything is working fine apart from the console and the PCI passthrough. I am getting these errors in the domU on startup: XENBUS: Device with no driver: device/pci/0 XENBUS: Device with no driver: device/console/0 Does this mean the modules are missing?

Dear Gordan, I have a Gigabyte Geforce GTX 560. Is it possible to mod it into a Quadro? If it is possible, please give me the link with the list of steps to mod it into a Quadro. Is it a simple process? Thank you very much. -- Yours sincerely, Singapore Citizen Mr. Teo En Ming (Zhang Enming)

Dear Gordan, I have a Gigabyte Geforce GTX 560. Is it possible to mod it into a Quadro? If it is possible, please give me the link with the list of steps to mod it into a Quadro. Is it a simple process? Thank you very much. -- Yours sincerely, Singapore Citizen Mr. Teo En Ming (Zhang Enming)

Hello, I FINALLY got Xen working with VT-d. I compiled Xen-unstable (3.3) from Mercurial on CentOS 5.2, but compiled my own kernel-xen from the latest CentOS SRPM. (Made sure pciback was built-in and not a module, as the stock kernel-xen has it as a module.) I''m probably going to write a how-to soon, so stay tuned! I have a JMicron SATA/PATA PCI Express controller with a DQ35JO

Hello, I FINALLY got Xen working with VT-d. I compiled Xen-unstable (3.3) from Mercurial on CentOS 5.2, but compiled my own kernel-xen from the latest CentOS SRPM. (Made sure pciback was built-in and not a module, as the stock kernel-xen has it as a module.) I''m probably going to write a how-to soon, so stay tuned! I have a JMicron SATA/PATA PCI Express controller with a DQ35JO

Hi all!. First of all sorry about my English it''s not very fluid. I have a small server based upon Supermicro X7DBN (Chipset Intel® 5000P) motherboard and Intel Xeon E5320 (1,83Ghz) with 4Gb of FB-DIMM RAM. The OS is Debian Lenny in dom0 (2.6.26-2-xen-amd64) and Debian Lenny in domU (2.6.26-2-xen-amd64). Xen is 3.4.2 compiled from sources. The problem comes when I need to passthrough

The attached patches allow the pciback module to perform a reset whenever a PCI device is: - attached to the pciback module, as so: echo "0000:01.07.0" > /sys/bus/pci/devices/pciback/bind - detached from the pciback module, as so: echo "0000:01.07.0" > /sys/bus/pci/devices/pciback/unbind - and when the guest is done with (internally when the guest is not using

Hi all, I were upgrading my system recently. But I met some difficult problems, the biggest one is described in http://permalink.gmane.org/gmane.comp.emulators.xen.user/66971, unfortunately I got no answer yet. My original environment is xen3.4.2(64bit) + dom0 kernel 2.6.18-xen, and 4 domus with kernel 2.6.18-xen, after first upgrade stage, I have Xen4.1.0(64bit)+dom0 kernel 2.6.32.39, and 4 domu

Hi all, I were upgrading my system recently. But I met some difficult problems, the biggest one is described in http://permalink.gmane.org/gmane.comp.emulators.xen.user/66971, unfortunately I got no answer yet. My original environment is xen3.4.2(64bit) + dom0 kernel 2.6.18-xen, and 4 domus with kernel 2.6.18-xen, after first upgrade stage, I have Xen4.1.0(64bit)+dom0 kernel 2.6.32.39, and 4 domu