similar to: Xen 4.1.4 fails to boot Linux in wheezy

Xen-users, I have what I think is a bug in the serial console interaction of Xen and Ubuntu. Essentially, the serial console appears to work just fine until it is passed off to dom 0 from Xen. Then it stops communicating with dom0, but still communicates with Xen, if I use the control-A escape sequence. Google will not show me anything related to this. I have local RS-232 serial console working

I''m having a problem with the boot sequence hanging indefinitely at "stopping system V runlevel compatibility". Here are the steps I took to get to this point: 1) installed a single boot, server version of ubuntu 11.10 (intended to be dom0) 2) apt-get install xen-hypervisor-4.1-amd64 xen-utils-4.1 xenwatch xen-tools xen-utils-common xenstore-utils 3) updated grub as follows: -

Package: xen-hypervisor-4.1-amd64 Version: 4.1.4-2 Severity: important I've installed wheezy Linux successfully (ref. bug 703469). Installed xen-linux-system-amd64, with the diversion in http://wiki.debian.org/Xen#Prioritise_Booting_Xen_Over_Native followed by "grub-install". Xen appears to boot (messages go by fast), then I get a blank screen, followed seconds later by a

Hello List, I'm ironing out details to upgrade a few systems to CentOS7. My servers have BMC with Serial over LAN support. In C5 and C6, I determined how to have BIOS/POST, kernel, and serial console access. I'm reading up on the method to accomplish the pieces with C7. Presently SoL output works, so I see BIOS/POST messages and the GRUB boot list. My changes to enable serial

I've been trying to use memdisk with grub2 to boot some iso images -( I've done this without any problem with pxe ) There is a memdisk.mod in /boot/grub/ and I've seen some material talking about this, but no example of a menu. After trying countless permutations - Right now I have : menuentry "Memtest-Plus 4.2" { echo `hello` insmod lvm

Is there a way to get GRUB2 and the kernel to run a "serial" console under KVM? I'm running a Fedora 20 desktop, with libvirt-managed VMs. When I run a CentOS 6 VM, I can set both the boot loader and kernel up to use ttyS0 and get a console compatible with "virsh console". When I try the same with a CentOS 7 VM, it doesn't work. If I set it to ttyS0, I just

Hi all, i have a xen 4.3 installation and would like to have a bridge bond szenario: *** eth0 eth1 | | bond0 | br0 | vif = [ ''bridge=br0,mac=xx:xx:xx:xx:xx:xx'' ] *** With the network script in debian wheezy *** /etc/network/interfaces auto bond0 iface bond0 inet manual slaves eth0 eth1

Deal developers, I'd like to follow the thread http://www.zytor.com/pipermail/syslinux/2013-April/019761.html but change the subject to 'pxelinux 5.10 and memtest86+ 4.20' and provide more test cases. The pxelinux before version 5, e.g. version 4.06, worked very well with memtest86+ 4.20, all my PXE client machines, including VMWare workstation 9, VirtualBox 4.2, and all the real

Hello, I'm trying to pass the serial port options to memtest86+ using Syslinux 5.01 but is not working. Debugging the memtest86+, the check at main.cpp function static void parse_command_line(void) if (*OLD_CL_MAGIC_ADDR != OLD_CL_MAGIC) return; Is being evaluated to true. What should I do? There is a way to instruct memtest to use the "old way" to pass

Hi there, ----- Original Message ----- From: koxudaxi at gmail.com To: syslinux at zytor.com Date: 01.04.2013 10:00:27 Subject: Re: [syslinux] Problem with pxelinux 5.0 and memtest > On 04/01/2013 09:28 AM, H. Peter Anvin wrote: >> On 03/31/2013 05:26 PM, Koudai Aono wrote: >>> I ran the test on a x86 emulator is called Oracle VirtualBox. >>> I think it might not be

Hi guys! I tried to boot memtest86+ v4.2 (renamed memtest.bin to memtest), and i have issues to boot it with pxelinux 5.x and greater.Pxelinux 4.06 works fine both memtest 4.1 and 4.2. With version 6.00 no error message caught, only writes out dots. Any keypress does a reboot.With version 5.01 the error message is the follow:Loading images/memtest/memtest86... okBooting kernel failed: Bad file

On 06/28/2013 04:07 PM, Gene Cumm wrote: > On Fri, Jun 28, 2013 at 12:53 PM, Gene Cumm <gene.cumm at gmail.com> wrote: >> On Fri, Jun 28, 2013 at 10:13 AM, Ady <ady-sf at hotmail.com> wrote: >> >>> But, in Syslinux 4.06, there is linux.c32, which is a sort of >>> introduction to Syslinux 5.xx (please allow me to be not strictly >>> accurate in

On Thu, Sep 12, 2013 at 12:24 AM, Steven Shiau <steven at nchc.org.tw> wrote: > On 2013/9/12 11:55, Steven Shiau wrote: >> >> Deal developers, >> I'd like to follow the thread >> http://www.zytor.com/pipermail/syslinux/2013-April/019761.html >> but change the subject to 'pxelinux 5.10 and memtest86+ 4.20' and >> provide more test cases.

Hi, OK. I build syslinux-6.02-pre6 from https://www.kernel.org/pub/linux/utils/boot/syslinux/Testing/6.02/syslinux-6.02-pre6.tar.gz on a Debian jessie/sid system (with gnu-efi_3.0u+debian-2 from experimental): root at jessie: ~# cd /tmp root at jessie:/tmp# wget https://www.kernel.org/pub/linux/utils/boot/syslinux/Testing/6.02/syslinux-6.02-pre6.tar.gz root at jessie:/tmp# tar xfz

On Fri, Jun 28, 2013 at 10:13 AM, Ady <ady-sf at hotmail.com> wrote: > But, in Syslinux 4.06, there is linux.c32, which is a sort of > introduction to Syslinux 5.xx (please allow me to be not strictly > accurate in this sentence in this context). > > Booting with any variant of Syslinux 4.06, but using linux.c32, > memtest would fail, which indicated some kind of problem

Platform: MS XP 1. cfg file: prompt 1 timeout 150 display /downloadedPrograms/syslinux/syslinux.cfg default xp label xp com32 chain.c32 append hd0 1 ntldr=/ntldr label de com32 chain.c32 append hd0 2 label memtest linux memtest86+.bin label hello com32 hello.c32 2. Installed by >From xp cmd prompt:

I have updated syslinux in Parted Magic's test version to the 5.10 release. With 4.06 I booted plop like this: LINUX /boot/plpbt/plpbt.bin Now it says /boot/plpbt/plpbt.bin... ok Booting kernel failed: Invalid argument Other "extras" like IPXE, HDT, memtest86+, chntpw, Super Grub Disk, etc... all work with 5.10. Revert to 4.06 and plop works again. Is this a problem with syslinux

Hello, This is my first post to this list. After searching through the archives and google searches I could not find a solution for my memtest problem. In previous versions of pxelinux/gpxelinux (4.04 and 4.06) I could successfully start the memtest utility. But using pxelinux/gpxelinux versions 5.01 and 5.02 the memtest utility does not boot and I get an error message: boot: Loading

El lun, 23-10-2006 a las 16:28 +0400, Kirill Korotaev escribi?: > J.J.Garcia, > > in july 2006 you reported hit of bio.c:99 bug on CentOs kernel: > http://lists.centos.org/pipermail/centos/2006-July/067539.html > > Recently, we also hit the same bug, so maybe you can provide some details on: > 1. whether it is doesn't work for you or was fixed. > 2. how it was

I've just spent at least half an hour swapping files, downloading things and stuffing around with memtest86 and memtest86+. I can't get either to start from pxelinux. Currently I have "memtest86" as the filename, and i'm trying to load it direct (not trying to use memdisk or anything). This just results in a near instant reboot. Am I doing something wrong? I can't