similar to: Failed to setup GSI - dom0 Linux Kernel Boot Issues

Hi, I''ve got similar problem - after HW failure - two of three disks became unavailable and now I''m unable to btrfsck. Btrfs lays on /dev/sdb1,/dev/sdc1,/dev/sdd1 - sdc+sdd became unavailable Here is kernel log: ============================================ Mar  9 23:56:28 ftp2 kernel: [121492.593338] ata7.00: exception Emask 0x60 SAct 0x1 SErr 0x800 action 0x6 frozen Mar  9

I''ve been trying to install a 2.6.37-12 kernel from kernel-ppa on one of my Ubuntu machines without success. It keeps giving errors like this: [ 9.115544] ata9: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x10 frozen [ 9.115550] ata9.00: failed command: READ FPDMA QUEUED [ 9.115556] ata9.00: cmd 60/04:00: d4:82:85/00:00:1f:00:00/40 tag 0 ncq 2048 in [ 9.115557]

I just installed CentOS 5 on a computer. On boot, I get the a error message, related to 2 SATA disks. These errors did NOT appear on version 4.4 with the EXACT same hardware. Could someone please tell me what these error are and if there is some known way to prevent them? My configuration: - 2 Hitachi SATA 120 GB Harddisks - Intel P4 3GHz - Tyan Tomcat i875p motherboard - 1 GB ECC RAM - 2

I just installed CentOS 5 on a computer. On boot, I get the a error message, related to 2 SATA disks. These errors did NOT appear on version 4.4 with the EXACT same hardware. Despite the error messages, the disks seem to be working with no problems. Could someone please tell me what these error are and if there is some known way to prevent them? I searched the Net for these errors and they seem

Hi, I have some errors in dmesg: [ 542.255788] ata1.00: exception Emask 0x0 SAct 0xffffff SErr 0x0 action 0x0 [ 542.255797] ata1.00: irq_stat 0x40000008 [ 542.255805] ata1.00: failed command: READ FPDMA QUEUED [ 542.255821] ata1.00: cmd 60/00:00:1a:b7:7a/04:00:1d:00:00/40 tag 0 ncq 524288 in [ 542.255824] res 41/40:00:a0:b7:7a/00:00:1d:00:00/40 Emask 0x409 (media error) <F> [

Hi, My xen guest stopped booting suddenly and giving me the below error message. Any idea what is going wrong here? DOM 0 boots OK though. ata5.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 ata5.00: irq_stat 0x40000008 ata5.00: failed command: READ FPDMA QUEUED ata5.00: cmd 60/00:00:cd:ee:36/02:00:09:00:00/40 tag 0 ncq 262144 in res 51/40:72:5b:f0:36/d9:00:09:00:00/40 Emask

Hi, My xen guest stopped booting suddenly and giving me the below error message. Any idea what is going wrong here? DOM 0 boots OK though. ata5.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 ata5.00: irq_stat 0x40000008 ata5.00: failed command: READ FPDMA QUEUED ata5.00: cmd 60/00:00:cd:ee:36/02:00:09:00:00/40 tag 0 ncq 262144 in res 51/40:72:5b:f0:36/d9:00:09:00:00/40 Emask

On 14.05.20 08:44, teawater wrote: > Hi David, > > I got a kernel warning with v2 and v3. Hi Hui, thanks for playing with the latest versions. Surprisingly, I can reproduce even by hotplugging a DIMM instead as well - that's good, so it's not related to virtio-mem, lol. Seems to be some QEMU setup issue with older machine types. Can you switch to a newer qemu machine version,

Hello, A message was already posted here regarding this issue- I experience the same problem with 6 machines, all with Hitachi harddrive, VIA Motherboard which uses the sata_via driver: Once every few days each machine freezes or just stops reading from the HD and throws i/o error messages as pasted below. Note that the first "ata exception Emask" errors apear right after booting,

For some time I have been seeing disk errors in the syslog every seven days. Until today it always happens Sunday morning at 8:13 AM, plus or minus a minute or two. Yesterday it happened at 1:13 AM. Here are the pertinent log entries for the latest occurrence: Jan 6 01:12:29 g2 kernel: ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Jan 6 01:12:29 g2 kernel: ata9.00: BMDMA stat

Hello, I was testing Fedora 16 (rc2) Xen host, with included Xen 4.1.1 rpms and Linux 3.1.0 dom0 kernel. Fedora 16 PV domUs seem to work nicely. I noticed a problem with Fedora 16 Xen HVM guests though. The F16 guest kernel (Linux 3.1.0) fails with the qemu-dm emulated DVD-ROM drive.. Full HVM guest kernel dmesg attached to this email. See the end of this email for Xen cfgfile for the

Observed on Linux 3.2.9 after the controller/disk flaked in-out. (The world still needs a SCSI error decoding tool to tell normal people what cmd and res are about.) [ 157.732885] device label srv devid 4 transid 11292 /dev/sdf [ 157.733201] btrfs: disk space caching is enabled [ 172.936515] device label srv devid 4 transid 11292 /dev/sdf [44106.091461] ata4.01: exception Emask 0x0 SAct 0x0

Hi, One of my disks, partitioned into a single btrfs partition, is showing media errors. The problem is that these errors lead to kernel panic from btrfs - that make the filesystem unusable until reboot - and therefore it is very hard for me to do a full backup of the data prior to changing the disk. My current kernel is 3.2.0-8-generic from Ubuntu/precise (based on linux 3.2-final) but I

Hi All, We're currently trying to use samba in an embedded application, so we're working with samba 3.0.2a compiled for PPC. We have a test application which will basically write, then read back and compare data files on the disk. The problems we see occur when we try using just over 3500 small files (< 10k each). It seems that after about 200 or so iterations of this test, we start

Hello Ben, The working kernel code I based my investigation was a 1.3.17 + gentoo patch (so yes, pretty old) The new one below, not working is the vanilla 3.19 (from the gentoo repo, should be identical to the latest 3.19 stable) I've narrowed down the issue to the size of the eld. The new patch (that indeed uses drm_eld_size) (with this patch, I have a working 3.19 kernel): I will need to

On Fri, 2013-09-06 at 16:39 +0200, Alessandro Vesely wrote: Both sets of log contain stuff like: > Sep 6 15:22:53 pcale kernel: [ 126.828195] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x80000 action 0x6 frozen > Sep 6 15:22:53 pcale kernel: [ 126.828199] ata4: SError: { 10B8B } > Sep 6 15:22:53 pcale kernel: [ 126.828201] ata4.00: failed command: SMART > Sep 6 15:22:53 pcale

On my C5 machine (a Dell XPS420) I have a 500Gb disk on the internal SATA controller. I also have a SiI3132 dual-port multi-device eSATA card. This is connected to an external SATA array of disks. Now occasionally I see something like this in my logs ata7.01: exception Emask 0x0 SAct 0x0 SErr 0x0 a ction 0x0 ata7.01: irq_stat 0x00060002, device error via D 2H FIS ata7.01: cmd

Hi All, I am fairly certain that this disk is failing in my server, and I am replacing it straight away anyway. However, I'd appreciate the views of the list just to be sure as I value your opinion(s). I got these errors, once only so far, in /var/log/messages. This disk has / on it. Oct 5 08:34:47 server1 kernel: ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0 Oct 5 08:34:47

Hello, I was wondering if anyone could point me in the right direction? I am receiving these in my log file and do not know what they mean or what to look for; Mar 8 04:03:56 bms kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Mar 8 04:03:56 bms kernel: ata3.00: cmd 25/00:28:42:d3:37/00:00:13:00:00/e0 tag 0 cdb 0x0 data 20480 in Mar 8 04:03:56 bms kernel: res

Hallo, "never change a running system" ... For some months I run btrfs unter kernel 3.2.5 and 3.2.9, without problems. Yesterday I compiled kernel 3.3.4, and this morning I started the machine with this kernel. There may be some ugly problems. Copying something into the btrfs "directory" worked well for some files, and then I got error messages (I''ve not