similar to: xen / xencenter - no mouse or keyboard on HVM, PVM works?

same problem with Windows XP SP3 some problem accessing with XenCenter from different clients (XP and W7) the only interesting logs seem: [20130906T07:25:14.943Z|debug|titanio|191 INET 127.0.0.1:80|Connection to VM console R:73f4468306ca|console] Proxy exited [20130906T07:25:14.947Z|debug|titanio|96 INET 127.0.0.1:80|event.from D: 1327d493dfe8|backgroundscheduler] Removing function

Hi I''ve Debian 7 64bit with Xen 4.1 and XenCenter 6.2 build 1204 I successfully installed 3 debian guest VM, and all is ok But I tried to install a Windows Server 2003 VM and I can''t use console, it doesn''t respond I googled and find some users with similar problem, but they solved simply close and enter xencenter, but in my case this workaround doesn''t work I

Hi list, I recently installed the Trixbox distribution as an HVM and have now converted it to a PVM. Found very few resources on Internet where people had done this conversion so I had very little to compare with. Wanted to ask for comments about the kernel used in the PVM after the conversion. Installing Trixbox and later installing the xenified kernel, gives a kernel of 2.6.18-92..... In my

more details: Physical machine: cpu-I5 3.1G, RAM 16G -- View this message in context: http://xen.1045712.n5.nabble.com/Performance-of-PVM-and-HVM-tp5711212p5711286.html Sent from the Xen - User mailing list archive at Nabble.com.

no one care about this -- View this message in context: http://xen.1045712.n5.nabble.com/Performance-of-PVM-and-HVM-tp5711212p5711304.html Sent from the Xen - User mailing list archive at Nabble.com.

running xen cloud on my ubuntu12.04 box connecting with xencenter - i can create delete and monitor VM''s when i connect to the console i can see the console output but none of my keypresses or mouse clicks are registered in the VM everything i hit a key i get this in my xcp-xapi log [20120721T17:17:20.330Z|debug|xen|509 INET 127.0.0.1:80|Connection to VM console R:73c96b23cdd8|console]

I have installed xcp/xen on ubuntu 12.04 server using the instructions found here: http://wiki.xen.org/wiki/XCP_toolstack_on_a_Debian-based_distribution It seems to be running correctly and I can access it using XenCenter and create and run vm''s. However, the keyboard doesn''t work in the vm console. The mouse works fine, but no keyboard. I have tried a vm with Windows 7 64

Hi, I tell you my problem: I've installed a Ubuntu's HVM guest in CentOS with XEN, then I convert my HVM to PVM based in this tutto : http://www.asplund.nu/xencluster/xen-convert-hvm-to-pvm.html After this modification everythings it runs fine but I have a problem with xconsole, I don't see anything when I run the command "xm console ID" , I only see the boot proccess and the

I have wine 1.3.21 under Linux Mint 10 with all updates and patches installed. I put in the NFS disk and went through the installer just fine. Then I start the game (using the icon on the desktop, however the same bug is present when I start it with the .exe in the game folder) The game goes through the don't try this at home speach (which I used to be able to skip by clicking or pressing

I''m trying to do nested XEN to give some of my colleagues a play area to work in, and it seems to work - but not quite. I can build the nested environment (using OVM, and I have to step back to OVM3.2.2 to allow me to do PCI passthrough), but as soon as I start up a VM with a phys device passed through, the first layer loses all connectivity to the SAN. Setup: * 2 UCS

Hi Xenners, I have tried to upgrade to kernel 3.5 and experienced the USB/PCI passthrough problem. This has not been "fixed" in 3.6 either. I do not know if this is qemu, xen or kernel related. I am using Xen 4.2 final and Xen 4.3-unstable to test. DomU is Windows 7 64 bit or Linux Fedora 17. In Windows, I get the little yellow triangle with Code 10 (I know this means nothing...

If XCP supports Heterogenour CPU''s and Xencenter only supports it with advanced editons, how will XCP handle it when being used with Xencenter. I have a bunch of different Intel Cpu''s with different steppings and would like to be able to live migrate from within xencenter. Now I have to use the cli commands with my xenserver network and force the migration, but looking to move to

I''m going to set up a PVM on xen-3.3.1 debian-amd64. I need advices about the best methods to install a fresh debian on it (i.e. how to choose the kernel for pvm) . I''ve installed xen from sources and only have one xen kernel in /boot which I''m using for dom0; should I use the same kernel for domUs? There is any problem on use vcpus=2; the other vm is an hvm running

Hi, I have installed XCP 0.5 on the HP Server. To create VM''s i installed Xencenter V5.6.0(Build 31188). Adding the server is successful but after that it get the below error. "The version of Xencenter is out of date and cannot connect to "hostname" " Please also check the attached log & let me know any possiblity to connect from Xencenter client. -- Regards,

Hi, to use the host keyboard and touchpad of my laptop while running a HVM guest with passthroughed primary gfx-card I wrote a simple emulation. To activate it change gfx_passthru=1 -> gfx_passthru=1001 in the domU config file. This was done this way to have a small footprint. Also the embedding in helper2.c is a little bit awkward. Another problem using this way is that the VT in dom0 is not

Dear all, How to make XCP cannot management by XenCenter? We have an environment about 10 XCP host, and provide about 50 vm for users, We notice that some users want to use XenCenter to connect the XCP host, even they don’t have password, so we want to make XCP cannot use XenCenter and only for console management, is it possible? Sorry for the strange question,

Hello everyone, I have XCP installed on a machine, with a guest OS running windows 7. Is there a way to login locally on the host machine itself (as opposed to using the console view in XenCenter?). The reason I am asking is that I am trying to look at interactions between Xen and graphics cards, and I want to make sure that the graphics card is being used ( as opposed to rendering through RDP).

The Real Problem is discussed at the bottom of this message: On Tue, Dec 11, 2012 at 11:38 AM, Ian Campbell <Ian.Campbell@citrix.com> wrote: > On Tue, 2012-12-11 at 16:30 +0000, Terry Phelps wrote: >> I am trying to develop a procedure for backup and restore of a Xen >> PVM. I am having a problem with booting the restored machine. I''ll >> tell you the symptom,

Thanks you all guys. I am able to create the RHEL5 PVM on RHEL5 host successfully. Only thing that i need to add is /mnt/etc/fstab in inintrd command and preload to both the fronthend drivers. As blow. # mount /home/disk /mnt # mkinirtd /boot//boot/initrd-2.6.18-8.el5xenU.img 2.6.18-8.el5xen --fstab /mnt/ etc/fstab --with xenblk --with xennet --preload xenblk --preload xennet Thanks a lot,

Hello R enthusiasts, I am working with a Fedora Core 6 OS and R 2.5. I have just finished loading PVM on my test cluster and this is working properly. Also, rpvm has been loaded in R. However, when I try to load my test program, I receive this error: Loading required package: rpvm Error in dyn.load(x, as.logical(local), as.logical(now)) ; unable to load shared library