similar to: LSI SAS 2008 controller in a pv domu

Hello, I hope that I am posting the correct list with this question. I have been trying to get VGA passthrough working on my system for some time now without success. I do not have the system with me right now, so I will not be able to provide any logs or error messages right now. I will be able to to do so in a couple of hours. I have a VT-d enabled system (Motherboard and CPU) on which I wish

Hello, I hope that I am posting the correct list with this question. I have been trying to get VGA passthrough working on my system for some time now without success. I do not have the system with me right now, so I will not be able to provide any logs or error messages right now. I will be able to to do so in a couple of hours. I have a VT-d enabled system (Motherboard and CPU) on which I wish

Hello, Which linux kernel is best suited for the dom0? According to this http://wiki.xen.org/wiki/XenKernelFeatures, linux 3.1.0 is the latest version supported, but this page was last updated Oct 2011. Thanks _______________________________________________ Xen-users mailing list Xen-users@lists.xen.org http://lists.xen.org/xen-users

Hello, I have encountered a rather strange issue with memory allocation to the domU. I am trying to run FreeBSD in a HVM, my config file is: [root@xen-srv sandi]# cat /etc/xen/vm/freebsd.cfg builder = "hvm" vcpus = 1 memroy = 2048 disk = [ ''phy:/dev/xen-dom0/freebsd,hda,w'' ] name = "freebsd" #vif = [''bridge=xenbr0,mac=00:16:3e:00:af:d8'']

Hello, I am looking into building a workstation using Xen to host several operating systems. Looking at the pci passthrough requirements of Xen4.1 on the VTdHowTo<http://wiki.xensource.com/xenwiki/VTdHowTo>page, I am a little puzzled with the fact that only Intel Core2Duo (with VT-x), Core2Quad, i7 and Core i5 (vPro Brand) CPU''s are supported while motherboards with the i55x0

Hello, I have tried to use the blazer_ser driver to interface with my UPS. nut is not able to detect the UPS. I have not been able to find much info regarding Socomec UPS support in nut. Socomec does publish a description of the serial protocol for these UPS's, which can be found here: http://www.socomec.com/download-jbus-modbus.html(select UPS OTHER for device model, 1-5KVA for device power

Hello all, I have a problem with Xen and FibreChannel. The Dom0 can''t export a Disk on a FibreChannel SAN-Box to the DomU''s. In the DomU configuration I try: disk = [ ''phy:/dev/sdb1,/dev/sda1,w'' ] or disk = [ ''file:/mnt/sambashare.img,sda1,w'' ] sambashare.img is a 512MB great Diskimage on a Partition on the FC-SAN-Box, the Dom0 mount this

Hi, folks, Got an older Dell R410, with an LSI 1068E PCI-Express Fusion-MPT SAS (rev 08). It *appears* that a) trying MegaRaid, and b) from what I'm googling, that what I need are mptfusion-related packages. Unfortunately, yum shows me nothing available in base, epel, or rpmfusion. Am I looking for the wrong thing, or does anyone have a source (no, I haven't looked at LSI, sorry

Hi, is there a driver disk available for the LSI 1064e SAS controller, operating in software raid mode? This Controler is installed on the Intel SR1500ALSAS for example, and named here Intel Embedded Software RAID II. I found drivers for RHEL4 and SUSE 10, but not for CentOS5? If I disable SAS Software-RAID in BIOS the system finds /dev/sda and /dev/sba and loads the mptsas drivers. But the

During the diagnostics of my SAN failure last week we thought we had seen a backplane failure due to high error counts with ''lsiutil''. However, even with a new backplane and ruling out failed cards (MPXIO or singular) or bad cables I''m still seeing my error count with LSIUTIL increment. I''ve got no disks attached to the array right now so I''ve also

Hi, I''m running OpenSuse 12.2 with kernel 3.5.3 HBA= LSI 1068e using the MPTSAS driver (patched) (https://patchwork.kernel.org/patch/1379181/) SANOS1:/media # uname -a Linux SANOS1 3.5.3 #3 SMP Sun Sep 2 18:44:37 CEST 2012 x86_64 x86_64 x86_64 GNU/Linux I''ve tried to simulate a disk replacement but it seems that now /dev/sdg is stuck in the btrfs pool (RAID10) SANOS1:/media #

Hi all, Sorry for the offtopic question. I hope though that others on this list or reading the archive find the answers useful too. It seems the Adaptec 1405 4port SAS HBA I bought only works with RHEL and SuSE through a closed source driver, and thus is quite useless :-( I was stupid enought to think "Works with RHEL and SuSE" meant "Certified for RHEL and SuSE, but driver in

Alle, I am trying to install CentOS 5 on a Dual Xeon 5160 FJ RX200 S3. The RAID hardware is an internal LSI MPT 1068 SAS/RAID controller (LSI 1068SASIME-2300). I have downloaded the drivers (mptsas, mptscsih and mptbase) and created the required floppy. When I run linux dd after booting from either the DVD or Disk 1 of the CentOS distro, it says it loads mptsas, mptbase and mptscsih and

On Xen-3.4 (unstable version), I have created CentOS PV guest and dedicated 1068 SAS controller but I am not able to see the disk which is connected to 1068 SAS controller when I do fdisk -l (vtd support is enabled in Xen). Looks like the pci device(SAS controller) is getting dedicated successfully as I can see the device in the list of pci devices shown by lspci. 05:00.0 SCSI storage

Hi all, I just noticed that my two nics that are bonded via mode 0 are showing the same mac addy in ifconfig. Is this normal? In syslog I keep getting; kernel: pbond0: received packet with own address as source address Some guidance is appreciated before I dive in and troubleshoot. If I don't list the mac addy in my ifcfg-th# files, only one of the 2 nic comes up during boot.

Can I use puppet to ensure that a file includes certain text but not be required to maintain the entire file? For example, I would like /etc/modprobe.conf to contain the following lines but the file will also contain lines that are system dependent. --------------------------------------------------------------------------------------- # Disable IPV6 alias net-pf-10 off alias ipv6 off

Hello all, I''m trying to pass my PCI device through to an HVM. I''m following the steps on the xen pci passthrough wiki. First I check my pci devices #lspci - 03:00.0 VGA compatible controller: ATI Technologies Inc Device 671d 03:00.1 Audio device: ATI Technologies Inc Device aa80 04:00.0 Display controller: ATI Technologies Inc Device 671d 04:00.1 Audio device: ATI

What is the best kernel to run? is it better to run 3.4.4 or one from xen git? _______________________________________________ Xen-users mailing list Xen-users@lists.xen.org http://lists.xen.org/xen-users

Hello Folks, This is the long awaited (like 2 weeks) 0.3.12 release of Mongrel. This release has received heavier testing than previous releases and supports a whole raft of improvements to existing functionality plus some new stuff. For those not clued in, Mongrel is a web server written in (mostly) Ruby. Check the funny dogs and read the docs about it at http://mongrel.rubyforge.org/. The

When I run rsync -v --exclude-from= -a --delete --numeric-ids -e ssh -i /root/.ssh/id_rsa /bin/ root@sandi:/export/home/scbackup/socnt01//bin/ I immediately get: rsync: connection unexpectedly closed (0 bytes received so far) [sender] rsync error: error in rsync protocol data stream (code 12) at io.c(359) rsync -v --exclude-from= -a --delete -e ssh -i /root/.ssh/id_rsa /boot/