similar to: Re: Reg PV-HVM templates

Hi guys, I have started preparing a library of PV-HVM templates for use on Xen 4.X+ and PVOPS dom0. This was brought up late last year as something that would make Xen alot easier for beginners to try. They are also great for testing - I will be setting up some stuff to do automatic testing of distro kernel compatibility against xen-unstable. Mirror page is here:

Hallo, I have an installed Windows 7 on one partition and running Debain Squeeze on the other. Both are 64 bit. I want to use Xen to run Windows as virtual guest from a physical disk. Once I get this working the Window will never be booted directly. When I try to create the virtual machine by "xm create -c win.xen" it hangs. The versions I use Xen 4.0.1-4 Kernel 2.6.32-5-xen-amd64

Hi, to make transitions more convenient, I've done this by using uuid instead of device names. If you ls -l /dev/disk/by-uuid inside your domU, you'll see something like lrwxrwxrwx 1 root root 10 5. Mai 07:38 39a2a64b-0716-47ad-92f4-a7437cac54ee -> ../../sda2 lrwxrwxrwx 1 root root 10 5. Mai 07:38 e8b97b59-a790-417c-8231-fe8da8b6e6ee -> ../../sda1 In /etc/fstab inside the domU,

Hi, I want to combine all the above mentioned technologies. The Linbit pages warn not to use the drbd: VBD with HVM DomUs. This page however: http://publications.jbfavre.org/virtualisation/cluster-xen-corosync-pacemaker-drbd-ocfs2.en (thank you Jean), simply puts two DRBD devices in dual primary mode and starts Xen DomUs while pointing to the DRBD devices with phy: in the DomU config files.

Hi, I'm using SolusVM control panel to create KVM VPS. Suddenly, I can't make any VPS on Host-Node. Their build log says the SolusVM can't read the libguestfs in server. During the debug, I've tried to mount existing VPS using guestmount command and I can't mount the KVM image. Please check here. [root@msv07 /]# guestmount -i -a /dev/msv07data/kvm139_img /mnt libguestfs:

On Thu, Jan 29, 2015 at 12:16:30AM +0530, Thirumalai Nambi wrote: > Hi, > > I'm using SolusVM control panel to create KVM VPS. Suddenly, I can't make > any VPS on Host-Node. Their build log says the SolusVM can't read the > libguestfs in server. > > During the debug, I've tried to mount existing VPS using guestmount command > and I can't mount the KVM

On Sat, Mar 14, 2015 at 03:13:28AM +0530, Thirumalai Nambi wrote: > Hi, > > I'm using SolusVM control panel to create KVM VPS. Suddenly, I can't make > any template on Host-Node. Their build log says the SolusVM can't read the > libguestfs in server. The error is: > guestfsd: error while loading shared libraries: liblzma.so.5: cannot open shared object file: No

Some smartcard readers have keypad to enter the PIN securely (i.e. such that it cannot be intercepted by a rogue (ssh) binary. PKCS#11 allows for enforcing this in hardware. Below patch allows for SSH to make use of this; against head/master as of today. Dw. commit 7f0250a8ae6c639a19d4e1e24fc112d5e2e1249a Author: Dirk-Willem van Gulik <dirkx at webweaving.org> Date: Tue Mar 17

Folks, Find below a minor patch to allow the use of smartcards in readers that have their own PIN entry keypads (Secure PIN entry) such as the SPR332 and most german/medical chipcard devices. Tested on Solaris, FreeBSD and MacOSX against various cards and drivers. I?ve left the pkcs11_interactive check in place. Arguably - with some Secure PIN readers it may be better to move this just in front

Repost; updated for HEAD and tested on ubuntu as well. Dw. Folks, Find below a minor patch to allow the use of smartcards in readers that have their own PIN entry keypads (Secure PIN entry) such as the SPR332 and most german/medical chipcard devices. Tested on Solaris, FreeBSD, Linux and MacOSX against various cards and drivers. I?ve left the pkcs11_interactive check in place. Arguably - with

Hello, I am struggling to find the root of a exponent function. "uniroot" is complaining about a values at end points not of opposite sign? s<- sapply(1:length(w),function(i) + { + + + + + uniroot(saeqn,lower=-5000,upper=0.01036597923,l=list(t=w[i],gp=gp))$root + }) Error in uniroot(saeqn, lower = -5000, upper = 0.01036597923, l = list(t = w[i], : f() values at

Thanks for the info. I can confirm doing the following works: yum install centos-release-qemu-ev yum install qemu-kvm-ev libguestfs-test-tool completes in 3 seconds. On 11 December 2017 at 16:49, Phill Bandelow <phill@onapp.com> wrote: > (1) This made no difference. It still hangs around the same place. > > (2) It wasn't enabled in the kernel so i enabled it. I then

Hi, I'm using SolusVM control panel to create KVM VPS. Suddenly, I can't make any template on Host-Node. Their build log says the SolusVM can't read the libguestfs in server. Please check here. /scripts/kvmtemplate --mode=prescan --vmid=kvm124 --generation=2 "libguestfs: error: guestfs_launch failed. See http://libguestfs.org/guestfs-faq.1.html#debugging-libguestfs and/or run

Hi, I build Xen 4.1.1 on a Gentoo base dom0. Everything is working great. I tried one of Joseph Glanville''s PV-HVM image (debian6) and its working as it should. Now l''im trying to build a Gentoo based domU with then same specs as Joseph''s PV-HVM. I used a copy of the .cfg and adapted to my needs to make the gentoo work. when booting the minimal install image using

hi all, I have just ported pvonhvm drivers to ubuntu 10.10(2.6.35), for ubuntu 10.10 was comply to the pvops, so it has it''s own blkfront, so I just add platform-pci to ubuntu 10.10 source, and then compile, that''s ok, then I start the ubuntu 10.10 with pvonhvm, the domU can boot successfully, but after running a moment, it give the such warnings: INFO: task

hi all, I have just ported pvonhvm drivers to ubuntu 10.10(2.6.35), for ubuntu 10.10 was comply to the pvops, so it has it''s own blkfront, so I just add platform-pci to ubuntu 10.10 source, and then compile, that''s ok, then I start the ubuntu 10.10 with pvonhvm, the domU can boot successfully, but after running a moment, it give the such warnings: INFO: task

Processing commands for xen@bugs.xenproject.org: > create ^ Created new bug #20 rooted at `<1571692646.20131009000945@eikelenboom.it>'' Title: `Re: [HVM} xen_platform_pci=0 doesn''t prevent platform device creation and disk and nic take over by PV drivers.'' > title it xen_platform_pci=0 doesn''t work with qemu-xen Set title for #20 to

We?ve been seeing this a lot lately on generic CentOS 6 rpm installs: rpm -qa | grep libguestfs libguestfs-java-1.16.19-1.el6.x86_64 libguestfs-java-devel-1.16.19-1.el6.x86_64 libguestfs-1.16.19-1.el6.x86_64 libguestfs-tools-1.16.19-1.el6.x86_64 libguestfs-javadoc-1.16.19-1.el6.x86_64 libguestfs-devel-1.16.19-1.el6.x86_64 libguestfs-tools-c-1.16.19-1.el6.x86_64

Thanks for your update, I got the libguestfs packages from the centOS base repo and installed it via yum. ================= [root@node1 ~]# yum install libguest* Loaded plugins: fastestmirror Setting up Install Process Loading mirror speeds from cached hostfile * base: mirrors.modern.host * epel: epel.mirrors.ovh.net * epel-debuginfo: epel.mirrors.ovh.net * epel-source: epel.mirrors.ovh.net

(1) This made no difference. It still hangs around the same place. (2) It wasn't enabled in the kernel so i enabled it. I then rebooted but unfortunately it made no difference. If you want access to a hypervisor to have a play around, let me know. The only information i really have is that if i installed CentOS 7.3 on this hypervisor it works fine. On 11 December 2017 at 16:24, Richard