similar to: Xen and ATI Radeon 4200

Hello, I compiled xen on ubuntu, but at the bot i got the kernel panic message. I enabled the support to ext4 fs. This is kernel panic error: EXT3-fs: unable to read superblock ETX4-fs (md0): unable to read superblock FAT: unable to read boot vector Kernel panic - not syncing: VFS: Unable to read superblock(9,8) My grub.cfg generated by update-grup: menuentry ''Ubuntu, with Linux

Confirmed this issue. To reproduce: Install a fresh Wheezy AMD64 guest under Xen 4.1 (hypervirtualized, boot from the debian-7.1.0-amd64-CD-1.iso). Use "entire disk" automatic layout for partitioning, this creates /dev/xvda1 for / and /dev/xvda5 for swap. It will create /boot/grub/grub.cfg with many references to (/dev/xvda,msdos1) which works fine when the machine is booted

hi guys, It''s my first time here and in a mailing lists, I only participated in forums before. Please, If I make a mistake you should advise me. Let''s go! I was reading "xencommons not start" in a Remus Forum in order to install Remus. Well… I followed the tutorial < http://remusha.wikidot.com/configuring-and-installing-remus>, I reboot in xen_unstable and I had

hi guys, It''s my first time here and in a mailing lists, I only participated in forums before. Please, If I make a mistake you should advise me. Let''s go! I was reading "xencommons not start" in a Remus Forum in order to install Remus. Well… I followed the tutorial < http://remusha.wikidot.com/configuring-and-installing-remus>, I reboot in xen_unstable and I had

Hello, I have installed the Xen 4.1.1 and a working kernel 2.6.32.43 which supports Xen on a Ubuntu Linux 10.04 LTS. However, I have never successfully booted the Hypervisor and Dom0. The screen is always black after some kernel messages rapidly go by. I think that I may pass the wrong parameters to the kernel or Hypervisor with GRUB2. Can any one share his/her working grub.cfg for GRUB2 with

Hello Xen folks, I use Debian Squeeze. I want to passthrough PCI devices. With the old stable Debian (grub legacy) i did not have problems. I edit /etc/default/grub like: quote: GRUB_CMDLINE_XEN_DEFAULT="quiet xen-pciback.permissive xen-pciback.hide=(00:14.2)(01:05.1)" I run "update-grub". Now i look at /boot/grub/grub.cfg: ### BEGIN /etc/grub.d/20_linux_xen

You get these if you install Debian Wheezy as HVM and then try to convert to PV. This is Debian bug #603391. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Tested-by: Tril <tril@metapipe.net> --- tools/pygrub/examples/debian-wheezy-hvm.grub2 | 104 +++++++++++++++++++++++++ tools/pygrub/src/GrubConf.py | 6 +- 2 files changed, 109 insertions(+), 1

Hi all- I''m using Ubuntu 12.04 and compiled unstable on revision 25605:9950f2dc2ee6, the compilation completed cleanly and I issued sudo make install. I modified the grub entry for Xen 4.1 as follows: menuentry ''Ubuntu GNU/Linux, with Xen 4.2-unstable and Linux 3.2.19'' --class ubuntu --class gnu-linux --class gnu --class os --class xen { insmod part_msdos insmod ext2

Hi all, I just upgraded my Debian/Etch with Xen3.3 machine to Debian/Squeeze Xen4.0 and now have problems with starting the Dom0 kernel. I always get the error message: Kernel panic not syncing: the kernel parameter noapic is incompatible with xen. My grub.cfg is: menuentry ''Debian GNU/Linux, with Linux 2.6.32-5-xen-686 and XEN 4.0-i386'' --cl$ insmod part_msdos

On Sat, 2013-09-28 at 20:59 -0700, Tril wrote: > Backtrace from manual run of the buggy GrubConf.py: > # python /usr/lib/xen-4.1/lib/python/grub/GrubConf.py grub2 grub.cfg > WARNING:root:Unknown directive load_video > WARNING:root:Unknown directive terminal_output > WARNING:root:Unknown image directive load_video > Traceback (most recent call last): > File

Hi. I''m trying to run Xen 4.0.1 with Debian Squeeze in Dom0 My grub config: menuentry ''Debian GNU/Linux, with Linux 2.6.32-5-xen-amd64 and XEN 4.0-amd64'' --class debian --class gnu-linux --class gnu --class os --class xen { insmod part_msdos insmod ext2 set root=''(hd0,msdos1)'' search --no-floppy --fs-uuid --set e719719a-35aa-4ada-8ab5-9b6c676bc89e

This grub.cfg from a default fedora 19 Beta install caused pygrub failures.The previous pygrub commit fixed taht. So this example file added for reference. Signed-off-by: Marcel Mol <marcel@mesa.nl> --- tools/pygrub/examples/fedora-19.grub2 | 117 +++++++++++++++++++++++++++++++++ 1 files changed, 117 insertions(+), 0 deletions(-) create mode 100644 tools/pygrub/examples/fedora-19.grub2

Hi, I am using Xen 4.2.3 installed on an Intel Atom with a Debian Dom0 and 3 Debian domU''s installed. I am trying to run some benchmarks using the Arinc653 scheduler. I have edited my grub options to boot with ''maxcpus=1 sched=arinc653'' options. I can boot the dom0 and verify that the scheduler is enabled. However when I xl create, the VM is created but I cannot

I have a couple Debian 6 HVM VMs. From what I''ve read, Debian 6''s standard kernels have pv_ops already enabled. I''d like to convert these to pv for the following reasons (Assuming both of are valid expectations): 1) so the VMs use pv for the NICs 2) so the VMs properly respond to shutdown/reboot commands from xm I''m having trouble converting them. I believe

Hi, I had posted the following issue a few days ago in Xen-users but I haven''t received any answer yet. So I decided to re-post it here in hope for some solution. Here''s the original post: Xen wiki states that using linux 3.0 and above as dom0 works with all graphics cards. I could install the fglrx graphics driver on my desktop machine with a discrete graphics card (Radeon

Hi, Xen wiki states that using linux 3.0 and above as dom0 works with all graphics cards. I could install the fglrx graphics driver on my desktop machine with a discrete graphics card (Radeon HD 5870), but I see a blank screen while loading fglrx on my AMD Fusion E350 machine with integrated graphics card (Radeon HD 6310). The graphics driver loads fine when the Linux kernel runs alone not as

Hi list After I install xen4.0 in my debian squeezz,it added the following lines into /boot/grub/grub.cfg ### BEGIN /etc/grub.d/20_linux_xen ### menuentry ''Debian GNU/Linux, with Linux 2.6.32-5-xen-amd64 and XEN 4.0-amd64'' --class debian --class gnu-linux --class gnu --class os --class xen { insmod part_msdos insmod ext2 set

Hi There . As from what I see, my system is not seeing all the available ( 4GB ) o memory, does xen take some for it''s own? Am I missing something in the kernel? netwarrior build-linux-2.6-pvops_x86_64 # dmesg |grep -i memo released 151863 pages of unused memory initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000aff90000 Memory: 2749108k/2883136k

Hi community. Let me tell you what happed to me. I configure samba to authenticate to an LDAP server, everything wokrs perfect, I got rid of the /etc/passwd file, now all my users reside in the LDAP database, I can connect via ssh for example without any problem, getent passwd returns the information as expected, till here just like a sharm. No, I connect from a windows 2000 client as

Hi @ll, i use an intel S5000VSA server board with two xeon cpus. I installed a debian squeeze amd64 system with debian xen and qemu packages. Before i installed xen i check out successfully the virtualization flag of cpus by grep "vmx" /proc/cpuinfo After installation of xen (http://wiki.debian.org/Xen#Installation_on_squeeze) i can not run a hvm domu. xm dmesg | grep -i vmx shows