similar to: How to Configure XCP 1.5 beta Installation

Hi, I have installed XenDesktop5.5 (express) and followed your XenDesktop 5 - QSG.pdf guide and I having this problem after a successful installation: "Object reference not set to an instance of an object." pop up when do quick deploy.  See attached xendesktop-error.jpg I am running XCP1.1 rc-base-50674 which is equivalent to XenServer 5.6 SP2. XenDesktop is running in a Windows 2008

I would like to install XCP. So I started at http://www.xen.org/products/index.html and found the section labeled ''Xen Cloud Platform Project'' This section was a nice overview but no links to docs or downloads. The next section was labeled ''USERS'' which had a download link to ''Xen Cloud Platform 1.5 Beta Download''

I''m trying to get XCI running on a Lenovo T61 with Intel-based graphics following the steps in the HOWTO in the build directory. I was able to get to the GRUB screen but never get to the "Welcome to XenClient" prompt. When I boot with the full console output, the system hangs indefinitely after "Starting XenConsoled". I''m well trained in the XenServer

Hello, this would be just a quick question: Is it possible to perform a p2v conversion from xcp-1.0 beta (or xcp 0.5) *.iso installation image? According to documentation (Administration && VM installation guide) yes, but there seems to be no such option to select during the boot. Thanks in advance. -- Daniel Sintaj http://daan.datacloud.sk

Hi All, I''m doing some testing with XCP 1.6 Beta and I can´t do the following migration: The VM is in a shared storage and I want to migrate to the same host in the local storage. Isn´t possible to migrate to the same host? Marcos Amorim _______________________________________________ Xen-users mailing list Xen-users@lists.xen.org http://lists.xen.org/xen-users

Hello, I have a problem with storage over NFS (NFS server is running on Open Solaris 10 with NFS version client/server/min/max=3) cat /var/log/messages from cnode1 (XCP 1.0 beta) during instalation new VM: an 18 22:57:37 cnode1 tapdisk[9661]: ERROR: errno -88 at vhd_complete: /var/run/sr-mount/2d5ed3ca-7e4d-bceb-f959-542d3bade15e/3d69f4a6-743d-486e-8a65-1734e6ef0b67.vhd: op: 2, lsec:

I''m trying to build out a test cloud using XCP 1.0.0 beta with 3 machines of 18 cores total (Phenom II 1090s). I''ve built three machines, installed XCP 1.0.0 beta on them and they all three have the same problem - the Realtek network cards don''t work. The following is the output from lspci 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI

Hi Folks: I am a NOOB and need some help and/or advice about debugging a domU VM boot problem in XCP 1.0 beta. I am trying to get my first VM installed over the network using XCP 1.0 beta. I am able to get to the VNC boot window but the installation process fails after a few minutes with this error: Unable to retrieve http://10.45.2.1//tcc/os/CentOS-5.5-x86_64/images/stage2.img

Hi How can i enable this feature because: Running /opt/xensource/libexec/mpp-rdac --enable it says: No module mppUpper found for kernel 2.6.32.12-0.7.1.xs1.0.0.298.170582xen, aborting. There is no MPP modules... Terveisin/Regards, Pekka Panula, Sofor Oy - Jatkuvat palvelut _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com

As seen on the mailinglist, many have been hit by the issues with the igb driver included in xcp 1.1 and below ( and 5.6 fp* and below as well ), version 2.4.3, which due to a bug prevents VLAN tagging and other features from working correct (sr-iov). This mainly affects systems with Intel 82576 nics. There are work arounds for this, mainly updating the driver from intel, see here:

I created a NFS VHD SR(\nfs\xxxx-yyyy-zzzz-wwww) on host “A” and created set of disks(vhds). I de-attached the SR from “A” and attached to host “B”. Host B seeing all the disks. Its working up to that fine. But I again de-attached the SR and attached to host A, it shows no disks in that SR. While reattaching to host “A” it shows the SR existing but after attached nothing comes. If I create

Hello List, On XCP1.5 ballooning of CentOS6.X does not work correctly. The DomU can be ballooned up only till its start_target_mem and seems to disobey the static max. For e.g If I start a CentOS6 DomU with 4GB RAM then ballooning works fine between 256MB to 4GB but it cant go beyond 4GB though it has static max as 16GB. I can confirm same issue on XCP1.1, so it might be something only with

1. I''d like to experiment with XCP by creating a nested arrangment - XCP on VirtualBox - but need to know what "version" of Linux to specify when creating the VM. 2. I''m currently using a 32-bit host. (Mageia-1 is/was only available as a 32-bit O/S when I installed it.) Does XCP require a 64-bit architecture? Eric Pretorious Truckee, CA

hi, i installed xcp build20719. it seems that it failed to configure the gateway address. 1. i told the installer my gateway address. 2. on xvconsole, "Configure Management Interface" shows the correct gateway address. "Ping gateway address" works. 3. however, the address doesn''t seem to be told to the kernel. route(8) doesn''t show the default

Package: xcp-xapi Version: 1.3.2-6 Severity: minor Tags: upstream If xe pif-configure-ip called twice with different IP, it did not remove old IP from interface (but didn't store both addresses in database). (Checked for management interface) Steps to reproduce: xe pif-reconfigure-ip uuid=... ip=IP1 .... xe pif-reconfigure-ip uuid=(same) ip=IP2 ... 'ip addr show' shows both

Hi: Sorry for the basic NOOB question but I managed to create a VM but now I am stuck. On page 26 of the XCP Virtual Machine Installation Guide it says "VNC and perform the OS installation". I tried everything I could find (listed below) but I am stuck. Any help would be greatly appreciated. Thanks in advance. Here are two questions whose answers would really help: 1.

I would like to gain some idea of the XCP impact of these two CPU versions: Intel Core i7-2600, 3.4 GHz Core i7-2600K, 3.5 GHz Both have VT-x Differences 2600K does not include: Embedded Opions Available vPro Technology Virtualization Technology for Directed I/O Trusted Execution Technology Is the difference critical? Thanks, ray

The Kronos page: http://wiki.xen.org/wiki/Project_Kronos includes these two entries: A couple of network-related notes + XAPI expects to run in a clean environment, and listens on ports 80 and 443. If you''re running anything else on these ports (typically Apache/Apache2), then you''re likely to have problems. + There is a known bug (which needs to be fixed)

Hey guys, Has anyone had much success with XCP and Open Stack together? I''m in the process of putting together a open stack test cluster and I thought I might be able to use XCP dom0''s for it.. but to be honest it doesn''t look so good. I tried following these instructions on a separate XCP test machine: http://wiki.openstack.org/XenServerDevelopment At a first test

Hi I install the xcp from the http://wiki.xen.org/wiki/XAPI_on_Ubuntu. But I got this error while configuring xcp-xapi: xcp-networkd (1.3.2-1ubuntu1~oneiric1) wird eingerichtet ... Starting the XCP networking daemon: .............................. * failed to start xcp-networkd. invoke-rc.d: initscript xcp-networkd, action "start" failed. when I comment the