similar to: [XCP] Xen Xsconsole - Opensource GPL'd?

I''m trying to contain my frustration...but I''m wondering if *anyone* has *ever* gotten the Import functionality to work in XCP? I''ve tried several times, and keep getting the same obnoxious and useless error that is absolutely no help to anyone: Failed to Import. I have made sure that the transfer VM is installed (View -> Show Hidden Objects, transfer VM is there),

Hi, I''ve been trying to use E5520 and X5650 together in an heterogeneous pool without success. I know the combination is not on the official XenServer supported list (http://hcl.xensource.com/CPUPoolsList.aspx), but I thought it would be possible to set the mask anyway and see for myself if the combination works… My problem is that the mask doesn''t "stick" after a

Hello, I hope to be in the right list. my question is the following. I can''t seem to get multipathing configure on XCP 1.6. In XenCenter I was able to enable "Multipath" however, in the LUN under general tab I see " multipath 1 of 1 active", the the CLI I do the following command xe --m node session it list only one session. Can someone help me please? Thanks in

Hi all, I am experimenting an issue with XCP 1.0 and NetApp storage model . My XCP server has a QLE2460 single channel fibre card. I have successfully connected the server to the storage. I can see the LUN connected via fibre channel by using scli command: scli output: ---------------------------------------------------------------------------- ---- HBA Instance 0: QLE2460 Port 1

Hi guys, I am testing out some FC storage in my XCP environment but I''m a bit confused on the right way to proceed. XCP actually sees the cards "under hardware in xsconsole". I made a lv available to the XCP box I''m testing on but both fdisk -l and via the XCP cli and ui the lv isn''t there. As I understand it from the documents I''ve read, you

Hi there. I needed to recompile xapi to fix a bug that was resolved regarding vdi-create not setting the sharable flag. I used the sources provided in the source-1.iso from xen.org. Everything is good in this regard, and creating a vdi that has "sharable=true" is possible, but I had a problem that forced me to revert to the older copy of the xapi binary because my XCP box was now being

I''m still running XCP 0.5 on two servers. I am trying to make a few 10Gig Slackware64 13.1 servers (using the Windows 2003 server template). However, every time I try to start the guests in OpenXenManager, they die with something like: Async VM.start Slack64 13.1 #3[''NO_HOSTS_AVAILABLE''] I tried starting the hosts from the xsconsole and got the same results. I

I relocated my hosts to a new data center. The pool master booted fine and I changed the management IP and VMs started fine as well. The slave host started, but it doesn''t show to have any NICs. If I exit to a command line I can list them with ifconfig, but none show up in xsconsole. I can also see chatter on the NIC LEDs and the switch ports. I didn''t find any helpful old posts

Hi, I would like to create backups of running VM''s, is this possible? I found the backup, restore and update function in xsconsole but i can''t backup whole VM''s. I would like to do nightly back-ups of running VM''s on a diffrent server and i was working on a script for this, but i wonder if this is even possible! Thanks, Peter

So I''ve found the issue... But I don''t yet understand the issue. If anyone has any ideas feel free to share. To keep a long story short (cause it took days and I don''t want to bore anyone...) I ended up going through a process of a/b testing narrowing down the conditions that reproduced the failed install. Nearing the end I found that it was only happening on equipment

I noticed that XCP has what looks like the default RHEL/CentOS firewall rules running. Is it safe (from the perspective of no loss of functionality) to disable iptables? I''ve done it already and can''t see any noticeable impact.. Thanks!

On a fresh installation of XCP 1.6 there is no interface in XCP Network Management. While in comman line ifconfig -a shows me both physical interfaces. I would appreciate for an ideas on what. -- Best regards, Makarov Alexey _______________________________________________ Xen-users mailing list Xen-users@lists.xen.org http://lists.xen.org/xen-users

Hi All, I am running Samba3.0 beta 3 installed from RPM's provided on the Samba.org FTP server. My platform is Red Hat 9. I am seeing a lot of errors such as: Aug 6 17:50:18 server3 winbindd[31138]: [2003/08/06 17:50:18, 0] nsswitch/winbindd_sid.c:winbindd_lookupname(103) Aug 6 17:50:18 server3 winbindd[31138]: could not find domain entry for domain AND smbd[27004]: [2003/08/06

Hi. The Readme for the disk says that it includes the sources for ocaml but there aren''t any on the iso. Any thoughts? I''m having a helluva time getting these packages to compile and perhaps using the ocaml sources on that iso could help. Thanks. _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com

---------- Original Message ---------------------------------- From: "Errol Neal" <eneal@bnbtv.com> Reply-To: <eneal@bnbtv.com> Date: Fri, 29 Nov 2002 17:13:39 -0800 Hello, In my further investigation, it seems that winbindd cannot locate my kerberos ticket. Or, at least this is what this log output from winbindd >[2002/11/29 07:04:17, 1]

I've been looking thru manpages and online for help..... I *think* I've got winbind mostly setup (somehow) but it seems to be using the wrong Domain. Some info: I am running RH7.3 Kernel 2.4.18-3 Samba 2.2.7 In my smb.conf file I have: [global] security = Domain workgroup = LMC winbind separator = + winbind uid = 10000-20000 winbind gid = 10000-20000 winbind

Are there any best practice recommendations on RAID & disk type for the shared storage resource for a pool? I''m adding shelves to a HP MSA2000 G2, 24 drives total, minus hot spare(s). I can use 600GB SAS drives (15k rpm), 1TB or 2TB Midline SAS drives (7200rpm). I need about 3TB usable for roughly 30 VM guests, 100GB each, web servers so I/O needs are nominal. I''m also

Hi, I have started the work of packaging Openstack for Debian. I have already the Nova packages ready for upload, and I''m now working on Glance and Swift. Nova can run Xen, but I have been told that it needs XCP. I was wondering what is the best source for me to download and package. I have noticed that I can take: http://xenbits.xensource.com/git/xen-api.git

Hello, My company runs several Internet Cafes in Mexico, where bandwith is limited and very costly. We use Linux to do NAT and firewall stuff and at each location we have about 30-40 stations. I''d like to know if anyone out there has any suggestions about how to use CBQ to limit the bandwith at each station. We only have a 128k circuit. The problem I am having is that since I have that

Hi, I am a newb to XCP and somewhat to Linux. I set up XCP on a test machine and used xe to configure a couple of VMs. The VMs are working fine but if I deploy XCP with only xe to manage machines, the others here will want my head on a plate. I set up a Fedora client on a different machine and installed Virtual Machine Manager. When trying to connect via SSH, I get an error that says