similar to: Xen 3.4.3 don't work with HP DL360 G7

Any tips on solving the following performance conundrum: Asterisk 1.8.12.2 running on HP DL360 G5 and G7s tcpdump running to capture UDP 5060/SIP signaling to .pcap files All calls are ultimately B2BUA client -> asterisk -> PSTN Media stays on Asterisk at all times AGI script has exit handler that connects and updates an external database upon BYE from either side. I know that if exit

Hello, Has anyone out there been able to qualify the Proliant DL360 G7 for your Solaris/OI/Nexenta environments? Any pros/cons/gotchas (vs. previous generation HP servers) would be greatly appreciated. Thanks in advance! -Anh

Hello Mailing List I got a severe network error message at a HP DL360 Server. The kernel log says: ----------------------------------- /var/log/messages ----------------------------------------------------------------- Mar 19 15:45:06 server kernel: do_IRQ: 2.168 No irq handler for vector (irq -1) Mar 19 15:45:17 server kernel: bnx2 0000:02:00.1: eth1: DEBUG: intr_sem[0] PCI_CMD[00100446] Mar 19

hello Since a while we're experiencing completely I/O stalls / stopps with some HP Blade Hardware and FreeBDS 9.1. If it occurs, we have to power cycle the server to recover. The stalls occur only every few days to weeks, so it's difficult to reproduce them; we also tried to do a lot of I/O (e.g. scrubbing nonstop) but this didn't help to reproduce more often; taking load away from

Package: xen-hypervisor-4.0-amd64 Version: 4.0.1-4 Severity: important *** Please type your report below this line *** Hello Debian Team, I have some strange behavior with a DL585 G7 with only two cpu sockets used (Opteron 6238 Interlagos). I use Debian 6.0 with a XEN Kernel. Every time when I start a DomU, the server makes a hard reset without any kernel panic or output. When I start the

Hi list, I have installed CentOS on an hp proliant blade server, bl 460c g7, after installing I've seen that network is not working properly. It recognises around 8 interfaces (?), mii-tool says that there is not any link present on those, and there's only 2 NIC' per bay. I've searched on Hp support page but there's only one driver for storage. Does anybody has had the same

How I can set up CentOS 5 on it if it don't see the drives. -- Juan Pablo De Mola Rodr?guez

Hi. I'm looking at a qlogic qle2462 hba for my dl360 g5. The thread http://www.mail-archive.com/freebsd-stable@freebsd.org/msg99497.html mentions a deadlock when system is loaded. Has this issue been resolved? Are there other PCI Express hba's which are known to work with freebsd stable and dl360 g5? -- regards Claus When lenity and cruelty play for a kingdom, the gentler gamester is

Hello All, Has anyone tried using a HP DL360 G5 with the Advanced iSCSI license? Cheers Tim _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

The machine in question is a DL360 G3 R03 Xeon DP 3060-512/533 (part number: 322471-421). It's the first HP-branded model we've had so far (previously all Compaq branded). It has 1Gb of memory and a couple of drives on the on-board SCSI controller (setup for mirroring in the SCSI bios). No SMP is setup right now (doesn't get far enough to do anything with it!). In any case, this

Hello. Recently I've ran into problems with HP Proliant booting off the network with menu.c32. Configuration -- several identical servers: HP Proliant DL360 G5 HP Bios P58 12/26/2006 Bootblock 09/18/2006 HP SmartArray E200i Controller (128MB, v1.20) Broadcom NetXtreme II Ethernet Boot Agent v2.8.5 When localboot is chosen from menu.c32 menu I get standard "PXE-M0F Exiting ...",

Hi all, Just a couple of quick questions. I have a HP DL360 G4 (dual 3.0Ghzprocessors). The processors are EM64T. I am using a TE411P in the system. 1. Should I run the a x86_64 Linux (CentOS) or just go with the plain old 32 bit version? 2. This being a dual processor system, should I turn on or off hyper thrreading? Thanks..... -------------- next part -------------- An HTML attachment was

greetings does the list at this url cover *all* options or are there some hidden or newer ones by chance? http://www.centos.org/docs/4/html/rhel-ig-x8664-multi-en-4/ap-bootopts.html i am playing with CentOS 4 on some Compaq dual PIII hardware. The first unit is an 1850R with dual 500Mhz. If you need more info please let me know. it is a basic unit with raid controller and a Gig of DRAM etc.

Hi *, I'm running into a problem configuring bonding on an HP DL 360 G4p, running 4.3 + tg3 driver version 3.43f. I'm connecting eth0 and eth1 to a Cisco 2948 (CatOS 8.1(3)) and receiving flapping notices. The ethernet address is that of the primary interface. I have tried several different modes, including balance-rr (0), active-backup (1), and balance-alb (6). All have the

I have been trying to install CentOS 4.3 on an HP DL360 G3 (with dual Xeon 3.2 GHz, a Smart Array 5i, and two 36 GB disks doing RAID 1 mirroring). I''m doing all defaults (including the disk and LVM setup) and using the "Minimal" checkbox at the bottom of the Custom machine type package selection screen, so it''s a very "vanilla" install. It zips through the

Hello List, I have been told to get linux running on two HP DL360G4p machines (ancient rackmount xeon stuff). Unfortunately, while isolinux boots fine from CDROM, and extlinux can boot a USB stick, I cannot get extlinux to boot from the CCISS hard disks (two disks in hardware raid 1 configuration). I searched on google a lot, and found (very old, many years ago) messages saying these

Hello Everyone, I recently installed CentOS 5.5 x86_64 on a brand new ProLiant DL380 G7. I have identical OS software running reock-solid on two other DL380 ProLiant servers, but they are G6 models, not G7. On the G7, the installation went perfectly and the machine ran great for about 2 weeks, when it just seemed to "stop". The system stopped responding on the network, and there was

<!doctype html> <html> <head> <meta charset="UTF-8"> </head> <body> <div> <br> </div> <blockquote type="cite"> <div> On 6 June 2019 22:40 Júlio Covolato via dovecot < <a href="mailto:dovecot@dovecot.org">dovecot@dovecot.org</a>> wrote: </div>

<p dir="ltr"><br> you can also create an archive namespace, and put that on your cheap storage.<br> </p> <div class="quote">On Oct 30, 2019 22:09, Júlio Covolato via dovecot <dovecot@dovecot.org> wrote:<br type='attribution'><blockquote class="quote" style="margin:0 0 0 .8ex;border-left:1px #ccc

Hi, I want to learn about ext3 fs from the basics to the inner details. Some hints about links that have that info well explained? Cheers.