similar to: logging tftpd

Hello, I need help in setting up tftpd-hpa to send a kernel to a client, on a debian woody installation. I did manage the feat when using tftpd to send a kernel to a client which had a separate network interface card, but I would like to do it with integrated LAN. Trials with tftpd failed with error messages starting with 'PXE', and later I learned that tftpd-hpa is needed for the PXE

Hi Friends, I am trying to configure a tftp server on Centos 5.0. get command is working fine but not the put command. I searched on the google and tried few things like 777 on /tftpboot, changing ownership to nobody on /tftpboot and also in /etc/xinetd.d/tftp, adding -c as server_args but still the problem persists. tftp -v localhost Connected to localhost.localdomain (127.0.0.1), port 69

hello, i'm having a wierd problem with 0.31 tftpd-hpa. i'm using xinetd, with this config: service tftp { disable = no socket_type = dgram wait = yes user = root log_on_failure += USERID bind = 10.13.0.254 server = /usr/sbin/in.tftpd

Op 2013-06-10 om 09:48 schreef upen: <snip/> > > > My dhcpd.conf now looks like this: > host rhelclient { > site-option-space "pxelinux"; > next-server 192.168.0.100; > option pxelinux.magic f1:00:74:7e; > option pxelinux.configfile "linux-install/pxelinux.cfg/default"; > option pxelinux.pathprefix

Hi all, I'm trying to setup a TFTP server to serve as repository for the config of all my Cisco network devices. As per the the tftpd man, I've added the "-c" option into the /etc/ xinetd.d/tftp (as follows) but I still cannot get write access (unless the file is already present). [root at chl1 ~]# cd /etc/xinetd.d [root at chl1 xinetd.d]# cat tftp # default: off #

Hello Everyone, I am having trouble with booting a soekris 4826 board.after setting up my tftp,dhcp and web servers ,I log into the board using minicom and type boot f0,which doesn't quite work out. > boot f0 NSC DP83815/DP83816 Fast Ethernet UNDI, v1.03 Copyright (C) 2002, 2003 National Semiconductor Corporation All rights reserved. Pre-boot eXecution Environment PXE-2.0 (build 082)

Hi all, I have a centos 5 box I have setup, current with updates. (I have done this many times on centos 4). I did the yum install tftp-server, changed the /etc/xinetd.d/tftp file as shown. # default: off # description: The tftp server serves files using the trivial file transfer \ # protocol. The tftp protocol is often used to boot diskless \ # workstations, download

On Sat, Jun 8, 2013 at 7:16 AM, upen <upendra.gandhi at gmail.com> wrote: > > > > On Sat, Jun 8, 2013 at 1:44 AM, Geert Stappers <stappers at stappers.nl>wrote: > >> Op 2013-06-07 om 12:20 schreef upen: >> > On Fri, Jun 7, 2013 at 9:29 AM, Geert Stappers <stappers at stappers.nl> >> wrote: >> > > Op 2013-06-07 om 06:18 schreef

Here is a cut and paste from /var/log/messages from our TFTP server Aug 25 05:45:32 SALES in.tftpd[3206]: RRQ from 10.0.0.223 filename pxelinux.0 Aug 25 05:45:32 SALES in.tftpd[3206]: tftp: client does not accept options Aug 25 05:45:32 SALES in.tftpd[3207]: RRQ from 10.0.0.223 filename pxelinux.0 Aug 25 05:45:32 SALES in.tftpd[3208]: RRQ from 10.0.0.223 filename

> > Hi all, > > I have a centos 5 box I have setup, current with updates. (I have done > this many times on centos 4). > I did the yum install tftp-server, changed the /etc/xinetd.d/tftp file > as shown. > > # default: off > # description: The tftp server serves files using the trivial file > transfer \ > # protocol. The tftp protocol is often used to

Hi, when i look in my syslog i see. (syslog) Mar 12 04:40:49 linuxdev in.tftpd[15218]: RRQ from 10.1.5.121 filename scx.elf.gz Mar 12 04:40:49 linuxdev in.tftpd[15218]: sending NAK (1, File not found) to 10.1.5.121 here my client has asked for a file, and tftpd has said that it does not exist in its path (or cannot access it). looking in the tftpd.c (from 0.36) i see that on line 779 this

Good day, Just a quick question- could someone please confirm that this is the correct xinetd configuration (or not) for hpa-tftp? We've noticed that, when under moderate load hpa-tftpd resides in memory, even after there are no connections or even if xinetd is shut down. Under light load the server goes away after each connection, as desired. Thanks in advance! service tftp {

Hello, A host of mine which acts as a gateway for a cluster also acts as a dhcp and tftp server for the cluster nodes. Recently, for reasons that are not really important we changed the interfaces so that eth0 is conencted to our production network and the eth1 network is connected to the cluster's internal network. It was the opposite before. Normally, we want most of the services running on

I configure the system of remote boot. Almost all was done. But one simple problem. tftp doesn't download pxelinux.0 from boot-server, in.tftpd is running at. Problem isn't in pxelinux.0, but in protocol itself. I've created test file "test" in /tftpboot and tried to download it but "Timeout occured". From /var/log/messages: Mar 27 16:32:27 dk in.tftpd[26576]:

Hi I am trying to set up a thin client. I have managed to set up DHCP and TFTP on a Fedora Core 6 server but the problem is when PXELinux on the client tries to load the configuration file. I get the message: Trying to load: pxelinux.cfg/01-00-0c-29-ca-7a-ce Trying to load: pxelinux.cfg/0A000014 etc.. Trying to load: pxelinux.cfg/default Unable to locate configuration file If I use a TFTP

My /ect/dhcpd.conf looks like following: # Sample /ect/dhcpd.conf ddns-update-style ad-hoc; allow booting; allow bootp; #default-lease-time 600; #max-lease-time 7200; option subnet-mask 255.255.255.0; option broadcast-address 10.0.0.255; #option routers 10.0.0.1; option domain-name "nfs.jun"; subnet 10.0.0.0 netmask 255.255.255.0 { range 10.0.0.1 10.0.0.100; } group { next-server

I've used TFTP server on CentOS/RHEL 7 and 8 but not 9, so take my notes with the appropriate grain of salt... JIC, confirm on the TFTP server you have a process socket for it, e.g. $ netstat -a | grep tftp udp 0 0 0.0.0.0:tftp 0.0.0.0:* Your 'systemctl status' output implies things are OK, but worth a check. I don't see a "tftpboot" symlink

If I omit --secure from the tftpd-hpa command line, I then need to e.g. `tftp -c get /var/lib/tftpboot/vmlinuz` instead of plain /vmlinuz, even though I pass /var/lib/tftpboot as the tftp dir in the tftpd-hpa command line. That essentially means that I'm exporting my whole /, which is clearly something I don't want to do. I basically want tftpd-hpa to serve files from /var/lib/tftpboot

On Mon, Apr 03, 2023 at 12:52:41PM -0400, Rob Roschewsk via Syslinux wrote: > Hi All, > > I have a situation where I want to netboot and ONLY use pxelinux.cfg/default. > > It seems to take FOREVER for pxelinux to try all of the config file > file options before falling through to default .... trying each > possible combination multiple times ... increasing the wait time >

Hello, I would like to have the following line (among others) in my /etc/xinetd.d/rsync file : server_args = --daemon --address=<ipaddress_eth0> --log-file=/var/log/rsyncd.log To this end, i am using the camptocamp rsyncd module available from git. Everything works except this line. I thought it was, perhaps, a questions of spaces (this has been discussed on the list before),