Displaying 20 results from an estimated 3000 matches similar to: "Getting issues while separating CA and master servers"
2013 Jun 12
4
certificate problem
When I try to connect to my new puppet master, I get an error because of
a self-signed certificate:
---snip---
# puppet agent --test --noop
Warning: Unable to fetch my node definition, but the agent run will
continue:
Warning: SSL_connect returned=1 errno=0 state=SSLv3 read server
certificate B: certificate verify failed: [self signed certificate in
certificate chain for /CN=Puppet CA:
2012 Jul 26
2
class with multiple package resources does not install RPMs
Hi,
I am able to install my RPM via this puppet code ...
[root@agent1 ~]# puppet apply -v install_named_conf.pp
info: Loading facts in
/opt/puppet/share/puppet/modules/stdlib/lib/facter/facter_dot_d.rb
info: Loading facts in
/opt/puppet/share/puppet/modules/stdlib/lib/facter/puppet_vardir.rb
info: Loading facts in
/opt/puppet/share/puppet/modules/stdlib/lib/facter/root_home.rb
info: Loading
2013 May 14
3
PuppetDB "Failed to submit 'replace facts' command"
I have a small environment with a single puppetmaster and puppetdb on the same node that I get sporadic "Failed to submit ''replace facts'' command" errors from nodes. It isn''t consistent about which nodes are causing the error and I can''t find anything else going on at the same time on either the master or the agent that these errors happen.
Here
2012 Nov 20
2
hiera values issue
Hi, I have a puppetmaster - agent architecture. I have a module for the
vsftpd configuracion in the agents. The configuration of the value
''max_per_ip'' in the agents may vary. This is a line of the manifest:
$max_per_ip = hiera(''max_per_ip'',10)
I want to specify different values for each agent using hiera. The problem
is I am only able to specify the
2012 Apr 25
2
Unable to import a manifest file from a different directory to the one where site.pp is located using environments
Hi List,
Puppet Version: v2.7.13
Question - If I correctly setup multiple manifestdir''s in the puppet.conf
file how can I import a node pp file located in a different directory tree
to site.pp?
My configuration information is below.
In my puppet.conf file I have setup an environment called "stable", within
this environment I have setup the manifestdir, modulepath and
2013 Mar 01
2
Puppet newbie
Hi
I am new in Puppet and i have one error when i test Postgresql module in
infrastructure mode.
I''m using Puppet 3.1.0 in Debian squeeze or 6.0.7
i tape the next command puppetd -t -v and this is the error
info: Retrieving plugin
info: Loading facts in pe_version
info: Loading facts in postgres_default_version
info: Loading facts in iptables
info: Loading facts in puppet_vardir
2013 Oct 12
2
Warning: appears to have a negative number of dependencies
Hello
After add some packagelist to puppet class.
I get lots of warning message "appears to have a negative number of
dependencies".
My puppet master and agent version are 3.3.1.
Here is the log out:
[root@gpu022 ~]# puppet agent --test
Info: Retrieving plugin
Info: Loading facts in /var/lib/puppet/lib/facter/puppet_vardir.rb
Info: Loading facts in
2013 Sep 18
1
All nodes stopped reporting to puppet enterprise console
My install was working for a couple of months until I rebooted my puppet
server. The clients do not report an error when I run puppet agent -t.
I''ve attempted to remove certificates and renew. The clients get new
certificates, but the console still does not update. Even the puppet
server itself is not updating as a client. After reboot the only thing I
have noticed that changed
2012 May 05
3
Error 400 on SERVER - pe_mcollective - missing value of param 'undef'
New install of 2.5.1 on Ubuntu 10.10 server. Multiple (6) new installs on
Ubuntu 12.04 clients running agent 2.7.14-1puppetlabs1 from the puppetlabs
repo generating the following error.
err: Could not retrieve catalog from remote server: Error 400 on SERVER: No
matching value for selector param ‘undef’ at
/opt/puppet/share/puppet/modules/pe_mcollective/manifests/init.pp:89 on
node
2013 Nov 12
1
How to get Puppet Ent Agent for Mac Mountain Lion?
Dear All,
I''m very new to Puppet Enterprise.... I have the following setup so far:
1. Puppet Master (Puppet Ent) on Ubuntu with its own Agent
2. Puppet Agent on MAC Mountain Lion
Everything looked ok but then I noticed this on the MAC (below), which
suggested to me I had the wrong Agent? I''m a little confused on how to get
the Puppet Ent Agent for MAC?
Info: Retrieving
2011 Apr 06
4
SSL issues: Separate CA, multiple load balanced masters
Hi,
I''ve been at it for about 4 days now and I just can''t figure it out.
I''m getting the following error when running puppet agent on my
masters: SSL_connect returned=1 errno=0 state=SSLv3 read server
certificate B: certificate verify failed
At startup, I''m running ntpdate (I''ve read in a lot of places that
this error occurs when date between servers
2012 Oct 09
3
After upgrade to 3.0: Warning: Error 400 on SERVER: Could not retrieve facts for
I auto-upgraded puppet (as usual) using "yum upgrade -y", and now all
agents are getting error 400.
# puppet --version
3.0.0
On agent (any!)
# puppet agent --test
Warning: Unable to fetch my node definition, but the agent run will
continue:
Warning: Error 400 on SERVER: Could not retrieve facts for
build6.[censored]: Failed to find facts from PuppetDB at
abyss.[censored]:8081:
2012 Dec 21
1
Hiera and 'clientcert' fact not working :(
Morning All
I''m trying to use Hiera with Puppet 3.0 to streamline some of my module
configuration...
However I''m having issues using the ''*%{::clientcert}*'' variable as part of
the hierarchy...
Currently, my *hiera.yaml* file looks like:
---
:backends:
- yaml
- json
:yaml:
:datadir: /etc/puppet/hieradata
:json:
:datadir: /etc/puppet/hieradata
2012 Dec 12
1
Puppet Setup - Error: Could not retrieve catalog from remote server: Error 400 on SERVER: Connection refused - connect(2)
I have followed many tutorials including the ones provided by puppetlabs
and I keep seeing the same issues. I began by installing puppet on machine:
puppet001, and puppet master on machine: puppetMaster. The hosts files were
then configured so that both machines were reachable by the machine name.
The puppet.conf files were then updated, and a cert was generated and sent
from puppet001 to
2013 Aug 28
3
agent will not run
Hi,
I wonder why the puppet agent on the server itself will not run:
---snip---
# puppet agent --test
Error: Could not run Puppet configuration client: Puppet::Node does not
respond to from_s; can not intern instances from text/plain
Error: Could not run: can''t convert Puppet::Util::Log into Integer
---pins---
whereas the client on a test box tells me:
---snip---
# puppet agent --test
2013 May 01
0
Re: Error testing deploying Grizzly
I believe the error indicates that hiera was installed as a rubygem which
is not supported on Puppet 3.x. Maybe the error will go away if you remove
the hiera gems?
I think I have gotten around it by adding ''require rubygems'' to the puppet
executable.
I''m copying the puppet-users mailing list b/c I am guessing this is a
common problem.
On Wed, May 1, 2013 at 12:35
2012 Jun 26
5
Next Problem: Puppet 2.7 + Passenger won't connect
OK. What did I booger up this time ?
agent.myexample.org and puppetmaster.myexample.org are the same server.
----------------------------------------------------------------------------
# puppetd --no-daemonize --onetime --debug --noop
debug: Puppet::Type::User::ProviderUser_role_add: file roleadd does not exist
debug: Puppet::Type::User::ProviderDirectoryservice: file /usr/bin/dscl does not
2012 Dec 14
2
Duplicate declaration for invoking a class
Hi everyone,
Here are the manifest I am using:
In file ''*modules/test/manifest/init.pp*'':
class test (
$test = undef,
) {
notice("Here is the message: ${test}")
}
Now in ''*modules/saas/manifests/client/sudo.pp*'':
class saas::client::sudo {
class { ''test'': }
}
Now in ''*manifests/sites.pp*'':
import
2013 Jun 12
3
puppet agent errors for non included module.
Does anyone know why i would get a module error for my ''base'' module that
I''m not even including for a node? I''m explicitly NOT include the ''base'',
yet puppet-client-t2 still errors when i pull it in. Snips from both are
below. Any ideas why this would happen?
Thanks,
JJ
====
site.pp file
[root@puppet-master-t1 puppet]# cat
2013 Oct 18
1
'eval_generate: SSL_connect returned=1 errno=0 state=SSLv3 read server session ticket A: tlsv1 alert unknown ca
Hi, ppl
I dont know what to do.
I configure a new client do sync with my server. the server accept de
client_cert without errors and then when i run the "puppet agent -t" agaion
i got this error output
info: Retrieving plugin
err: /File[/var/lib/puppet/lib]: Failed to generate additional resources
using ''eval_generate: SSL_connect returned=1 errno=0 state=SSLv3 read
server