similar to: IKEv2/IPSEC "Road Warrior" VPN Tunneling?

Buf ... Solved. Problem was that /etc/pam.d/racoon doesn't exists (I found this tip on NetBSD ipsec pages). Simply I have copied /etc/pam.d/passwd to /etc/pam.d/racoon and now all works as expected. Many thanks for your help Ross. Ross S. W. Walker wrote: > > I think it might just use another one like /etc/pam.d/remote > cause I audited the package and it wasn't there.

I set up an ipsec/racoon vpn tunnel test environment. The gateway machines are 192.168.0.30 and 192.168.0.31 on the external adaptor and 10.0.1.1 and 10.0.2.1 internally. The test workstations are 10.0.1.10 and 10.0.2.10. The tunnel seems to be working as in 10.0.1.10 can talk to 10.0.2.10 an vice versa and they can both use the net via NAT, however 192.168.0.30 and 192.168.0.31 cannot directly

Hi: We intend to build IPSec based VPN server on FreeBSD platform so that we can access internal network of a lab. The remote side will use VPN client and could be from anywhere of the Internet, or may be from the another site of the company. From the hnadbook, I saw the sample of site-to-site configurations and we do have one FreeBSD firewall (running ipfw) on both site and another one on

Hi all, I finally got my IPSec tunnel from my Fedora firewall system (running Shorewall 4.0.6) to a remote Draytek Router up-and-running, but I''m having difficulties directing traffic through the tunnel. From the output of "racoon -F -f racoon.conf" and the connection status page of the Draytek I can tell the tunnel is UP, but ping and traceroute requests to several hosts

Hi everyone, First of all, this is my first post in this ML, so I''m not sure that this is the right place for my question (please don''t shoot me down ;)). For the record, I''ve been reading and using LARTC for almost 3 years now, and it''s a great help for anyone who wants to learn linux networking. My problem: I want to setup a tunnel for the following

Hi, When a IPSec tunnel is established between two peers, I understand that the "normal" situation is to have in a given moment two SAs, one for each direction of the tunnel. However, in one of my tunnels (peer P1 running GNU/Linux with setkey and racoon; peer P2 is a Cisco router) there is a large number (around 19) of SAs established (this has been observed in P1 with

Hi, I'm trying to get IPsec running between 2 FreeBSD (VMware) boxes, using racoon2. spmd and iked start up okay, but I get an error when I try a ping across the tunnel. /var/log/messages shows: May 5 13:52:36 biosa-vm4 iked: [INTERNAL_ERR]: if_spmd.c:726: SLID failed: 550 Operation failed May 5 13:52:36 biosa-vm4 iked: [INTERNAL_ERR]: isakmp.c:647:isakmp_initiate_cont(): 0:172.20.36.55[0]

Hi, I want to install a dovecot mail server with postfix. And want to be able to use kerberos for authentication. Has someone experience with this. And maybe some links to info. Is there also someone with experience with SoGo? Philip

https://bugzilla.netfilter.org/show_bug.cgi?id=1082 Bug ID: 1082 Summary: Hard lockup when inserting nft rules (esp. ct rule) Product: nftables Version: unspecified Hardware: x86_64 OS: Debian GNU/Linux Status: NEW Severity: blocker Priority: P5 Component: kernel Assignee:

Dear list, I''m running Shorewall on a dedicated Fedora 7 box. Shorewall is working well as an office DSL router (dynamic IP) with loc and dmz zones. I am now trying to configure IPSec to connect a VPS, "casp", with a static IP to both the firewall and to the loc network behind it. The host to host SA works fine. However, pings from "loc" to "casp" can be

I've been using IPSec and racoon alot lately creating tunnels between FreeBSD machines. Everything works as it should once I've got it running. I do however seem to get delays when one, or both ends of the tunnel drop or are rebooted. On reboot, once the machine starts racoon, it takes two or three minutes for the tunnel to come back up. If I stop and restart racoon, it takes only 60

class wrote on 06/10/2004 11:18:48: > Hello, I have the following situation: > > 192.168.176.0/24 ------ A ========== B ------ 192.168.177.0/24 > 192.168.176.2 pop3 ipsec > racoon > > > policy: (Machine A and B) > ------- > loc vpn ACCEPT > vpn loc ACCEPT > all

class wrote on 06/10/2004 11:18:48: > Hello, I have the following situation: > > 192.168.176.0/24 ------ A ========== B ------ 192.168.177.0/24 > 192.168.176.2 pop3 ipsec > racoon > > > policy: (Machine A and B) > ------- > loc vpn ACCEPT > vpn loc ACCEPT > all

Hi Running racoon on a Freebsd-4.11 machine gives a kernel panic. I am using the racoon from ports directory which comes with the freebsd installation. Steps followed are as shown below: racoon -f /usr/local/etc/racoon/raccon.conf setkey -f ipsec.conf ping -c 1 <ip_of_the_other_gw> The ping will lead into a crash. The crash dump looks like for th ping packet it

Hello everyone, I''m not sure whether to place my question here or in the racoon mailing list or even in that of iptables. I have created an ipsec connection with racoon in tunnel mode to another gateway to connect one subnet on each side to each other. This works fine. Only the ipsec gateway itself can''t send packages to the opposite subnet. Shorewall is configured according

Hi, I have been using IPsec to communicate between a laptop that tracks -stable and a Linksys BEFVP41 router. I only use it infrequently, but it's been working great. My setup is as described in http://grapeape.alerce.com/linksys-ipsec/article.html (which I am planning to submit to the handbook when it's done). I'm no longer able to make an ipsec connection, and I can't put my

Hi folks; This may not even be Samba related, but I'm stumped, so I thought I'd toss this one out here. All the client machines are on 192.168.1.x, all netmasks are configured as /24, etc. I cannot browse the network. I CAN connect to a resource on the server just fine if I specify the full name, but an attempt to bring up the network browser shows the network name (DENNINGER) but

Hi all, I am trying to establish a vpn tunnel between one CentOS5 IPSec server and a roadwarrior client, CentOS5 too. Roadwarrior use ipsec-tools version 0.6.5-8 (that comes with CentOS5) and server uses version 0.7 (downloaded from ipsec-tools website). My server configuration is: path include "/etc/racoon"; path certificate "/etc/racoon/certs"; path pre_shared_key

Hi folks; I have an odd one. I recently upgraded from 3.3.x to 3.4.3 and suddenly lost both the old "smbpasswd" file AND the ability to connect to printers from Windows 7 clients. File server is fine, and everything else is working - I can connect to printers from XP machines, but not from Windows 7 any more. I get an "0x00000000d" error from Win7 when I try to connect....

Hi, I am new to ipsec and trying to connect my bsd server with win 2000. I have succeeded to tunnel using pre-shared key. But regarding certificate , I failed to get success. The following are configuration : racoon.conf path certificate "/usr/local/openssl/certs" ; # "log" specifies logging level. It is followed by either "notify",