similar to: FreeBSD ipsec and NAT

I've been using IPSec and racoon alot lately creating tunnels between FreeBSD machines. Everything works as it should once I've got it running. I do however seem to get delays when one, or both ends of the tunnel drop or are rebooted. On reboot, once the machine starts racoon, it takes two or three minutes for the tunnel to come back up. If I stop and restart racoon, it takes only 60

Hi I hope someone can answer something I'm sure is quite basic. I am following the instructions at https://www.centos.org/docs/5/html/Deployment_Guide-en-US/ch-vpn.html On setting up a VPN The part I am having trouble with is when it show the /etc/racoon/racoon.conf file. But it doesn't say whay you have to do with this file. When I bring up my connection ifup bicester I get RTNETLINK

Centos 5 is still soon end of life. Using it as ipsec gateway is .. Eero 21.3.2016 7.25 ip. "Mike - st257" <silvertip257 at gmail.com> kirjoitti: > On Mon, Mar 21, 2016 at 1:17 PM, Mike - st257 <silvertip257 at gmail.com> > wrote: > > > I second Eero's comment, use a new IPSec daemon. > > > > Openswan was forked and became Libreswan. Paul, now

I second Eero's comment, use a new IPSec daemon. Openswan was forked and became Libreswan. Paul, now a RH employee, was a main developer for the Openswan project before he and others created the Libreswan fork. https://libreswan.org/ EL6 has Openswan EL7 has Libreswan Racoon isn't all that fun to work with. If you have the option, ditch it and EL5 and move to a newer platform

Err. Sounds like security nightmare. 21.3.2016 7.47 ip. "Glenn Pierce" <glennpierce at gmail.com> kirjoitti: > Will ask my boss :) We are hosted on memset so not so easy to update > > Thanks > > On 21 March 2016 at 17:36, Eero Volotinen <eero.volotinen at iki.fi> wrote: > > Centos 5 is still soon end of life. Using it as ipsec gateway is .. > >

I have the following network: External Interface External Interface ccc.ccc.ccc.ccc aaa.aaa.aaa.aaa | | --> VPN <--> Internet <--> FreeBSD Client (NATed extip: bbb.bbb.bbb.bbb) | FW-1 Protected Net ddd.ddd.ddd.ddd/24 VPN: ipsec freeswan (UDP encapsulated tunnel) ccc.ccc.ccc.ccc has port 136/UDP open for

Buf ... Solved. Problem was that /etc/pam.d/racoon doesn't exists (I found this tip on NetBSD ipsec pages). Simply I have copied /etc/pam.d/passwd to /etc/pam.d/racoon and now all works as expected. Many thanks for your help Ross. Ross S. W. Walker wrote: > > I think it might just use another one like /etc/pam.d/remote > cause I audited the package and it wasn't there.

Hi, I am trying to configure ipsec on asterisk. Have configured /etc/racoon/racoon.conf and /etc/raccoon/psk.txt. Also have policy file in same folder. Have run racoon. Still I can't receive calls. Can anyone please tell if any extra step is needed. Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL:

I set up an ipsec/racoon vpn tunnel test environment. The gateway machines are 192.168.0.30 and 192.168.0.31 on the external adaptor and 10.0.1.1 and 10.0.2.1 internally. The test workstations are 10.0.1.10 and 10.0.2.10. The tunnel seems to be working as in 10.0.1.10 can talk to 10.0.2.10 an vice versa and they can both use the net via NAT, however 192.168.0.30 and 192.168.0.31 cannot directly

Hi, When a IPSec tunnel is established between two peers, I understand that the "normal" situation is to have in a given moment two SAs, one for each direction of the tunnel. However, in one of my tunnels (peer P1 running GNU/Linux with setkey and racoon; peer P2 is a Cisco router) there is a large number (around 19) of SAs established (this has been observed in P1 with

Hi. On my FreeBSD 4.8 configured IPFW2+IPF+IPNAT and I use them all: - IPFW - traffic accounting, shaping, balancing and filtering; - IPFilter - policy routing; - IPNAT - masquerading. I want to know, how IP-packets flow through all of this components? What's the path? incoming: IPFW Layer2 -> IPFW&Dummynet -> IPNAT -> IPFilter ? outgoing: IPFW Layer2 ->

Hi, I have been using IPsec to communicate between a laptop that tracks -stable and a Linksys BEFVP41 router. I only use it infrequently, but it's been working great. My setup is as described in http://grapeape.alerce.com/linksys-ipsec/article.html (which I am planning to submit to the handbook when it's done). I'm no longer able to make an ipsec connection, and I can't put my

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 claas@rootdir.de wrote: > I am using kernel 2.6.6 native ipsec with racoon and shorewall 2.1.9 > in production for one week now. I just want to tell you that it seems > to run stable here. > > I am going to extend my setup to a 3 gateway setup soon. > Afterwards I will try to also get roadwarriors in. > I will report on that

Hello everyone, I''m not sure whether to place my question here or in the racoon mailing list or even in that of iptables. I have created an ipsec connection with racoon in tunnel mode to another gateway to connect one subnet on each side to each other. This works fine. Only the ipsec gateway itself can''t send packages to the opposite subnet. Shorewall is configured according

Hi all, I finally got my IPSec tunnel from my Fedora firewall system (running Shorewall 4.0.6) to a remote Draytek Router up-and-running, but I''m having difficulties directing traffic through the tunnel. From the output of "racoon -F -f racoon.conf" and the connection status page of the Draytek I can tell the tunnel is UP, but ping and traceroute requests to several hosts

Hi, I have tried to enable IPSec support for my FreeBSD( 4.11-RELEASE) system. First, I copied the generic kernel configuration file to a file I called MYKERNEL: #cp /usr/src/sys/i386/conf/GENERIC /usr/src/sys/i386/conf/MYKERNEL Then, I added the following three lines to the options section of /usr/src/sys/i386/conf/MYKERNEL: options IPSEC options IPSEC_ESP options

Hi, Could not conceive an working set-up for an IPSEC VPN made with racoon/setkey on which I have one address on my side acting as an SNAT router for all traffic from my network to a network segment on the far side. my network --- my gateway ---------------------- remote network 10.0.0.0/24 - 10.0.0.1 (10.253.0.2) -- tunnel - 192.168.0.0/22 All traffic starts on my side, so if I can

Hi Running racoon on a Freebsd-4.11 machine gives a kernel panic. I am using the racoon from ports directory which comes with the freebsd installation. Steps followed are as shown below: racoon -f /usr/local/etc/racoon/raccon.conf setkey -f ipsec.conf ping -c 1 <ip_of_the_other_gw> The ping will lead into a crash. The crash dump looks like for th ping packet it

> -----Original Message----- > From: Greg Panula [mailto:greg.panula@dolaninformation.com] > Sent: 12 May 2003 11:10 > To: Matthew Braithwaite > Cc: stable@freebsd.org > Subject: Re: iHEADS UP: ipsec packet filtering change > > You don't really need the gif tunnels for ipsec. Gif is more geared > towards ipv4 <=> ipv6 type tunnels. A few of ipsec

Hi! I'm trying to increase security on my FreeBSD 4.8 firewall/DSL router/VPN router. My problem is with firewalling the VPN part. I'm using a tunnel to a RedHat 7.1 box running FreeS/WAN. This tunnel allows traffic from my internal net (172.17.0.0/24) to that box only: spdadd 172.17.0.0/24 $REDHAT/32 any -P out ipsec esp/tunnel/$MYADDR-$REDHAT/unique; spdadd $REDHAT/32 172.17.0.0/24