similar to: MWI issue

We've had several customers report since upgrading them to our new Asterisk 1.6.2.17 server (from version 1.4), that their MWI no longer works. No significant changes have been made to their SIP configuration, nor to their ATA configuration. While not exhaustive, these are the ATAs that don't work: Linksys SPA2102 Linksys PAP2T-3.1.15 Thomson 780 Thomson 784 Unfortunately, this

Hi, I am using Asterisk personally at home. My SIP client (SPA 3000) supports MWI with SIP NOTIFY messages. With a previous version of Asterisk I had no problems with MWI. But now I am using the following version which comes with Trixbox 2.8.0.1, and I have problems with MWI. Asterisk 1.6.0.9-samy-r27 Problem description: When a voicemail is left on the extension, a SIP NOTIFY message is sent

Hi, We have a page on the wiki just for phone reviews, but I think it needs a bit of format change. Instead of individual reviews for each phone, I think each person should review all phones they have worked with and list the phones they have had access to and rank them in relation to each other. Also each review should have a date so the reader can see how fresh the data is to current.

Hello! I'm facing a problem concerning MWI. The problem is: The phone switches off the MWI exactly at the moment the second NOTIFY package for one voice mail arrives. The phone switches off MWI independently if the voice mail has been acknowledged or not before. The behavior in detail: - Once each hour, phone sends SUBSCRIBE - Asterisk receives incoming voice mail for Device 200. - some

After purchasing the Uniden TRU9480 and then the Panansonic 5672, both of which do not have "phone company" compatible FSK/stutter MWI, I finally got smart and found out just which Panasonic phones have this feature. Only the following 5.8G models in their current line have FXO compatible MWI. I purchased the 5771 unit and one remote. I have confimed it does in fact work with Asterisk

I use a TDM400 card to interface with my telco. I used asterisk voice mail. However, if I'm on the telco line while another call comes in, obviously it cannot go to asterisk voice mail but instead bounces to the Telco voice mail. Is there any means by which I can get asterisk detect the Message Waiting Indicator (MWI) from the telco? Is there some application or variable which can be

Howdy I have a question regarding support for picking up when the telco sends a MWI message. My client's setup is a small office with three incoming lines on a TDM400P with iaxy's and a Grandstream as extensions. I am using CVS Head from yesterday. (I was resolving a different issue.) Since they only have two voice lines, with the third as a fax, I am using voicemail from the telco.

On 27.12.18 at 18:14 Joshua C. Colp wrote: > On Thu, Dec 27, 2018, at 1:07 PM, Michael Maier wrote: >> Hi! >> >> I just want to say, that 13.24.1 doesn't fix the problem described in >> the posts above. > > You're going to need to file an issue[1] with traces and actual configuration. > > [1] https://issues.asterisk.org/jira > Before I'm

Hi, I didn't get any response to this posting so thought I'd post again in the hope that anyone who missed the posting the first time may be able to offer some ideas. This problem isn't specific to the particular model of phone - I can see from sip debug that the local extension itself is not being sent any Messages-Waiting headers. Any alternative strategy would also be welcomed

We are upgrading to Asterisk as our company phone switch. We have our own Auto-Attendant, call center and voice mail servers. One issue that we are having right now is our voice mail server sending Asterisk the NOTIFY to turn MWI on our Polycom SIP phones. I see from the research I've done (including previous posts here) that Asterisk did not support external MWI events. Is this still

I'd recommend any of the following, which are all in your price range Snom 300 Polycom IP430 Polycom IP501 Aastra 9112i Linksys SPA-922 Grandstream GXP-2000 Cory Andrews ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Zeeshan Zakaria Sent: Wednesday, November 01, 2006 11:17 AM To: Asterisk

Hello all, I have Asterisk 1.4.26 installed on an OpenSuSE 11.2 server with a Digium 8 port FXO card. The local network is 100Mbps Ethernet and my phones are Linksys SPA-921 or Linksys Analog adaptors. The phones are setup with DHCP, and are on the same flat non-routed network. There is no NAT involved. If I call from extension 6000 to extension 6001, or vice-versa both are SPA-921s.

Hi list, how does one get a SNOM 200 MWI to work with * ?? When I press the MWI button it doesn't connect with voice mail on my * box. thanks

Here's a link to it: http://forums.digium.com/viewtopic.php?t=4363&highlight= Regards, Scott -----Original Message----- From: Scott Keagy Sent: Monday, December 04, 2006 5:05 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [asterisk-users] mwi for voicemail not showing up for realtimeconfig. A while back I posted a fully functional though somewhat elaborate

Hello, all. I have a user who needs to monitor their voice mail box and the general delivery voice mail box. I defined them in sip.conf as follows: [tkeeley](a10f) mailbox=612 at a10, 610 at a10 However, the MWI does not indicate voice mails for 610 and I keep seeing this error message: ERROR[2549]: app_voicemail.c:1630 messagecount: Couldn't find mailbox 610 in context a10 However,

All, I am looking at a little support on this, as I haven't found it on google yet. I have had this work on Callweaver, but am moving to Asterisk for a variety of reasons. My dial plans, and everything else transferred perfectly, though I am not sure they are 'correct' for Asterisk 1.6.1, with simple things like SIP users outlined in the sip.conf file, not in the users file,

Hi, I'm having trouble getting asterisk to report MWI to a Cisco CCME. I record a message in mailbox 29, but the subsequent MWI notifications I see continue to report no messages waiting. Are they reporting for the wrong mailbox? Is there some other option I have to set or change? I'm running asterisk-1.4.22 Since the mailbox is in [home] in voicemail.conf, I've tried things like

asterisk-users-request@lists.digium.com is believed to have said: >Budgetone and MWI > >The message button can be programmed to dial an extension that checks >voicemail >exten => 160,1,Voicemailmain(${CALLERIDNUM}) > Thanks, this is what I was thinking about. Still, how do you get the BT to dial 160? In my Asterisk setting I have the same mailbox numbers reused for the

MessageMelissa - I added the "fromuser=AnyName" to my sip.conf file stations and that, in fact, corrected the problem. The MWI now works flawlessly. I would recommend that Aastra/Sayson pursue this with the Asterisk team so that it is listed as a known issue or to have Asterisk patched to fix it. I will submit a bug on it as well. I'm copying the Users Mailing List on this. For

Hello I am running the following setup in order to make VoIP calls at home. Home Phone <-> SPA3000 <-> Asterisk Home <- IAX2 over Internet <-> Asterisk Office The voice mail for Home Phone is hosted on the Asterisk Office machine. I wanted to have a way to check the status of my voicemail on my home phone directly. In order to do so, I've patched both Asterisk Home and