similar to: question after updating to 6.4

Hello, I'm looking for help figuring out why I am having problems with shutting down a machine. I have tested the machine using Fedora 19 and Ubuntu 12 Live CD's and both power down without issues. I added acpi.debug_level=1 to the grub boot as it was suggested to see more info about ACPI in the logs I found the following ACPI Errors in the /var/log/messages Oct 11

I am looking for an ATA like device but instead of VOIP to analog phone I want VOIP to low level audio out. Something that looks like a sound card output. I know I can use cheap PC's but that then you have HD's to setup etc... HD failures etc... Anyone know of something like that? Jerry

I am sending an email from my machine devcentos5x64. the transcript below (hangs for 60 seconds) at the line: MAIL From:<root at devcentos5x64.msgnet.com> SIZE=56 AUTH=root at devcentos5x64.msgnet.com The email succeeds - but I am trying to figure out the 60 second delay. Neither email server is busy. Nothing is waiting. the DNS on both machines point to the same nameserver. The DNS

I saw an article this morning about the RH developer toolset. basically it includes a couple of packages like PHP python mysql (etc) that are later packages than that included in the released version like a 6.4 for example. So instead of php 5.3 with patches it would be php 5.4 and so on. That is great for a couple packages - but what about more up to date libraries like glib. 6.4 is way behind

hi all, I am trying to get lm_sensors to work. did the yum install lm_sensors service lm_sensors start sensor -s and it says no sensors found. did lsmod | grep it87 and it87 57061 0 hwmon_vid 35905 1 it87 hwmon 36553 1 it87 i2c_isa 39105 1 it87 i2c_core 56129 5 it87,i2c_isa,i2c_dev,i2c_ec,i2c_piix4 Seems like

To continue here with problems on this compaq v2000 laptop, I put kernel source on a USB disk and plugged it into the v2000. NOTHING IS recognized. I tried to manually mount the disk and nothing either... I thought USB was well established.... I thought trying to recompile the kernel for realtek support might get my networking going... I am stuck??? Jerry -------------- next part

hi all, running centos 4.7 i686. I seem to have an o pen r elay sendmail server. How do I close it? I have the STRAIGHT centos install sendmail.mc file. Only thing I changed was: dnl DAEMON_OPTIONS(`Port=smtp,Addr=127.0.0.1, Name=MTA')dnl so as to allow incoming email and not just localhost. however this seems to relay everyone. I looked at http://www.sendmail.org/tips/relaying but it

I am trying to hwclock to set the time. (hwclock -w) this is what I get on standard 5.2 x86_64. hwclock --debug hwclock from util-linux-2.13-pre7 hwclock: Open of /dev/rtc failed, errno=19: No such device. No usable clock interface found. Cannot access the Hardware Clock via any known method. [root at devcentos5x64 src]# ls -l /dev/rtc crw------- 1 root root 10, 135 Feb 6 13:32 /dev/rtc Any

On my machine I have SATA0: HD SATA1: HD these two drives are set as RAID1 SATA2: HD extra SATA3: DVD SATA4: external USB disk Snip from dmesg shows the ATAPI device being detected. ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xe400 irq 10 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xe408 irq 10 ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATAPI: PIONEER BD-ROM

I am trying to plug a USB 2 device in a USB 3 slot. Nothing is being detected in "lsusb". Is there something special I need to do? I am running centos 5.5 x86_64. I thought 3.0 was backward compatible. Nothing special about my device its an RS232 to USB device. It works in 2.0 slot. Thanks, Jerry

What is needed to get DAHDI to start up correctly on CentOS 7 and systemd... I am using DAHDI-linux-complete 2.11.1 I saw mention in my search that it has been fixed after 2.11.1 but cannot find what the fix is. Thanks, Jerry -------------- next part -------------- An HTML attachment was scrubbed... URL:

hi all I have something like 3000 log files in a directory (from data collection). At 4am in the morning cron runs a script of mine that essentiallly trims all files in that directory back to a certain size. Basically does a "tail -c XXXX filename > tmp_filename" I have noticed that only around the 4am-4:15 time frame when the trim is happening does my other process log connection

I was just wondering if there are special tricks people do that compile A LOT on centos? Do RAM disks help or something else I dont about that minimizes your compile time? I presently have and AMD x2 4800+ with 2GIG ram. Just curious if I can reduce any more time out of my compiles. Jerry

I have added the three lines to the sip.conf file based on the latest changes from broadvoice. I can receive incoming calls but cannot place any outgoing calls. The error I get is: *CLI> -- Registered to '69.73.19.178', who sees us as IPADDRESS:4569 -- Attempting call on SIP/Broadvoice/5068012 for application Playback(demo-congrats) (Retry 1) Mar 8 08:35:21 NOTICE[29290]:

I am trying to do an rsync or scp from machine1 to machine2. I am getting arg list to long. I am using centos 5 machine 1 and centos 4.5 on machine2. I am using the default shell which is bash. How can I get past this? THanks, Jerry

I am wanting to use the mkfs.hfsplus as mentioned here http://www.oli.id.au/createosxdmgdiskimagesinlinux but I dont have the command. yum provides "*/mkfs.hfsplus" returns no packages found. Where do I find this command? Thanks. Jerry

Apparently Verizon is blocking or changing packets on port 5060 so my softphone from my hotspot will not work. How do I set asterisk (11.23.0) to run default 5060 for all other devices I have - BUT for my software run on a different port like 5070? I'm using linphone and is easy to change the ports from 5060 to 5070 ( I think). Thanks, Jerry -------------- next part -------------- An HTML

I have one of those new little NUC's and installed Centos 7.1 on it. lspci shows 00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 09) 00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 09) 00:14.0 USB controller: Intel Corporation 8 Series

I was installing centos 5.3 x86_64 on a sempron 2.7G machine with 512M ram. The install started off fine then REALLY SLOWED down about 70% into install. I did have a swap space. after that it just crawled. I tried restart the install a couple times at 512M. Same thing around 70% the slow down. I then put in 1G of RAM and everything zipped on past and finished fine. Does 5.3 have minimum

I have something like 300G I routinely backup. This includes some large 12Gig images and other files. I had been using ext3 on an external USB disk for part of the process. Under ext3 doing "rsync -a /home /mnt/external_back/backup.jun.27.2011" it took 200 minutes. I took the same computer, same external HD and reformatted it for ext4 (mkfs.ext4 /dev/sdd1). I then started the same