similar to: Nested Subnets

Dear all, I am trying to configure a basic TINC vpn between two sites using OpenWRT routers. The link seems to work, the ping between the two routers is ok, but I can't ping hosts between the subnets behind the routers. This is the configuration: ======== SITE 1 (CLIENT) - polimnia (subnet 192.168.4.0/24, gw 192.168.4.1) tinc.conf ------------- Name = polimnia ConnectTo = calliope

I have done it... added on both routers a new firewall zone covering the tinc interface, policy in accept, out accept, fwd accept, interzone forwarding from/to LAN.... when I do it, I am not even able to ping the routers between them, even though the PING PONG is ok in the tinc debug.... 2018-05-24 20:28 GMT+02:00 Naemr . <naemrr at gmail.com>: > did you add a forwarding allow rule from

Hey Saverio, I'd really like the idea of a tinc-1.1-pre package for OpenWRT. I'm currently using tinc-1.1 with an Ed25519-only network, really like the new features and CLI and want to add some OpenWRT routers into the mix. How do you plan to handle things with OpenSSL? tinc-1.1 from git should be able to compile without it (but will then only support the built-in algorithms). Depending

On Tue, Jan 27, 2015, Sandy McArthur Jr wrote: > I use the Tinc 1.0 series since I don't want to support my > own packages. <snip> > I wrote most of http://wiki.openwrt.org/doc/howto/vpn.tinc and that is > what I still use. Since then . . . Ok. I think I'll start with the 1.0 series packages that are already out there and get them working. and on Tue, Jan 27, 2015,

Greetings. I'm new to tinc, but have so far managed to get a couple laptops and a hosted server all connected. They're working as expected, running Tinc 1.1-pre11, which I compiled from source. Next I want to move on to adding my home router into the mix. My routers run OpenWRT. I don't have experience compiling anything from source for OpenWRT, but OpenWRT has Tinc 1.0.25

Hello! I try to maintain a couple off old Openwrt based routers. The routers run openwrt whiterussian, so it quite outdated. But it is a little dangerous to update a remote machine from whiterussian to kamikaze or backfire, this may be usefull for others. I used the openwrt whiterussian 0.9 sdk and the attached Makefile to compile all tinc versions till 1.0.11. Since 1.0.11 the compile process

I already have a package made, if anyone would like me to I could submit it. On 2015-06-13 17:26, Florian Klink wrote: > Hey Saverio, > > I'd really like the idea of a tinc-1.1-pre package for OpenWRT. I'm > currently using tinc-1.1 with an Ed25519-only network, really like the > new features and CLI and want to add some OpenWRT routers into the mix. > > How do you

1. Compress should be in your hosts file, not your config file. 2. Since its a low-end CPU on the router, try using Compression=10 or 11 (fast/best lzo); I use 9 (max zlib) on my ASUS OpenWRT routers & ClearOS boxes. 3. If you're using Backfire OpenWRT, you should be able to use the version of tinc compiled in trunk http://downloads.openwrt.org/snapshots/trunk/ On 9/20/2010 5:22 PM,

Hello, I received this pull request. https://github.com/openwrt/packages/pull/2757/files As I wrote in the comments I am not sure that is the way to go. Packaging a software for a distribution is not just about software development. There are operational issues to be addressed. A lot of people use the tinc package and they expect they configs to survive a package update. Also they expect the

Me and my son are running Tinc over 5 nodes, 3 of them got public address and we using them as server. Each node has its own Lan subnet 192.168.0.0/24. Originally we ran network on Openwrt routers with Tinc many years without any problem, but due to limited RAM on routes and change of one router to not Openwrt supported model, we decided to transfer Tinc installation on Raspberry Pi-s in LAN. In

Hi Maxim See below. root at OpenWrt:/etc/tinc/acmevpn# modprobe -v tun -ash: modprobe: not found root at OpenWrt:/etc/tinc/acmevpn# lsmod tun Module Size Used by Not tainted crc_ccitt 928 0 root at OpenWrt:/etc/tinc/acmevpn# uname -a Linux OpenWrt 2.6.31.10 #1 Tue Jul 23 14:34:17 CEST 2013 mips GNU/Linux root at OpenWrt:/etc/tinc/acmevpn# opkg info

Forget about tinc. I won't work until you solve issue with your kernel. On Tue, Jan 19, 2016 at 9:45 PM, Yazeed Fataar <yazeedfataar at gmail.com> wrote: > this is what happens when I try to run tincd > > root at OpenWrt:/etc/tinc/vpn# tincd -n vpn -D -d5 > > tincd 1.0.21 (Mar 9 2014 18:26:59) starting, debug level 5 > > Could not open /dev/net/tun: No such file

Thanks Graham Please excuse me as I am a noob in linux . I have come across this link through searches. I just dont know how to start... Do I "wget http://www.tinc-vpn.org/packages/tinc-1.0.26.tar.gz" to openwrt vm and then how do I compile it in openwrt? <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> This

You can find tinc package in openwrt repo and install it with opkg or luci. I suggest you first run couple of tinc nodes on x86, just to understand how it works. -- brgds Max On Jan 19, 2016 7:17 PM, Yazeed Fataar <yazeedfataar at gmail.com> wrote: Any help please? Regards Yazeed Fataar On Mon, Jan 18, 2016 at 3:39 PM, Yazeed Fataar <yazeedfataar at gmail.com> wrote: Thanks

Saverio, it looks I'm using tinc on OpenWRT packaged by you) Thank you for it Is something there in that task, what is harder than https://wiki.openwrt.org/doc/devel/packages ? Anyway, I want to try On Thu, Nov 3, 2016 at 5:57 PM, Guus Sliepen <guus at tinc-vpn.org> wrote: > On Thu, Nov 03, 2016 at 03:43:42PM +0100, Saverio Proto wrote: > > > I am not using OpenWrt a

Hello Maxim, did you send the pull request ? Please send an email to the list when you do thank you Saverio 2016-11-05 10:09 GMT+01:00 Saverio Proto <zioproto at gmail.com>: > Hello Maxim, > thanks for stepping in ! > > so, I am not even sure how it works for commit rights, because the > people I was in touch with now forked the project to LEDE. > > Also, I always

---------- Forwarded message ---------- From: eldad hadas <eldadh at hadasbros.com> Date: Sun, Dec 17, 2017 at 9:19 PM Subject: i am having some hard time compiling tinc 1.1 for openwrt To: guus at tinc-vpn.org Hello, i am having some hard time compiling tinc 1.1 for openwrt. i have found a precomiled version for ar71xx, but i need for mips_24kc and ramips/mt7620 i have tried afew

Hi all, TL;DR: when Tinc 1.1 release? I plan to use Tinc for my GSoC project which basically simplifies setup of a Tinc mesh providing IPv6 to nodes in community mesh networks. As I'm new to Tinc I don't know it's history and the changes from 1.0 to 1.1, but it seems to have at least a different syntax in some cases. To make and keep it simple for users, I'd like to stick

Hi Marek I managed to setup everything in openwrt. However I am getting errors when trying to run tinc daemon. Below is my debug output. Please help.. How do I fix tunnel interface error? root at OpenWrt:/etc/tinc/vpn# tincd -n vpn -D -d3 tincd 1.0.21 (Mar 9 2014 18:26:59) starting, debug level 3 /dev/net/tun is a Linux ethertap device Executing script tinc-up ifconfig: SIOCGIFFLAGS: No

Hi Guys I am wanting to test running tinc in openwrt. I need help on how to run it in openwrt. How do I compile tinc ? Regards Yazeed Fataar <yazeedfataar at hotmail.com> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> This email has been sent from a virus-free computer protected by Avast. www.avast.com