similar to: red alarm on span - do channels in the group automatically get skipped over?

Hi, I've always used dahdi-genconf to just create the dahdi-channels.conf and since our PRI is fairly simple (just dump all the channels into one group) it works with dialing with dahdi/g1/(number). I'm trying to understand the file though for my own reference. It seems the file looks like this: group=0,11 context=from-pstn switchtype = national signalling = pri_cpe channel => 1-23

Does anyone have a suggestion on how to handle this? For example, if I have a list of numbers that I want to go out a certain sip channel and another that I want to go out the dahdi device, is there a way to do this? None of the numbers will fit into a pattern, so just plain pattern matching won't do. The most straightforward way would be to just define explicit patterns. Obviously that

Can anyone recommend some kind of virtual t.38 fax software? I'd like to test/debug some of the t.38 stuff, but it'd be much easier if I had a software client that could just generate the faxes from a workstation, rather than having to sit with the fax machine + t.38 ata to source faxes from. There doesn't seem to be much out there, and the stuff that's out there is kind of

Dear, i using this scenario. jitsi---> asterisk---->EPABX------> Local Telephone when i am calling from jitsi to no 88 its giving this message and getting busy tone. == Using SIP RTP CoS mark 5 -- Executing [88 at myphones:1] Dial("SIP/sandeep-00000004", "DAHDI/g0/88,20,rt") in new stack -- Called g0/88 [Nov 15 09:53:54] WARNING[3169]: chan_dahdi.c:7536

Hi! I have an analog line connected to my asterisk and when I try to answer a call I get this -- Starting simple switch on 'DAHDI/7-1' -- Executing [s at from-pstn:1] Answer("DAHDI/7-1", "") in new stack -- Executing [s at from-pstn:2] Playback("DAHDI/7-1", "vm-intro") in new stack -- <DAHDI/7-1> Playing 'vm-intro' (language

Because some users have requested transfer beep confirmations I've switched our phones over to using the asterisk transfer feature instead of the built in transfer functions of the phones. While testing it was working fine, but I changed something in features.conf and suddenly any time I hit transfer (*2), I can only enter one digit before asterisk immediately tries to dial that extension.

Hi, I'm getting the following error from an asterisk 1.6.0.9 installation: [May 20 06:07:18] ERROR[18517]: chan_dahdi.c:10515 dahdi_pri_error: Asked to delete sched id -1??? [May 20 06:07:18] ERROR[18517]: chan_dahdi.c:10515 dahdi_pri_error: No more room in scheduler This repeats a few times, then asterisk crashes. I can't seem to locate any info on this error at all. I'm using

I can't seem to locate any documentation on what this does. I tested it out with a simple static conference room: exten => conference,1,MeetMe(,1aMqw) and a static room defined in meetme.conf: conf => 123456,22,1 Users can get in with either of the pins, but I don't see that it does anything - I can't access the admin menu, nor does it set the user as marked to open up the

So when someone's brute forcing your server is there a way to identify the originating IPs without using a tcpdump? When I get a failed auth on the console it shows 'account at asteriskserver' then tag=as25ca5023 (or some random string, though it's a bit odd as alwaysauthreject = yes is on in sip.conf). Anyway, the logs don't show anything more useful either. Is there

An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040810/16371a21/attachment.htm -------------- next part -------------- ? Hi, I'm using TE410P card with four T1 lines. I've configured all the channels in my /etc/zaptel.conf file. In zttool i'm getting "OK" for the "Span-1" but the other three spans giving

http://www.voip-info.org/wiki/index.php?page=Asterisk+cmd+Answer Can someone clarify what "early media" is? I noticed that NOT answering a call before dumping them into a queue that has music on hold will not set up a leg to push music back over the calling SIP channel. Tossing an Answer command into the dialplan just before moving to the queue alleviates this (in either situation the

Hi, I have 2 servers: one is running 2 B410P cards with 8 euroisdn lines (mISDN) connected on it, everything runs fine. I prepare a new server - HP 360 G8- with 2 HA8 cards each of them 1 module of 4 lines. Already had with this machine an RMA on both cards as they was faulty and crashed the server. What happends is that when I connect cables on the HA8 modules (those cables are unpluged

We have an asterisk frontend terminating all our SIP phones to, and an asterisk backend with a wildcard PRI card in it connecting to the PTSN. The frontend handles 99% of dialplan logic and just hands off anything outgoing to the backend via IAX2, which dials out on one of the open channels. Lately we've been getting a disconnected calls. Keeping the consoles running it doesn't seem to be

Hello! Just got new server with TE420. Not all four spans will be used immediately, but spans not configured or not connected blink red light. Is it possible to turn span off, so my colleagues will not eventally tell me that something is wrong with asterisk? :-) Thank you!

After working fine for a week or so my new Quad E1 asterisk 1.8 system has started rejecting outbound calls from the Nortel BMC 450 it is connected to. The cli fills up with these: sig_pri.c: Ring requested on unconfigured channel 255/255 span 3 Is this likely to be a 1) config error 2) cable issue (I made them) 3) hardware problem with the Digium card 4) software (lib pri) Any clues?

Hi all, I was using dahdi 1.6.2.0.9 version for a long time. We decided to upgrade to 1.6.2.22 a few days ago. After that we started to have some problems with dahdi channels. PS:DAHDI Version: 2.6.0 Echo Canceller: HWEC, MG2 We have 2 PRIs between Ericsson pbx and asterisk and a sip trunk for outside calls. At begining everything works fine but in a few hours, calls from asterisk to ericsson

hello list, i have a question related to zapata.conf,if i do any change in zapata.conf i must restart asterisk or just i restart zapata ,and how to do . ?service zaptel restart? or there is any other command Thanks and regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I have the following setup: Ubuntu 12.04.02 LTS (64 bit) Asterisk 11.2.1 Sangoma 4-Port-Card (A104d) with firmware 43 (german e1-ports connected) WANPIPE Release: 3.5.28 DAHDI Version: 2.6.1 Echo Canceller: HWEC libpri version: 1.4.12 I call via sip into the dialplan. Then I do a "Dial(DAHDI/g1/voicenumber,r)". The call is bridged and everything is fine. "dahdi show

I have a pretty large setup on one of my customers. Digium TE420B (with echo cancelling module), 3 Xorcom Astribanks with 32 FXS each and 1 Xorcom Astribank with 16 FXO. These FXO ports are NOT used for fax/data transmission, as they are connected to cell phones. Not really related to the issue, but there are also 250 SIP phones. The problem is that fax and dial-up connections are really

SYNOPSIS Erratic red alarm T1 PRI on asterisk, but zttool running concurrently during alarm shows no errors, irq misses, or alarms, on any span. Using asterisk and quad Digium T405P, configured as follows: Span 1 connects to ISDN PRI (fractional 8 B channels, D channel 24). Span 2 connects to T1 Mux and analog stations. Span 3 connects to ISDN PRI Nortel BCM hybrid key system digital trunk.