similar to: some help in using the package NUT in a perl script

Hello, I have a Best Ferrups 3.1KVA and I noticed that the percent battery voltage reported from upsc never gets above 69.9%. I believe there is a mistake in the driver. The battery percentage is calculated based on the High Battery Alarm Setpoint (59.6V) instead of the Ideal Voltage which is about 54V (4 batteries x 13.6V). I examined the source code and found that the variable fc.fullvolts is

Description: Fix warning: variable set but not used [-Wunused-but-set-variable]. bugs.debian.org/633756. Related drivers were not tested. Last-Update: Sat, 13 Aug 2011 14:04:48 +0300 Index: b/drivers/belkinunv.c =================================================================== --- a/drivers/belkinunv.c 2011-05-31 13:36:49.000000000 +0300 +++ b/drivers/belkinunv.c

hello, at first I'm sorry my english isn't perfect but I tried to be clear I work with mandriva 2007 and with nut 2.0.1 installed with urpmi my UPS is a MGE Evolution 2200 connected with RS232 in my ups.conf I try to use mge-utalk driver and also mge-shut both seem to work I don't really known which I add to use It's the first point. As I saw on web site, I add maxage 25 in

I have a problem with tests. I always thought that the order of tests doesn''t matter because the fixtures are reloaded before every test method. However, I''ve just discovered that this isn''t true. This is a quote from the "Guide to testing the rails" howto: "... if we had another test method, we wouldn’t have 10 users on the 2nd test because they would

I''ve run into another functional testing issue. Odds are I''m taking the wrong approach, so I''m back to this list again in the hopes of finding the true path. with assert_tag, I''d like to check the values of various table cells and ensure that the proper values are placed in the appropriate places. I written some tests that make good sense to me, and in

I'll be back one more time perhaps I found the reason of these errors Nov 13 11:09:22 mezenc upsmon[3865]: Poll UPS [mgeups at localhost] failed - Data stale it happens when daemon upsd et upsmon are started after the boot obviously, there isn't any errors when upsd and upsmon are started at boot following later ... -----Message d'origine----- De : goudard sabine Envoy? : mardi

Hello, (Saddened for my bad English) I have just created a script to install NUT I manage the events with UPSSCHED and I would like to know how to launch this command via /etc/nut/upssched-cmd every 5 minutes to verify the level of battery of the UPS and decide on the action to be run. Is there an option in the configuration which I was able to forget? Other question : there is another command

On 07/25/2014 04:41 PM, Dean Sauer wrote: > I use darkce as my encoder for my setup, thus it has no means to send the > data needed for my particular streams for the metadata..just FYI, it is > not song data, so it changes quite frequently..... > > So I have a python program which will WORK, but ONLY AS THE ADMIN user. > > Other programs non python, non darkice, can do this

I''ve upgraded to 0.11 this morning specifically to test out the pagination stuff. When that didn''t work (didn''t recognise the command) I deleted my project and recreated from scratch. So in short rails projectname cd projectname edit config/database.yml (my database is postgres by the way) ruby scripts/generate model Recordtype ruby

Hello, I'll be back with my MGE Evolution 2200 connected with RS232 I upgrade nut 2.0.1 in nut 2.2 + psp as you ask me PSP autodetect my UPS and autoconfigure NUT. not really diffcult ! So I didn't change anything but I always have in my syslog these event Nov 13 11:09:22 mezenc upsmon[3865]: Poll UPS [mgeups at localhost] failed - Data stale Nov 13 11:09:27 mezenc upsmon[3865]: Poll

Hey, I have the problem that my timer daemon doesn't start. I checked my configuration more than two times and I don't find the failure. Maybe someone can help me and tell me where the failure could be. --- syslog --- May 13 21:50:34 s-monitor1 upsmon[1674]: UPS usv3 at localhost on battery May 13 21:50:34 s-monitor1 upssched[855]: Executing command: ONBATT May 13 21:50:34 s-monitor1

I'm trying to rename the columns in a list of data.frames using the following... for(i in 1:length(filenames)) { assign(names(get(filenames[i])), c("name", "infood", "time") ) } R returns no errors, but the names are unchanged in the data.frames. The original names were things like > names(get(filenames[2])) [1] "Tc45w4.V1" "Tc45w4.V2"

Hi all, why factorial(150) shows the error out of range in 'gammafn'? I have to calculate the number of subset formed by 150 samples taking 10 at a time. How is this possible? best [[alternative HTML version deleted]]

Hello all, I just installed 3.3. All three disk download ok and when I ran the test on them, all three passed so I thought that the install would go fine and it did. However after using it for about 5 min I have noticed two things. OO does not install by default. When I did a reinstall I noticed that there is not option to even select it. Maybe there is something wrong with my disks, I

I am wondering if it is possible to read.table repeatedly from a list of file names into a new list of table names. For example: filenames <- list.files() then with a function like rf <- function(i) { word??(filename[i]) <- read.table(filenames[i]) } I can't seem to find a function like word?? that will be the object of another operation. If this worked, then I could repeat

Dear List, I'm trying to perform an automatic server shutdown and restart with NUT 2.6.3, openSUSE 12.2 and an Eaton Eco 1600. The server shutdown works but there is no automatic restart when wall power returns. Unlike successful tests with earlier versions of openSUSE, the UPS unit is never switched off. It goes on beeping for as long as I let it. When I pulled the plug from the wall

Hello, since I had delayed the programming of the UPS Device part, now it is time to continue... My Device is "24 V DC modular ATX PSU" which replace the standard ATX Power Supply in PCs and use 15-43 V Input Voltage. The microcontroller is a TI LM3S5T36 Cortex M3 and I get the "UPS" infos using up to 4 Maxim DS1780 and some I?C current sensors. The ATX PSU has 4

A customer is looking to replace or augment their Sun Thumper with a ZFS appliance like 7320. However, the Thumper was used not only as a protocol storage server (home dirs, files, backups over NFS/CIFS/Rsync), but also as a general-purpose server with unpredictably-big-data programs running directly on it (such as corporate databases, Alfresco for intellectual document storage, etc.) in order to

Currently we have problems with our asterisk server connect with an Eicon Diva 4BRI Card to a PBX. Asterisk is running in version 1.0.0 on RedHat Enterprise Linux 3AS with kernel 2.4.21-4.EL. The Diva server is running in version 7.5 Can someone help us in reolving the errors with incoming calls? When we try to call to an extension we get these messages in the CLI: -- creating pipe for

I have a dataframe with names in the first column and wait times between decisions in the second column. Since individuals make multiple decisions, I want the average for each individual. For example, the data might look like this name wtime jo 1 jo 2 jo 1 jo 3 tim 3 tim 2 tim 2 ro 1 ro 2 etc. I'm hoping there is something like mean(dataname$wtime[name]) which will just