similar to: make_dev_physpath_alias

Hi all, I have some problems with my gvinum setup after the system panic'ed. Afterwards the system fails finding the plexes to the subdisks (or at least that is what I can understand after having searched the gvinum source code for the error string in the DMESG log..) The machine is an IBM Netfinity 5000 and the internal HW self tests does not find any errors in the hw. Luckily my root is

Hello, Due to a power outage our file server running FreeBSD 8.0p2 will no longer come up due to zpool corruption. I get the following output when trying to import the ZFS pool using either a FreeBSD 8.0p2 cd or the latest OpenSolaris snv_143 cd: FreeBSD mfsbsd 8.0-RELEASE-p2.vx.sk:/usr/obj/usr/src/sys/GENERIC amd64 mfsbsd# zpool import pool: tank id: 1998957762692994918 state: FAULTED

Hi: Where can I find a list of properties (-o/-O property=value) for creating a zpool? I meant something like: #zpool create \ -o ashift=12 \ -0 dedup=off -O autoexpand=off -O atime=off \ -O canmount=off \ -O compression=lz4 \ -O normalization=formD \ -O mountpoint=/jail \ tank \ mirror \ /dev/gptid/diskname0 \ /dev/gptid/diskname1 \

Ok, So this is really more of an observation than anything else.? I had a FreeBSD 10.1 server that was running great. Some SSL issue came up, or I upgrade Dovecot in ports - something occurred and the machine started rebooting randomly.? It would run for 2 weeks, then reboot.? It might run for 5 days and then reboot. So I started doing more FreeBSD upgrades, thinking it was a kernel issue. The

I have a GPT formatted disk where I recently expanded the size of a partition. I used "gpart resize -i 6 ada1" first to expand the partition to use the remaining free space and then growfs to modify the FFS file system to use the full partition. This was all done in single-user mode, of course, but when I enter "exit" to bring the system up, it failed to mount /usr. This was

Hi, I've installed a FreeBSD (stable 9.2) as a guest on ESXi 5.5. I've added Adaptec Controller via passthrough. Unfortunately FreeBSD does not show hard drives. Any clue? aac0: <Adaptec RAID 5805> mem 0xfd200000-0xfd3fffff irq 18 at device 0.0 on pci3 aac0: Enabling 64-bit address support aac0: Enable Raw I/O aac0: Enable 64-bit array aac0: New comm. interface enabled aac0:

Can anyone help me here? ----- Forwarded message from Larry Rosenman <ler at lerctr.org> ----- Date: Sat, 9 Nov 2013 08:46:26 -0600 From: Larry Rosenman <ler at lerctr.org> To: freebsd-stable at freebsd.org Subject: 10-BETA3: Bad negotiation on AHD controller User-Agent: Mutt/1.5.22 (2013-10-16) Ever since I put 10 on this box (source upgrade from 8), I've been getting slow

Hello, This afternoon I wanted to upgrade to 7.1 two good old dell PowerEdge servers which were running FreeBSD 6.x. It went fine and quickly on the poweredge 1950, but it failed completely on the poweredge 1850. Facts: - boot cd and setup / operation of freebsd 6.x or 7.0 is fine Message log abstract: $ uname -v FreeBSD 7.0-RELEASE-p7 #0: Sun Dec 21 08:31:52 UTC 2008

I'm running FreeBSD 9-STABLE as a guest under RHEL 6.4 KVM virtualisation. I have networking and storage in the FreeBSD guest using the Virtio drivers (with the virtual disk set to "Virtio" in the definition on the host). Everything is working nicely: I have a vtnet network adapter and see vtbd devices for my virtual disks in FreeBSD. Performance is much better compared with an

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi list, I am trying to setup a DomU with linux-2.6.18-xen.hg in order to test Remus on a Debian Squeeze 6.0 / Xen 4.0.1 (2.6.32-5-xen-amd64) Dom0. After applying several patches to the Debian Squeeze Xen packages, I have built the linux-2.6.18-xen.hg, but when I start my DomU, I have got this error message : Error: (2, ''Invalid

Hello, I am trying to use a 1.5TB Eonstor raid array with FreeBSD 7.0, but I don't understand whether it is the raid or the scsi card or something else that is causing the computer problems when accessing the raid. My problem is that soon after recognizing the attached disk during boot, FreeBSD appears to hang for about 10 seconds and then says ahd0: Recovery Initiated - Card

Hi all, We have a server with a LSI 9240-4i controller configured in JBOD with 4 SATA disks. Running FreeBSD 9.1-Beta1: Relevant dmesg: FreeBSD 9.1-BETA1 #0: Thu Jul 12 09:38:51 UTC 2012 root@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 CPU: Intel(R) Xeon(R) CPU E31230 @ 3.20GHz (3200.09-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x206a7 Family = 6 Model =

Update.? Only a single reboot has occurred since changing defalt_vsz_limit from 384M to 512M.? It would seem that something the users are doing is causing that virtual memory size to be exceeded (possibly a mailbox search?), and when that occurs Dovecot/FreeBSD is not handling the event as smoothly as expected. Here's my dmesg for more basic info. Sep 17 11:25:39 romulus syslogd: kernel boot

Hi. I'm running the 9.1-RC1 release. At the end of the boot sequence, I see: mps0: mpssas_scsiio_timeout checking sc 0xffffff8000759000 cm 0xffffff8000784380 (probe19:mps0:0:19:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 length 0 SMID 240 command timeout cm 0xffffff8000784380 ccb 0xfffffe0006918000 mps0: mpssas_alloc_tm freezing simq mps0: timedout cm 0xffffff8000784380 allocated tm

how to use single login page for users in four models -- Posted via http://www.ruby-forum.com/. -- You received this message because you are subscribed to the Google Groups "Ruby on Rails: Talk" group. To unsubscribe from this group and stop receiving emails from it, send an email to rubyonrails-talk+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org To post to this group,

sorry forgot to follow the protocol, now included RFC in the subject. Hi, Appears that no one is working on the auto-snapshot feature for btrfs, so here I am implementing the same. Below is a draft on the feature list. Any comments / questions / suggestions are welcome, please do let me know. btrfs auto snapshot feature will include: Initially: - configurable timely

v2: wrap commit message, "PATCH libldm" prefix. v3: correctly initialize and free GLib resources. v4: gtk-doc is updated to reflect presence of new volume GUID field. The result of this patch might be used by libguestfs to return drive mappings for LDM volumes. Note, that "show volume" ldmtool command already returns hint which is a drive letter assigned by Windows to

Hi, I am running OpenStack Cluster and use libvirt + cgroup to limit vm’s performance https://wiki.openstack.org/InstanceResourceQuota What I am confusing is.. 1. After running a vm instance with some croup limit applied, I can’t find any related cgroup settings. 2. Can I change limit value after instance is running? like change disk_read_iops_sec from 10 to 20. One of the xml file like below.

I am seeing this same error repeating several times. I used ADExplorer to search LDAP for the GUID, but it doesn't find it anywhere. I'm not sure what is causing this error, or what the offending object is in the tree. [2012/09/16 19:52:42, 0] ../source4/librpc/rpc/dcerpc_util.c:660(dcerpc_pipe_auth_recv) Failed to bind to uuid e3514235-4b06-11d1-ab04-00c04fc2dcd2 for

Hello there, I've got a question about SATA. I've got ASUS P5GC-MX/1333 with ICH7. (SATA2 support) A few HDD with SATA2. system: uname -a FreeBSD diablo.miekoff.local 9.1-STABLE FreeBSD 9.1-STABLE #1 r246666: Tue Feb 12 00:19:07 MSK 2013 root at diablo.miekoff.local:/usr/obj/usr/src/sys/DIABLO64 amd64 camcontrol info camcontrol iden ada2 pass2: <ST3500320AS SD1A> ATA-8 SATA 2.x