similar to: Asterisk Management

I see that Asterisk@home and FreePBX are going along similar lines with web based management interfaces.. My Asterisk box has one analog phone, one analog line, 3 SIP phones, IAX inbound numbers, an IAX outbound trunk, IVR menus and voicemail boxes in different contexts for each of the inbound numbers.. Soon I will be adding one or more IAXy devices.. Would either Asterisk@home's or

Hi all, I am probably missing something ultimately obvious, but I have a problem configuring freepbx... Using Edgy Eft with the cvs freePBX 2.2.1 and followed the Ubuntu installation guide on freepbx.org. System pxe-boots from a server with NFS root on same Using * 1.2 current (from source, not .deb's) Using mISDN-streams (from source, not .deb's) Using freePBX-2.2.1 (from source, not

Hi, I am facing issue while generating a dial plan for the following case: all caller should be asked a code to enter than All the callers should be connected one extension. also tell me testing scenario : I have pbx setup and currently I have soft phones to use as extension. Currently I have created a dial plan using vdp I tried submitting it here but I don't know how to extract text

Greetings- First, my apologies for the OT post. Yes, I understand this is not the FreePBX-users mailing list. But, there are a large number of people that use FreePBX and I'm hoping they can be of assistance. I have a system running Asterisk 1.4.27 (see... relevance!!!) and FreePBX 2.6.0. There are a large number of inbound routes configured for the various DID's coming in via PRI, SIP,

hello: Does asterisk-16.1.1 support freepbx by default? /contrib/scripts/install_prereq install ./configure make make install make config make freepbx // I run this command without success. after then, we can access the freepbx GUI? this website show it work: https://www.sinologic.net/2018-12/la-ultima-version-de-asterisk-16-incluye-un-comando-para-instalar-freepbx.html --------------

I'm currently reviewing the latest release of FreePBX (formerly known as Asterisk@Home). Do either of you know whether FreePBX is robust enough to handle multiple clients, or have any recommendations on front-end Web interface to manage client config & provide clients access to manage their level of access (similar to how Vonage, Teliax, and others provide client access to their web

do you have selinux enabled? It should not be. p p.s. - if it comes to re-installing, you can backup all your settings with the freepbx backup utility and then restore so that you don't have to re-enter everything. From: "Lachek Butalek" <lachek@gmail.com> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users@lists.digium.com> Date:

Thank you. I read that last yesterday afternoon, and I could've sworn I tried that but I will look into it again (I've tried so many different things it was getting cloudy what I've tried and what worked etc, combined that the extension config gets messed up after playing with it so much so I'm often recreating it as well). I also found a bug report in the FreePBX bug tracker

Hi all, I am trying to install Vicidial in an existent FreePBX installation (I'm using Xorcom packages for Debian Etch), but I didn't find any documentation, I found only this guide [0], but is for trixbox only, do you think it will work on FreePBX on Etch? [0] http://iptn.org/vicidial/index.html Regards, Diego Quintana Cruz

Hi Guys, This is something related and yet un-related to Asterisk. I have a FreePBX/Asterisk server running and I want to trace everything that FreePBX does to MySQL. Is there a verbose CLI to MySQL that I can pull up on terminal and make configuration change to FreePBX and see it in real-time on the terminal as to what is added to which MySQL table and where? Thanks -------------- next part

I am really a beginner of PRI ISDN board, I am wondering if there is a "quick start" chan_dahdi.conf configuration I could use. I tried to install two "FreePBX" boxes follow the instructions from "http://www.cadvision.com/blanchas/Asterisk/DahdiT1trunk.html" connected them between PRIs, It worked. And now if I refer the FreePBX "chan_dahdi.conf" it looks

(Try again from the proper email address) --Rob -----Original Message----- From: Rob Thomas Sent: Thursday, 22 June 2006 12:22 AM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] syntax error That's freePBX or AMP code that we've since fixed - The replacement line is exten =>

I was just wondering if there are any problems using the latest FreePBX with SATA Raid 1 using hardware assisted software Raid like most modern chipsets support? I know that Digium and FreePBX were not recommending it awhile back but I think that was based on 2.4 Kernel and Digium hardware issues. I am assuming it is not a problem with the latest FreePBX using 2.6 Kernel and Sangoma cards? Any

Lukasz Sokol wrote: > but have you considered a web-managed config-builder such as FreePBX? > Instead of building your dialplan from scratch ? I've never used FreePBX, but, after having looked at its website, I think I have a general understanding of what it can do. What I don't understand is how FreePBX answers my question about the Linksys SPA3102 being good for a mission

I love the added apps installed with trixbox, ARI, Web-Meetme, FOP, and Reports are great. FreePBX on the other hand, is nearly impossible to do everything with. Trying to edit the configs manually proves impossible due to the excessive use of includes and macros. It is kind of like watching someone try to bite their own ear off. Has anybody tried to wipe all the configs clean and program the

Hello, >From some days ago, when i made changes in web interface to asterisk that comes with trixbox (freepbx), this dont reflect the changes in asterisk configuration. I has reviewed the file permissions in /etc/asterisk and all files are writable to asterisk user. In freepbx all appears to be ok (i dont see any errors...). Anyone can help me with this problem? Thanks in advance, PS.

Is anyone using FreePBX in production level systems because I'm just wondering if its stable enough to use. Currently I'm editing my own *.conf scripts but it sure would be nice if there were some sort of web interface for other people to use. The only thing holding me back is the stability of the FreePBX package... Any comments on this? Thanks in advance. Regards, Min Chang

Hello everyone, I?m new to Asterisk and I have a question. There is a phone call between two users, then they are talking to each other directly or by the server. I mean all packets from the user A to user B will be send directly to each other or will those packets from user A must be send to server and server will send to user B. Thanks. -------------- next part -------------- An HTML

Does FreePBX support virtualization of its services? For example, can I use it to provide virtual PBX to different clients under the same instance of FreePBX? Or is it more geared to single office-type installation? Thanks, Daniel

Dear list, I've set up an RPM repository with several asterisk-related RPMs that I think contain some improvements upon what are already out there. The first goal is to be able to build an Asterisk + FreePBX system on CentOS 5 with the EPEL repo enabled; in our environment, where all our systems are under configuration management, either an appliance-type solution or a manual