similar to: Issue with .siren14 sound files

I've got a fresh (1 day old) svn trunk release SVN-trunk-r225360 of Asterisk and I'm trying to get it to accept a SIREN14 call from Polycom's softphone. Having trouble with SDP negotiation, I want to only allow SIREN14 and nothing else. I also want to record and playback files, any tips on what the Record function parameters should be? In sip.conf I have: disallow=all

Sorry for a possible retransmit: the first was sent from an incorrect email address. I'm trying to use the Polycom SoundStation IP 7000 with Confbridge. But the transcoding from siren14 to slin32 is via slin. First, it seems odd that there's no transcoder directly to slin32 since anything else will lower fidelity. But, more importantly, there is transcoding from siren14 to slin16 and

I am not sure what you mean by the ful SIP signaling? Here is the trace for the sip.conf which works successfully. Below that, I will include the trace for the pjsip.conf which it seems Vitelity isn't accepting the ACK in response to the OK ---- SIP --- <--- Transmitting SIP request (1004 bytes) to UDP:64.2.142.93:5060 ---> INVITE sip:8005555555 at 64.2.142.93 SIP/2.0 Via: SIP/2.0/UDP

Hi, I am facing an issue while testing the video mail service of Asterisk. I have two different setup on one setup client being used is Mercuro while on the other client is Android based. On the Mercuro setup video mail is stored and retrieved properly while with Android based setup video?mail is not stored (audio is through). Both the client?use H.264 codec with following sdp information:

Hi, I've a problem configuring my Asterisk. What I try to reach is to interconnect a Tandberg Visioconference (SIP) world with my Asterisk (SIP) with 1 constraint I can't change : "every RTP flow needs to pass THROUGH Asterisk, and are NOT nated" What I observe : - a call made from a SIP Phone registred in Asterisk to Tandberg works (voice and video bidirectionnal) - a call

Hi, I'm using Asterisk 13.x and have defined a pjsip TCP IPv6 transport: [transport-tcp-ipv6] type=transport protocol=tcp bind=[2001:1234:5678:abcd::2]:5060 I also have an IPv4 version of that: [transport-tcp-ipv4] type=transport protocol=tcp bind=10.75.22.8:5060 I've then configured an endpoint to use it: [outgoing] type = endpoint context = default dtmf_mode = none disallow = all

Hello folks, for a customer of us we are trying to make asterisk and windows RTC library work together, but without success. We *need* to use gsm codec, so in the "peer" section we have disallow=all allow=gsm the sip signaling is ok, and when sniffing we got this session description: INVITE from windows RTC: v=0. o=- 0 0 IN IP4 172.31.9.130. s=session. c=IN IP4 172.31.9.130.

I'm trying to interface Asterisk with an Alcatel PABX and trying to find a code that works well. It says it doesn't support ulaw, though it doesn't reject it. It supports G.729, and that works fine, but we'd prefer not to use compression. When I use alaw, the path from Asterisk to the Alcatel is completely clean, but the other way has a set of clicks that kind of sound like

Hello List; I am facing a trouble with a sip trunk on asterisk 1.4 and asterisk 1.8 and I am getting the following debug, can someone advise me about the solution: <--- SIP read from Provider_IP_Address:5083 --->INVITE sip:22021782 at Asterisk_IP_Address:5060 SIP/2.0?Via: SIP/2.0/UDP Provider_IP_Address:5083;branch=z9hG4bKn1va9h109091cms8h5a0.1?From: "1828444" <sip:1828444 at

Hello everyone, A few days ago I had a problem with a couple of extensions. I have about 12 Aastra 6731i phones, 6 are at our main office and 6 more on remote branches. We use VPN to communicate to our branches so there's no NAT involved any where. The problem I had was that I couldn't call from two extensions located at two branch offices. But I could call to them just fine. On any call

I'm seeing Asterisk crashes with the following frame at func_speex.c:188: (gdb) p *frame $6 = {frametype = AST_FRAME_VOICE, subclass = {integer = 0, format = 0xe2f9e20, frame_ending = 0}, datalen = 0, samples = 640, mallocd = 1, mallocd_hdr_len = 232, offset = 64, src = 0x2ac07413e7f8 "siren14tolin32", data = {ptr = 0x3cab9378, uint32 = 1017877368, pad =

Hi Everyone, 1- Are the Siren7 and Siren14 the G.722 HD voice codecs? 2- Are these codecs only for Polycom units or are they universal across all other SIP phones that advertise the HD voice codec like Aastra? 3- What is the main difference between the two and is it advisable to run these over the INTERnet (not INTRAnet)? Thanks -------------- next part -------------- An HTML attachment was

Hello, a person trying to call me by my phone number is getting the error 488 Not acceptable here. I googled that error, seems like this error is normally caused by a failed codec negotation, though I have no clue how I could have read this out of the logs. Anyway, my setup is as follows: Asterisk 1.8.13.0 - NAT - Sipgate SIP Provider The user calling me is also using Sipgate and is calling my

I am debugging an intermittent issue of missing audio on calls that come from a SIP provider into our asterisk-11.10 installation. Sometimes, incoming calls from this provider work correctly, with audio streaming in both directions. Other times, with the same setup, the calling party is unable to hear the IVR recording from the asterisk installation, although in fact the streaming is supposed to

We are experiencing an issue with our Cisco 9971 and 8945 phones where H264 video calls are connecting at 176x144 resolution instead of 640x480. Soft clients can connect at higher resolutions and the 9971 can even receive video at a higher resolution (although it still sends 176x144). I contacted one of the developers and he suggested the passthrough of SDP attributes is not working correctly.

Still trying to make my Asterisk PBK talk to our Nortel Phone Switch (C15k). Nortel did an upgrade which changed a bunch of things today, so I thought I'd give it another shot. It looks like I'm much closer this time, but still no go. Can't do calling in either direction. Anyone have any ideas? Thanks! Shawn [nortel] host=10.0.0.10 insecure=very type=peer qualify=no

? HI ? I have asterisk 1.6.13 running. My ATA are connected via vpn (openvpn) ? Out going calls from asterisk to the ata works fine Incoming calls from the ata to asterisk cuts off with the error msg ? Maximum retries exceeded on transmission 70854efe-4157e3a8 at 10.168.7.103 for seqno 102 (Critical Response) -- See doc/sip-retransmit.txt. [Dec? 6 13:52:43] WARNING[3921]: chan_sip.c:3858

[asterisk-users] Asterisk <-> Nortel Phone Switch Date: Thu, 29 Nov 2007 07:52:17 +0000 (GMT) X-Mailer: sendEmail-1.52 MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----MIME delimiter for sendEmail-20854.4017086787" This is a multi-part message in MIME format. To properly display this message you need a MIME-Version 1.0 compliant Email program. ------MIME delimiter

Hi All, This may be an off topic but I'm not sure who else would know the answer. I'm playing around with Asterisk and Polycom phones. I see Polycom supports quite a few codec. The usual ones and these: G722 Siren14.24kbps Siren22.32kbps Siren14.32kbps Siren22.48kbps Siren14.48kbps Siren22.64kbps G7221.16kbps

Hello: Here is my sip and extentions configuration and the log of x-lite, because i don`t can call inside my LAN with asterisk PBX 1.2 and i don`t have NAT. i hope you can help me. SIP.conf [default] include=>anexos include=>anexos1 include=>anexos2 [anexos] exten=> 100,1,Dial(SIP/100,0) exten=> 100,2,Hangup [anexos1] exten=> 101,1,Dial(SIP/101,0) exten=> 101,2,Hangup